My New IS V8 Build
My New IS V8 Build
well got back to today at 7 in the morning took a lot of brakes on the way back. Right so far the car sounds amazing and has few problems to sort out.
so phoned up Thor racing today for the adaption kit for the R154 gearbox to the 1UZFE and they said they have them in stock just the transmission bracket will be made end of February so i am going to order the gearbox on Monday so i get everything soon and the bracket will come later.
went down to the my cousin's garage called cruise motor sport. they have done a few conversions so far. they will be working on the car from now. the plans so far are to get the engine out the car because the manifold gaskets need to be changed and there is not enough clearance to get the manifold off and once the engine is out it would be easier to get the gearbox hooked up to it. the mechanic is also going to look over everything that has been done to the car so as far as i know everything is perfect. while the engine is out the battery is getting moved in the boot so its a side but at the moment the battery is sitting in the passenger side. then the ECU will go on and remapped once everything is mechanically working and fine thats when i am going to start working on the body work.
will keep everyone updated about everything .
have not got any pics just yet but will take some soon and post them up so people could see the car now.
[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]
As most of you know that i have bought Marcus's V8 is200.
well got back to today at 7 in the morning took a lot of brakes on the way back. Right so far the car sounds amazing and has few problems to sort out.
so phoned up Thor racing today for the adaption kit for the R154 gearbox to the 1UZFE and they said they have them in stock just the transmission bracket will be made end of February so i am going to order the gearbox on Monday so i get everything soon and the bracket will come later.
went down to the my cousin's garage called cruise motor sport. they have done a few conversions so far. they will be working on the car from now. the plans so far are to get the engine out the car because the manifold gaskets need to be changed and there is not enough clearance to get the manifold off and once the engine is out it would be easier to get the gearbox hooked up to it. the mechanic is also going to look over everything that has been done to the car so as far as i know everything is perfect. while the engine is out the battery is getting moved in the boot so its a side but at the moment the battery is sitting in the passenger side. then the ECU will go on and remapped once everything is mechanically working and fine thats when i am going to start working on the body work.
will keep everyone updated about everything .
have not got any pics just yet but will take some soon and post them up so people could see the car now.
[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]
JDM black headlights, rear fog light conversion, JDM size number plates, JDM rear number plate garnish, JDM dash tray, wind deflectors, TRD body kit, white TRD gearknob, TTE lowering springs, TTE ARB's, K&N air filter, stainless steel A/C rings, stainless clock cover, radiator cooling panel, LED side light bulbs, blue reversing bulbs, fan washer jets, clear side repeaters, PIAA silicone wipers, Alpine IDA-X200 headunit, 17 x 8 et40 OZ Ultraleggera with 225/45/17 Toyo Proxes T-1R
Nice one Asi. All the best with the project :thumbup1:
JDM black headlights, rear fog light conversion, JDM size number plates, JDM rear number plate garnish, JDM dash tray, wind deflectors, TRD body kit, white TRD gearknob, TTE lowering springs, TTE ARB's, K&N air filter, stainless steel A/C rings, stainless clock cover, radiator cooling panel, LED side light bulbs, blue reversing bulbs, fan washer jets, clear side repeaters, PIAA silicone wipers, Alpine IDA-X200 headunit, 17 x 8 et40 OZ Ultraleggera with 225/45/17 Toyo Proxes T-1R
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
17-12-2016, 11:54 PM #5Sounds good Asi. Up to you, but why don't you post up a list of all the things you're planning to do to it ? Would be good to start that off again here, so people can follow the progress in this thread without referring back to the other one too ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
Asi As most of you know that i have bought Marcus's V8 is200.
well got back to today at 7 in the morning took a lot of brakes on the way back. Right so far the car sounds amazing and has few problems to sort out.
so phoned up Thor racing today for the adaption kit for the R154 gearbox to the 1UZFE and they said they have them in stock just the transmission bracket will be made end of February so i am going to order the gearbox on Monday so i get everything soon and the bracket will come later.
