JapCarForum Cars, Cars, Cars! Car Audio/Video/Electronics/Security wiring a rear-view camera

wiring a rear-view camera

wiring a rear-view camera

momo88
Member
54
06-01-2017, 04:28 PM
#1
Just a quick question guys, im looking at wiring my rear view camera in tomorrow now that i have my headrest monitors done thanks to a few people.

I have tested it to make sure it works, it does, good start lol! The way i want it to work is, have it constantly on, so if im driving along(forwards) i can select the video input screen that shows what is seen from the camera.
My dvd player has an option to switch to it whenever i select reverse. Now i want to use this function but my basic understanding tells me that for that to happen i would have to slice into the power to the reverse bulbs. But this would conflict with me wanting the camera to b constantly 'on'.

Any ideas or opinions?!
Mo
momo88
06-01-2017, 04:28 PM #1

Just a quick question guys, im looking at wiring my rear view camera in tomorrow now that i have my headrest monitors done thanks to a few people.

I have tested it to make sure it works, it does, good start lol! The way i want it to work is, have it constantly on, so if im driving along(forwards) i can select the video input screen that shows what is seen from the camera.
My dvd player has an option to switch to it whenever i select reverse. Now i want to use this function but my basic understanding tells me that for that to happen i would have to slice into the power to the reverse bulbs. But this would conflict with me wanting the camera to b constantly 'on'.

Any ideas or opinions?!
Mo

Bandit
Posting Freak
6,464
06-01-2017, 04:43 PM
#2
Are you fitting the camera on the rear of your car mate to have it on all the time? or you can fit it on the front of the car and use a switch to turn it on when you want it on like on the F1 cars? quite good when its at the front and low down as it looks like your doing silly speeds all the time :laugh:

Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!
Bandit
06-01-2017, 04:43 PM #2

Are you fitting the camera on the rear of your car mate to have it on all the time? or you can fit it on the front of the car and use a switch to turn it on when you want it on like on the F1 cars? quite good when its at the front and low down as it looks like your doing silly speeds all the time :laugh:


Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!

momo88
Member
54
06-01-2017, 04:51 PM
#3
see im not sure wether to put it on the front or back. Its not going on my car to aid me with parking as im prety confortable and confident with it as is. Just a kinda, 'yea i fitted it coz i can'
Might end up puting one on the front and one on the rear and having a switch to, well switch between the two lol!

Im thinking ill just connect it to one of the regy plate lights. As my HIDs are constantly on anyway! And just press the button on my dvd player when i want view the camera picture.

Which reminds me, i need to go to the scrappy soon, the lil bulb holder for the regy plate lights has corroded and caused the conection to the bulb to the plug into it to fail! bad times. Lexus want 8 quid for it lol! And the other is going to, so need 2!
momo88
06-01-2017, 04:51 PM #3

see im not sure wether to put it on the front or back. Its not going on my car to aid me with parking as im prety confortable and confident with it as is. Just a kinda, 'yea i fitted it coz i can'
Might end up puting one on the front and one on the rear and having a switch to, well switch between the two lol!

Im thinking ill just connect it to one of the regy plate lights. As my HIDs are constantly on anyway! And just press the button on my dvd player when i want view the camera picture.

Which reminds me, i need to go to the scrappy soon, the lil bulb holder for the regy plate lights has corroded and caused the conection to the bulb to the plug into it to fail! bad times. Lexus want 8 quid for it lol! And the other is going to, so need 2!

jay_russell
Posting Freak
3,005
07-01-2017, 10:06 AM
#4
take it from the number plate bulbs and keep the car lights on auto
jay_russell
07-01-2017, 10:06 AM #4

take it from the number plate bulbs and keep the car lights on auto

momo88
Member
54
07-01-2017, 04:07 PM
#5
think i could ground it on one of the nuts for the regy plate light plinth?
momo88
07-01-2017, 04:07 PM #5

think i could ground it on one of the nuts for the regy plate light plinth?

Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 37
Views 2,211
01-09-2019, 01:15 PM
Last Post by mattlaw
Replies 5
Views 663
12-07-2019, 10:36 PM
Last Post by FirebirdPhil
Replies 3
Views 630
25-04-2019, 11:55 AM
Last Post by el_gencer
Replies 0
Views 453
12-11-2018, 08:55 AM
Last Post by el_bandido
Replies 5
Views 826
18-06-2018, 12:23 PM
Last Post by Rabster
Replies 9
Views 1,360
26-05-2018, 11:14 AM
Last Post by FunkMasterJay
Replies 17
Views 1,052
15-02-2018, 12:18 PM
Last Post by Moley
Replies 18
Views 1,182
19-09-2017, 07:32 AM
Last Post by aaronabbott
Replies 9
Views 787
27-05-2017, 12:49 PM
Last Post by aaronabbott