Aftermarket Headunit - Fitting
Aftermarket Headunit - Fitting
18-01-2017, 05:20 AM
I ran my cables down the passenger side under the door sills and up the side of the rear seat, through the hole near the top of the back seat, And its good practice to run power cables one side and the rca's down the other? helps to keep any interference down from the power cables etc? :thumbup1:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
I used the metal oem ones on mine mate found them a better fit,
I ran my cables down the passenger side under the door sills and up the side of the rear seat, through the hole near the top of the back seat, And its good practice to run power cables one side and the rca's down the other? helps to keep any interference down from the power cables etc? :thumbup1:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
18-01-2017, 06:40 AM
Bandit I used the metal oem ones on mine mate found them a better fit,
I ran my cables down the passenger side under the door sills and up the side of the rear seat, through the hole near the top of the back seat, And its good practice to run power cables one side and the rca's down the other? helps to keep any interference down from the power cables etc? :thumbup1:
That good advice there Bandit
Bandit I used the metal oem ones on mine mate found them a better fit,
I ran my cables down the passenger side under the door sills and up the side of the rear seat, through the hole near the top of the back seat, And its good practice to run power cables one side and the rca's down the other? helps to keep any interference down from the power cables etc? :thumbup1:
That good advice there Bandit
18-01-2017, 08:18 AM
Bandit I used the metal oem ones on mine mate found them a better fit,
I ran my cables down the passenger side under the door sills and up the side of the rear seat, through the hole near the top of the back seat, And its good practice to run power cables one side and the rca's down the other? helps to keep any interference down from the power cables etc? :thumbup1:
Good stuff, was hoping that I would be able to use it as it seems more secure, yeah will run the cables seperatly, done that in the last car, although I can't remember which side I run the AI net cable, think I sent it with the power leads!
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
Bandit I used the metal oem ones on mine mate found them a better fit,
I ran my cables down the passenger side under the door sills and up the side of the rear seat, through the hole near the top of the back seat, And its good practice to run power cables one side and the rca's down the other? helps to keep any interference down from the power cables etc? :thumbup1:
Good stuff, was hoping that I would be able to use it as it seems more secure, yeah will run the cables seperatly, done that in the last car, although I can't remember which side I run the AI net cable, think I sent it with the power leads!
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
18-01-2017, 08:41 AM
Dark Samurai
18-01-2017, 08:41 AM #14We installed a sub in my dad's boot, and ran the power and RCA cables down the passenger side, amd there has been/is no interference.
21-01-2017, 05:01 AM
Edited 04-03-2010, 02:59 PM by SHAHZ.
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
ok got another question, obviously i will want to be able to use the dvd player on the move, what do i need to do with the brake cables from the head unit loom, just earth it?
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
21-01-2017, 06:10 AM
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
21-01-2017, 06:10 AM #16Yes, just connect it to earth. Underneath the gear surround there are some bolts which go into the chassis, which you can use for that purpose.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
21-01-2017, 07:16 AM
steviewevie Yes, just connect it to earth. Underneath the gear surround there are some bolts which go into the chassis, which you can use for that purpose.
Is the same for both brake wires on alpine units?
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
steviewevie Yes, just connect it to earth. Underneath the gear surround there are some bolts which go into the chassis, which you can use for that purpose.
Is the same for both brake wires on alpine units?
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
21-01-2017, 07:20 AM
SHAHZ Is the same for both brake wires on alpine units?
I don't know Alpine units specifically, but what do the instructions say, does it say both wires have to be connected to the brake, to earth ? Normally they're connected to the handbrake circuit, and that's earthed when the handbrake is on, so connecting them to any handy earth will do the trick.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
21-01-2017, 07:20 AM #18SHAHZ Is the same for both brake wires on alpine units?
I don't know Alpine units specifically, but what do the instructions say, does it say both wires have to be connected to the brake, to earth ? Normally they're connected to the handbrake circuit, and that's earthed when the handbrake is on, so connecting them to any handy earth will do the trick.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
21-01-2017, 11:17 PM
::p
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
Ok ignore my last comment I looked last night and there is only 1 wire......my excuse was it was late when I was looking at it and I had dust in my eyes from sanding the facia:Fish:::p
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
cared
Recently Browsing
1 Guest(s)
1 Guest(s)
Recently Browsing
1 Guest(s)
1 Guest(s)
Related Threads…
Replies 88
Views 18,892
Views 18,892
26-01-2020, 06:18 AM
Last Post byiceman
Last Post by
Replies 5
Views 632
Views 632
23-07-2019, 05:42 AM
Last Post byFirebirdPhil
Last Post by
Replies 8
Views 811
Views 811
29-04-2019, 07:48 AM
Last Post byparthiban
Last Post by
Replies 10
Views 1,575
Views 1,575
06-03-2019, 02:11 PM
Last Post byandymunro
Last Post by
Replies 4
Views 746
Views 746
26-12-2018, 07:50 AM
Last Post byel_bandido
Last Post by
Replies 0
Views 366
Views 366
06-11-2018, 01:05 PM
Last Post byyellowbob
Last Post by
Replies 4
Views 540
Views 540
04-05-2018, 12:42 PM
Last Post byRabster
Last Post by