went down to the my cousin's garage called cruise motor sport. they have done a few conversions so far. they will be working on the car from now. the plans so far are to get the engine out the car because the manifold gaskets need to be changed and there is not enough clearance to get the manifold off and once the engine is out it would be easier to get the gearbox hooked up to it. the mechanic is also going to look over everything that has been done to the car so as far as i know everything is perfect. while the engine is out the battery is getting moved in the boot so its a side but at the moment the battery is sitting in the passenger side. then the ECU will go on and remapped once everything is mechanically working and fine thats when i am going to start working on the body work.
will keep everyone updated about everything .
have not got any pics just yet but will take some soon and post them up so people could see the car now.
looks like you have big things for this car mate, all i ask is you keep in mind that im not a "mechanic" (i just a guy thats willing to have a go) when your cousin starts to look over the car, i have done all the work to the best i know how, i will hold my hands up there are 1 or 2 things that could have been done better, but lets face it you got "home", so i must of done a good job
DJ Wozza Should change your signature to "Winner Best Modified OJC JAE 2009" :laugh:
Did Marcus give you the trophy ?? :w00t:
:tongue_smilie::p thats my trophy hands off lol
[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:
Marcus_1UZ
18-12-2016, 01:35 AM #6Asi As most of you know that i have bought Marcus's V8 is200.
well got back to today at 7 in the morning took a lot of brakes on the way back. Right so far the car sounds amazing and has few problems to sort out.
so phoned up Thor racing today for the adaption kit for the R154 gearbox to the 1UZFE and they said they have them in stock just the transmission bracket will be made end of February so i am going to order the gearbox on Monday so i get everything soon and the bracket will come later.
went down to the my cousin's garage called cruise motor sport. they have done a few conversions so far. they will be working on the car from now. the plans so far are to get the engine out the car because the manifold gaskets need to be changed and there is not enough clearance to get the manifold off and once the engine is out it would be easier to get the gearbox hooked up to it. the mechanic is also going to look over everything that has been done to the car so as far as i know everything is perfect. while the engine is out the battery is getting moved in the boot so its a side but at the moment the battery is sitting in the passenger side. then the ECU will go on and remapped once everything is mechanically working and fine thats when i am going to start working on the body work.
will keep everyone updated about everything .
have not got any pics just yet but will take some soon and post them up so people could see the car now.
looks like you have big things for this car mate, all i ask is you keep in mind that im not a "mechanic" (i just a guy thats willing to have a go) when your cousin starts to look over the car, i have done all the work to the best i know how, i will hold my hands up there are 1 or 2 things that could have been done better, but lets face it you got "home", so i must of done a good job
DJ Wozza Should change your signature to "Winner Best Modified OJC JAE 2009" :laugh:
Did Marcus give you the trophy ?? :w00t:
:tongue_smilie::p thats my trophy hands off lol
[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:
Good luck with the build Asi, this should be quite an interesting project!
2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]
You're not a mechanic? Blimey, how on earth did you do all that by yourself, that's mighty impressive!
Good luck with the build Asi, this should be quite an interesting project!
2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]
Looking forward to see this monster progress Asi, roll on the tuning and fun :thumbup1:
russelllinn
18-12-2016, 02:56 AM #8Marcus I am sure everyone will agree you have done a pretty fine job on the conversion and it should not be knocked by anyone especially as you're not a mechanic, maybe you should be :tongue_smilie:
Looking forward to see this monster progress Asi, roll on the tuning and fun :thumbup1:
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
18-12-2016, 03:03 AM #9All the best with this project. Yea remember Marcus is not a mechanic, I think what he has accomplished so far is kinda amazing!!
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
so far the list is as follows
engine out and looked at
manual gear box
relocate the battery
leather interior going in as the battery is going in to the boot so the interior going to be out
Power FC going in
injectors
remapped
then painted
[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]
Marcus even my cousin says the person who has done must be a very good mechanic because its done very well and he goes its nothing major that is needing done just small things and there is room for a lot of improvement.
so far the list is as follows
engine out and looked at
manual gear box
relocate the battery
leather interior going in as the battery is going in to the boot so the interior going to be out
Power FC going in
injectors
remapped
then painted
[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]
4 Guest(s)
4 Guest(s)
Views 862
Last Post by
Views 1,446
Last Post by
Views 5,895
Last Post by
Views 3,071
Last Post by
Views 1,916
Last Post by
Views 6,345
Last Post by
Views 686
Last Post by
Views 848
Last Post by
Views 1,338
Last Post by