Toyota Supra TT
Toyota Supra TT
Hi, here we have Greg's Twin Turbo Supra that came to Invisible Touch Detailing in preperation for Dragonball 2013. The vehicle was to receive a stage 1 paint enhancement and engine bay detail. This was the car on arrival...
To start off the engine bay was degreased using APC and a selection of brushes
APC was then used to cleanse the fuel cap, window rubbers, mirrors, scuttle panel, lights, badges, door and boot shuts
Bilberry was used on the BBS alloys and APC on the tyres
The vehicle was jet washed and snow foamed
It was then washed using the 2 bucket method with Shampoo Plus, dried and taken inside to be inspected and have the paint depths measured prior to machining
A few shots whilst inspecting paintwork under halogen lighting
Using the Makita rotary, 3m polishing pad and backing plate and a mix of Meguiars #80 and #83 polish
Onto the rear quarter
Up to the roof
Moving around the vehicle
Passenger door
Once all polishing was complete, paintwork was wiped down with IPA to remove any remaining polishing oils. Lime Prime Lite glaze/pre-wax cleanser was applied by hand and was then sealed with Collinite giving the owner a great base for future product application.
All glass was polished inside and out. The interior was hoovered, dusted and cleaned with APC. The exhaust was polished. Tyres dressed with Endurance Gel. Aerospace 303 was used to dress all rubbers and plastics in the engine bay.
These were the final pictures
Your work continues to astound me! Beautiful!