TTE SC pipework size???
TTE SC pipework size???
Marsdendean Moley - are you really sure that 59mm-63mm clamps will fit 60mm hoses
Em yes :Fish:
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Marsdendean Moley - are you really sure that 59mm-63mm clamps will fit 60mm hoses
Em yes :Fish:
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
the bypass pipe is 38mm and the main pipework is 50mm!!! NOT 50mm and 60mm as listed.
so now i have to order another set of tubing......great! i may as well stick the incorrect size tubes up my **** for all the good its going to do me. rant over.
unless my SC is different from everyone elses the pipework sizes in the listing are incorrect!!
the bypass pipe is 38mm and the main pipework is 50mm!!! NOT 50mm and 60mm as listed.
so now i have to order another set of tubing......great! i may as well stick the incorrect size tubes up my **** for all the good its going to do me. rant over.
hope you get the correct parts and im sure no one meant to deceive you
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
27-11-2016, 09:40 AM #23gutted mate,
hope you get the correct parts and im sure no one meant to deceive you
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
27-11-2016, 09:58 AM #25Sorry to hear that Rob. Have you got one of the very early charger kits ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
ill just have to order another set of tubing i guess. wont be worth sending the tubes back as im in CH now and the post will be more than the tubes.
so can someone now please measure the pipework:confused:
its a mid age kit but it looks no different to any other kit i have ever seen.
ill just have to order another set of tubing i guess. wont be worth sending the tubes back as im in CH now and the post will be more than the tubes.
so can someone now please measure the pipework:confused:
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
I'll measure mine tomorrow if you want. Do you want the pipes measured or the hoses ??
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
the wall thickness of the silicone tubing is about 5mm so i guess the size of the silicone tubing was measured and not the pipework and then that would make sense with regard to the sizes listed.
It would also make sense why dimis used reducers and why mole said the 60mm clamps fit.
50mm pipework 5mm silicone wall =60mm overall thickness.
**** good thing i didnt buy clamps as well isnt it!
so know anyone that needs 60mm(inside) tubing???
moley: nah no need mate from my side but might be of some use to someone else in the future to confirm that the kits didnt have a pipework size change at some point.
i guess i know what happened....
the wall thickness of the silicone tubing is about 5mm so i guess the size of the silicone tubing was measured and not the pipework and then that would make sense with regard to the sizes listed.
It would also make sense why dimis used reducers and why mole said the 60mm clamps fit.
50mm pipework 5mm silicone wall =60mm overall thickness.
**** good thing i didnt buy clamps as well isnt it!
so know anyone that needs 60mm(inside) tubing???
moley: nah no need mate from my side but might be of some use to someone else in the future to confirm that the kits didnt have a pipework size change at some point.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
29-11-2016, 12:04 AM #29Straight bits of silicone hose aren't that expensive. But when you start looking at reducers, bends, or custom-shaped bits, it gets a lot more expensive.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
1 Guest(s)
1 Guest(s)
Views 1,782
Last Post by
Views 271
Last Post by