widnes_is200's headrest screen walkthrough
widnes_is200's headrest screen walkthrough
step 1 , mark out were u would like ure screen too go with a pencil, it is important too leave about half inch all the way round as this has to be a tight fit,
![[Image: Image024.jpg]](http://i991.photobucket.com/albums/af31/widnes_is200/headrest/Image024.jpg)
step 2, cut the headrest from corner too corner like a cross and by folding the leather back , this gives u the area that u need too be cutting the foam
![[Image: Image025.jpg]](http://i991.photobucket.com/albums/af31/widnes_is200/headrest/Image025.jpg)
step 3, tape ure leather edges back out of the way, this gives u ure shape and makes acess easyer,
![[Image: Image026.jpg]](http://i991.photobucket.com/albums/af31/widnes_is200/headrest/Image026.jpg)
step 4, cut away ure foam with patience, a little at a time untill u get the depth of ure back bracket, remember u can always take away but cant put back!
![[Image: Image027.jpg]](http://i991.photobucket.com/albums/af31/widnes_is200/headrest/Image027.jpg)
step 5, when ure happy with ure bracket , (this shoud be a tight fit as uve left half inch all way round) secure with screws provided, if as on the is200 there is very little plateing in the headrest then a adhesive sutch as silicone will do.
![[Image: Image028.jpg]](http://i991.photobucket.com/albums/af31/widnes_is200/headrest/Image028.jpg)
![[Image: Image029.jpg]](http://i991.photobucket.com/albums/af31/widnes_is200/headrest/Image029.jpg)
pop ure screen in and ure wire out of the bottom,
![[Image: Image030.jpg]](http://i991.photobucket.com/albums/af31/widnes_is200/headrest/Image030.jpg)
repeat with the second headrest.
![[Image: Image033.jpg]](http://i991.photobucket.com/albums/af31/widnes_is200/headrest/Image033.jpg)
it rearly is that easy if u just take ure time, it took me about 1 1/2 hours for each 1, when fitted and wired ille post more pics butt this will probably not be till the week end, hope this helps peeps.
widnes_is200
29-12-2016, 01:15 PM #1firsty can i oppologise for the terrible photo quality, it was only when the job was finished that i realised just how bad the lense was on my phone,
step 1 , mark out were u would like ure screen too go with a pencil, it is important too leave about half inch all the way round as this has to be a tight fit,
step 2, cut the headrest from corner too corner like a cross and by folding the leather back , this gives u the area that u need too be cutting the foam
step 3, tape ure leather edges back out of the way, this gives u ure shape and makes acess easyer,
step 4, cut away ure foam with patience, a little at a time untill u get the depth of ure back bracket, remember u can always take away but cant put back!
step 5, when ure happy with ure bracket , (this shoud be a tight fit as uve left half inch all way round) secure with screws provided, if as on the is200 there is very little plateing in the headrest then a adhesive sutch as silicone will do.
pop ure screen in and ure wire out of the bottom,
repeat with the second headrest.
it rearly is that easy if u just take ure time, it took me about 1 1/2 hours for each 1, when fitted and wired ille post more pics butt this will probably not be till the week end, hope this helps peeps.
widnes_is200
29-12-2016, 01:26 PM #3by the way folks, these headrests were 24.99 eatch on ebay he has about 6 left, the supplyor in work charges 70 for the same screen,
[COLOR="Gray"]December 2008: Crashed Lexus IS200 - Cat B Write Off
August 2009: Crashed Vauxhall Astra - Minor Damage DIY Repair
November 2009: Crashed Vauxhall Astra - Scratches To Bumper No Repair Required
February 2010: Other Party Crashed Into Astra - Extensive Damage To Rear -Settled With Third Party's Insurance
Anyone dare To Predict The Future?[/COLOR]
very nice walkthrough, all these walkthroughs will come in use, when i get my hands on an IS200
[COLOR="Gray"]December 2008: Crashed Lexus IS200 - Cat B Write Off
August 2009: Crashed Vauxhall Astra - Minor Damage DIY Repair
November 2009: Crashed Vauxhall Astra - Scratches To Bumper No Repair Required
February 2010: Other Party Crashed Into Astra - Extensive Damage To Rear -Settled With Third Party's Insurance
Anyone dare To Predict The Future?[/COLOR]
how have you run the wire into the seat? ive got mine half made here at home just need to edge them off (as they dont have holders) and their done
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
29-12-2016, 02:00 PM #5shocking pics mate lol
how have you run the wire into the seat? ive got mine half made here at home just need to edge them off (as they dont have holders) and their done
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
widnes_is200
29-12-2016, 02:05 PM #6havent got that far mate, hopefully doing the seat at the weekend, my pics are beyond shocking mate, butt it was to late
So does the IS headrest have any plate in it?
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
blimey cracking pics!!:biggrin:......nice write up......What make & size are the monitors and what is the pic quality like??
So does the IS headrest have any plate in it?
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
SHAHZ blimey cracking pics!!:biggrin:......nice write up......What make & size are the monitors and what is the pic quality like??
So does the IS headrest have any plate in it?
Not really, just a big blob thing in the middle of it,and fairly stiff foam
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
29-12-2016, 02:09 PM #8SHAHZ blimey cracking pics!!:biggrin:......nice write up......What make & size are the monitors and what is the pic quality like??
So does the IS headrest have any plate in it?
Not really, just a big blob thing in the middle of it,and fairly stiff foam
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
SHAHZ blimey cracking pics!!:biggrin:......nice write up......What make & size are the monitors and what is the pic quality like??
So does the IS headrest have any plate in it?
5.6 inch mate , ice make, the headrests have very little plate in them , nothing too screw to anyway, pic quality is unknown yet , butt ive had a good report from anouther firm inwork,
widnes_is200
29-12-2016, 02:11 PM #9SHAHZ blimey cracking pics!!:biggrin:......nice write up......What make & size are the monitors and what is the pic quality like??
So does the IS headrest have any plate in it?
5.6 inch mate , ice make, the headrests have very little plate in them , nothing too screw to anyway, pic quality is unknown yet , butt ive had a good report from anouther firm inwork,
widnes_is200 5.6 inch mate , ice make, the headrests have very little plate in them , nothing too screw to anyway, pic quality is unknown yet , butt ive had a good report from anouther firm inwork,
Cool, let us know what you think of them, going to be doing this soon myself, so will need to get some monitors, was thinking of getting 6.5" screens but yours seem to fit just right
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
widnes_is200 5.6 inch mate , ice make, the headrests have very little plate in them , nothing too screw to anyway, pic quality is unknown yet , butt ive had a good report from anouther firm inwork,
Cool, let us know what you think of them, going to be doing this soon myself, so will need to get some monitors, was thinking of getting 6.5" screens but yours seem to fit just right
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
3 Guest(s)
3 Guest(s)
Views 1,930
Last Post by
Views 1,850
Last Post by