front fog alignment - settings?
front fog alignment - settings?
Had the MFK Motorfahrzeugkontrolle (swiss MOT) today and the lovely person:mad: failed me on the LH front fog light alignment, he said it was pointing into the sky but when i look at the beam against a wall LH and RH are the same height.
I had a look in the workshop manual but it only shows the adjustment. I didnt see him use a beam aligner on the fogs only the headlights.
Does anyone know the height/distance the beam should point?
Ormi - any ideas?
Hi,
Had the MFK Motorfahrzeugkontrolle (swiss MOT) today and the lovely person:mad: failed me on the LH front fog light alignment, he said it was pointing into the sky but when i look at the beam against a wall LH and RH are the same height.
I had a look in the workshop manual but it only shows the adjustment. I didnt see him use a beam aligner on the fogs only the headlights.
Does anyone know the height/distance the beam should point?
Ormi - any ideas?
I also had a look and cant find anything about foglight alignment.
noope all standard, they didnt coomplain when i imported the car and nothing has changed, i reckon the bloke was being a knobber as im a foreigner.... not unusual for swiss people! yes the lex garage will do it but they will charge about £100 for the pleasure. Ill pop to a local garage where i had the emissions test and slip him for cash to stamp off the sheet i think!.
I also had a look and cant find anything about foglight alignment.
I don't remember seeing anything about foglight adjustment in the manual either (where they need to point to, I mean).
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
22-12-2016, 10:16 AM #6Silly question, but do the fog lights have to be working as part of the Swiss "MoT" ? Don't think they're tested here. Could you just not point them both right down as part of the adjustment ?
I don't remember seeing anything about foglight adjustment in the manual either (where they need to point to, I mean).
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
Rabster i didnt think you could adjust the fogs but i may be wrong lol
You can, they adjust for vertical alignment.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
22-12-2016, 10:19 AM #8Rabster i didnt think you could adjust the fogs but i may be wrong lol
You can, they adjust for vertical alignment.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
Dip beam[SIZE="5"][COLOR="Red"] cut off> \____ \____
Fogs here >>> ____ ____[/COLOR][/SIZE]
Like this Dodgy pic approx 4" below :laugh:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
When i worked at the Toyota factory and the BMW mini factory, we used to set the fog lights up at around 4" below the dip beam cut off line ? (if that makes sense?)
Dip beam[SIZE="5"][COLOR="Red"] cut off> \____ \____
Fogs here >>> ____ ____[/COLOR][/SIZE]
Like this Dodgy pic approx 4" below :laugh:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
1 Guest(s)
1 Guest(s)
Views 177
Last Post by
Views 310
Last Post by
Views 542
Last Post by
Views 764
Last Post by
Views 337
Last Post by