My Toyota MR2 build thread

JapCarForum Cars, Cars, Cars! Project Cars My Toyota MR2 build thread - 1994 GT-S

My Toyota MR2 build thread - 1994 GT-S

Pages (76): Previous 1 … 29 30 31 32 33 … 76 Next

mbland
Junior Member

22-01-2017, 11:11 AM

#301

the uk plate does fit quite nicely in that location i used to run mine either there or just cable tied it into the mesh for going to and from shows and stuff

mbland

22-01-2017, 11:11 AM #301

the uk plate does fit quite nicely in that location i used to run mine either there or just cable tied it into the mesh for going to and from shows and stuff

russelllinn
Posting Freak

1,034

22-01-2017, 11:20 AM

#302

UK plate looks best there and least you know you're not gonna get done again too, plate tilter sounds good as well though as it could then be mounted up in the bumper recess?

russelllinn

22-01-2017, 11:20 AM #302

UK plate looks best there and least you know you're not gonna get done again too, plate tilter sounds good as well though as it could then be mounted up in the bumper recess?

toxo
Posting Freak

4,843

22-01-2017, 11:35 AM

#303

The reason I don't wanna use a plate tilter is because I don't wanna get nicked again! I'm doing the Miss Banzai tunnel run next weekend and London will be crawling with police.

I thought about making L shaped brackets to attach the plate in the space in the bumper but I'd rather not get anything else in the way of the rads TBH, the crash bar already covers half the radiators and it's got the chargecooler rad in the way as well...

toxo

22-01-2017, 11:35 AM #303

lexynik
Unregistered

27-01-2017, 12:57 PM

#304

put a little servo on the plate tilter like the mobike boys use to f**k off the cameras,that way it wont tilt unless you want it to

lexynik

27-01-2017, 12:57 PM #304

put a little servo on the plate tilter like the mobike boys use to f**k off the cameras,that way it wont tilt unless you want it to

toxo
Posting Freak

4,843

01-02-2017, 05:27 AM

#305

lexynik put a little servo on the plate tilter like the mobike boys use to f**k off the cameras,that way it wont tilt unless you want it to

See my message above... The whole point of doing this is NOT to get nicked!

toxo

01-02-2017, 05:27 AM #305

lexynik put a little servo on the plate tilter like the mobike boys use to f**k off the cameras,that way it wont tilt unless you want it to

See my message above... The whole point of doing this is NOT to get nicked!

lexynik
Unregistered

01-02-2017, 05:36 AM

#306

toxo See my message above... The whole point of doing this is NOT to get nicked!

yes mate i got that part-thats why i said put a servo on it so its fixed solid in the legal position but can be tilted for shows etc

lexynik

01-02-2017, 05:36 AM #306

toxo See my message above... The whole point of doing this is NOT to get nicked!

yes mate i got that part-thats why i said put a servo on it so its fixed solid in the legal position but can be tilted for shows etc

FirebirdPhil
Posting Freak

7,101

01-02-2017, 05:38 AM

#307

I would just go with what we have, tie-wrapped in place in the mesh, then removed for the shows.

"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"

FirebirdPhil

01-02-2017, 05:38 AM #307

I would just go with what we have, tie-wrapped in place in the mesh, then removed for the shows.

"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"

toxo
Posting Freak

4,843

01-02-2017, 05:50 AM

#308

That would require me to have some mesh Wink

I like the exposed rad look (close as I can get to a dirty big FMIC) and a year and a half on it hasn't had a stone through it yet! I think I am going to go for the last of my 3 photos. Thanks for everyones suggestions Smile

toxo

01-02-2017, 05:50 AM #308

That would require me to have some mesh Wink I like the exposed rad look (close as I can get to a dirty big FMIC) and a year and a half on it hasn't had a stone through it yet! I think I am going to go for the last of my 3 photos. Thanks for everyones suggestions Smile

Dan_Turism0
Posting Freak

2,825

01-02-2017, 05:51 AM

#309

toxo That would require me to have some mesh I like the exposed rad look (close as I can get to a dirty big FMIC) and a year and a half on it hasn't had a stone through it yet!

thats the kiss of death

My Garage
Supra Build Thread

' Nothing feels quick when your other car has a 1000bhp - JamieP

Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.

Dan_Turism0

01-02-2017, 05:51 AM #309

toxo That would require me to have some mesh I like the exposed rad look (close as I can get to a dirty big FMIC) and a year and a half on it hasn't had a stone through it yet!

thats the kiss of death

My Garage
Supra Build Thread

' Nothing feels quick when your other car has a 1000bhp - JamieP

Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.

FirebirdPhil
Posting Freak

7,101

01-02-2017, 05:51 AM

#310

toxo That would require me to have some mesh I like the exposed rad look (close as I can get to a dirty big FMIC) and a year and a half on it hasn't had a stone through it yet!

Ha your ducked now you've tempted fate.

"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"

FirebirdPhil

01-02-2017, 05:51 AM #310

toxo That would require me to have some mesh I like the exposed rad look (close as I can get to a dirty big FMIC) and a year and a half on it hasn't had a stone through it yet!

Ha your ducked now you've tempted fate.

"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"