JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza Need some help pricing up some work on my is200

Need some help pricing up some work on my is200

Need some help pricing up some work on my is200

Pages (2): Previous 1 2
Lewed_is200
Member
99
10-12-2019, 01:14 PM
#11
FirebirdPhil If you use a brake like clamp (as you should) then remove the calliper you will probably get away without bleeding the system. Some people use a mole-grip instead of a dedicated clamp, just be careful about how much pressure you apply. Its an easy job on the IS200.

So if I was to clamp the hose then remove the old caliper would I have to fill the new caliper up with brake fluid then refit that would be ok or would I still need to bleed to make sure there's no air in the system?
Lewed_is200
10-12-2019, 01:14 PM #11

FirebirdPhil If you use a brake like clamp (as you should) then remove the calliper you will probably get away without bleeding the system. Some people use a mole-grip instead of a dedicated clamp, just be careful about how much pressure you apply. Its an easy job on the IS200.

So if I was to clamp the hose then remove the old caliper would I have to fill the new caliper up with brake fluid then refit that would be ok or would I still need to bleed to make sure there's no air in the system?

FirebirdPhil
Posting Freak
7,101
10-12-2019, 01:21 PM
#12
Fit the new calliper and when its all back together take the fluid cap off make sure there is plenty of fluid in there, fully open the bleed screw and then take the line clamp off, gravity will bleed it for you, done this many times and never once had to bleed the entire system. A Saab tech showed me this method, it works, its simple and free.

Whenever doing break jobs use a line clamp, this stops the worst fluid in your system going up into the master cylinder.

"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
10-12-2019, 01:21 PM #12

Fit the new calliper and when its all back together take the fluid cap off make sure there is plenty of fluid in there, fully open the bleed screw and then take the line clamp off, gravity will bleed it for you, done this many times and never once had to bleed the entire system. A Saab tech showed me this method, it works, its simple and free.

Whenever doing break jobs use a line clamp, this stops the worst fluid in your system going up into the master cylinder.


"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"

is300_dino
Posting Freak
3,556
10-12-2019, 01:40 PM
#13
dont use clamps if you have aftermarket braided steel lines you could damage them

jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
is300_dino
10-12-2019, 01:40 PM #13

dont use clamps if you have aftermarket braided steel lines you could damage them


jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place

Lewed_is200
Member
99
11-12-2019, 03:06 AM
#14
Will this clamp be ok?

120972806643
Lewed_is200
11-12-2019, 03:06 AM #14

Will this clamp be ok?

120972806643

FirebirdPhil
Posting Freak
7,101
11-12-2019, 10:16 AM
#15
Not used them so I can't comment either way.

"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
11-12-2019, 10:16 AM #15

Not used them so I can't comment either way.


"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"

Lexuspat
Administrator
6,827
11-12-2019, 10:45 AM
#16
I would say that's a bit OTT, any car shop (halfords) sell brake line clamps I have 2 types a metal version and a plastic one, just what I've got over the years both do a great job

[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team
Lexuspat
11-12-2019, 10:45 AM #16

I would say that's a bit OTT, any car shop (halfords) sell brake line clamps I have 2 types a metal version and a plastic one, just what I've got over the years both do a great job


[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team

Pages (2): Previous 1 2
Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 4
Views 317
13-12-2023, 02:06 PM
Last Post by Moley
Replies 3
Views 461
09-11-2023, 03:46 AM
Last Post by Dinho
Replies 17
Views 676
06-11-2022, 01:49 AM
Last Post by Rabster
Replies 4
Views 1,096
02-11-2022, 10:55 AM
Last Post by Sparkystav
Replies 2
Views 301
06-08-2022, 11:58 AM
Last Post by Brad92
Replies 38
Views 1,108
23-02-2022, 01:20 PM
Last Post by beamstezza
Replies 2
Views 345
18-10-2021, 02:04 AM
Last Post by Rabster
Replies 7
Views 446
03-09-2021, 11:04 AM
Last Post by FOSSIL FUELS
Replies 1
Views 481
29-08-2021, 09:59 AM
Last Post by Sparkystav
Replies 35
Views 7,689
04-08-2021, 04:34 AM
Last Post by cjoseph