brake caliper carriers

JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza Brakes & Suspension brake caliper carriers

Mr-cth
Junior Member

13-10-2020, 11:33 PM

Hi all, havin abit of trouble with the brake caliper carrier on me is200, went to change pads at weekend and one of the sliding pins has siezed solid cudnt even move it with the help of a lump hammer!!.

So anyway looks lik it needs replacing I was just wondering if it will be the same as the gs300 and any other lexus models just to make it abit easier to find??

Any help much appreciated!

Mr-cth

13-10-2020, 11:33 PM #1

sprinter2012
Posting Freak

2,484

14-10-2020, 01:47 AM

I've got a pair of used front caliper carriers from when I fitted my FIGS upgrade carriers...

This pic isn't mine, but just to double check, it's a pair of these you're after?

[Image: %24T2eC16ZHJHQE9nzEy8tsBRPI8nRJOg~~60_35.JPG]

[Image: %24T2eC16ZHJHQE9nzEy8tsBRPI8nRJOg~~60_35.JPG]

sprinter2012

14-10-2020, 01:47 AM #2

Mr-cth
Junior Member

14-10-2020, 02:06 AM

That is exactly what I'm after just the passenger side tho, where are u based? Do you know would they be the same as the gs carriers?

Mr-cth

14-10-2020, 02:06 AM #3

That is exactly what I'm after just the passenger side tho, where are u based? Do you know would they be the same as the gs carriers?

sprinter2012
Posting Freak

2,484

14-10-2020, 02:33 AM

To be honest I'm not sure, but it's possible they might be...

I'm near Oxford, could probably post 1 or both fairly cheap if required.

Sent from my LT26i using Tapatalk

sprinter2012

14-10-2020, 02:33 AM #4

To be honest I'm not sure, but it's possible they might be...

I'm near Oxford, could probably post 1 or both fairly cheap if required.

Sent from my LT26i using Tapatalk

Lexuspat
Administrator

6,827

14-10-2020, 03:50 AM

Had a simialar issue solution was heat, AJ and a hammer finally got the one out that was stuck and then greased it really well working it in the gap

Sent from my GT-I9505 using Tapatalk

[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

[SIZE="2"]Click to visit my Project Thread or my Flickr Account[/SIZE]

OutlawJapClub Admin Team

Lexuspat

14-10-2020, 03:50 AM #5

Had a simialar issue solution was heat, AJ and a hammer finally got the one out that was stuck and then greased it really well working it in the gap

Sent from my GT-I9505 using Tapatalk

[SIZE="2"]Click to visit my Project Thread or my Flickr Account[/SIZE]

OutlawJapClub Admin Team

Mr-cth
Junior Member

14-10-2020, 07:56 AM

aye I tried beating it with a hammer and also managed to snap my spanner off trying to twist it so think get another sorted would be the plan, that would be great sprinter do you know how much it would cost to send it to London?

Mr-cth

14-10-2020, 07:56 AM #6

sprinter2012
Posting Freak

2,484

14-10-2020, 08:15 AM

I'll bring one into work tomorrow and weigh it so I can give you a price.

Sent from my LT26i using Tapatalk

sprinter2012

14-10-2020, 08:15 AM #7

I'll bring one into work tomorrow and weigh it so I can give you a price.

Sent from my LT26i using Tapatalk

sprinter2012
Posting Freak

2,484

16-10-2020, 05:35 AM

Totally forgot to bring one in today, but I just had a quick look on Royal Mail and I'm sure it will fit into their 'Small Parcel' category, so I can post 1 for £6.85. Two together would take it over the 2kg limit, so I'd send it another way if you wanted a pair.