Changing rear discs
Changing rear discs
11-03-2020, 11:17 AM
PS if that does not work screw the wheel nuts back on just to cover the threads the hit it on the front between the threads.
Edited 22-04-2013, 09:02 PM by iceman.
make shore the hand brakes off if so use a block of wood and a hammer to the back turning it every now and again or just use a rubber mallet if you have one .the shoes are most likely stuck open.hope that helps
PS if that does not work screw the wheel nuts back on just to cover the threads the hit it on the front between the threads.
11-03-2020, 12:55 PM
sprinter2012
11-03-2020, 12:55 PM #3You need to line up the inspection hole to a certain position on the hub, then poke a screwdriver through the hole and spin round the tension adjuster for the handbrake pads to back them away from the drum. Chances are they are just getting wedged on the lip they have worn inside the drum part of the disc.
Recently Browsing
1 Guest(s)
1 Guest(s)
Recently Browsing
1 Guest(s)
1 Guest(s)
Related Threads…
Replies 16
Views 801
Views 801
22-08-2018, 09:36 AM
Last Post byel_bandido
Last Post by
Replies 6
Views 482
Views 482
11-07-2018, 10:12 PM
Last Post byrob
Last Post by
Replies 23
Views 1,552
Views 1,552
03-01-2018, 09:09 PM
Last Post byBandit
Last Post by