My Toyota MR2 build thread - 1994 GT-S
My Toyota MR2 build thread - 1994 GT-S
![[Image: IMG_0337.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/IMG_0337.jpg)
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
18-03-2017, 09:38 AM #371John's car being made ready on the dyno :
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
18-03-2017, 12:15 PM #372nevermind mate, as long as its one step back and two forward
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
18-03-2017, 09:38 PM #3733S-GTE's have a habbit of jumping teeth, mine did that - cured with a new OEM one.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
Turns out that all they had to do was adjust the pushrod length on the pedal and now the brakes are amazing again! So um, I dropped the ball on that one a little bit! At least I can flog my old master cylinder now.
I nearly put myself through the windscreen on the way home too! I reckon if my brakes were this good in December 2008 I wouldn't have driven into the back of that Vectra...
Also got them to check the ignition timing with a light and it's fine so I will give the car a good service and see if my problems go away. Then Patrick showed me some of their more interesting project cars and filled me in on a few motorsport projects so we may be in for an interesting year
Went to Rogue Motorsport in Kenilworth today to get my ongoing brake problems resolved. Basically since I 1st removed one of the calipers I can stand on the brake pedal with both feet, lifting myself out of the seat and the car still won't lock up. It's been pressure bled, master cylinder changed, braided hoses fitted etc etc... to no avail.
Turns out that all they had to do was adjust the pushrod length on the pedal and now the brakes are amazing again! So um, I dropped the ball on that one a little bit! At least I can flog my old master cylinder now.
I nearly put myself through the windscreen on the way home too! I reckon if my brakes were this good in December 2008 I wouldn't have driven into the back of that Vectra...
Also got them to check the ignition timing with a light and it's fine so I will give the car a good service and see if my problems go away. Then Patrick showed me some of their more interesting project cars and filled me in on a few motorsport projects so we may be in for an interesting year
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
23-03-2017, 05:07 AM #375Good news that you got the brakes sorted at last. But I guess the search goes on to figure out why your last dyno run was 20bhp down ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
Yeah. It's got a light misfire at idle and I've not changed the ignition components for at least 5000 miles (if not 7000) so they are well due. I also want to test out my ignitor and my TPS as I am not convinced they are quite right either. More things to do this afternoon, as well as painting / fitting my new rear brake carriers and slider bolts and carrying on with redoing my ICE wiring.
)Hope the service sorts out the slight misfire bud.
![[Image: AliceTrack-1.jpg]](http://i557.photobucket.com/albums/ss17/berry622/Subaru/AliceTrack-1.jpg)
russelllinn
23-03-2017, 10:35 AM #377It's all go eh, glad the brakes are good now though it always give you that bit of confidence to go a bit quicker ( or is that a bad thing )
Hope the service sorts out the slight misfire bud.
toxo Not a happy bunny - smashed up my front bumper today! Car's started misfiring on boost as well
Aargh, nooo, what happened ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
28-03-2017, 12:38 PM #380toxo Not a happy bunny - smashed up my front bumper today! Car's started misfiring on boost as well
Aargh, nooo, what happened ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
4 Guest(s)
4 Guest(s)
Views 873
Last Post by
Views 1,458
Last Post by
Views 5,923
Last Post by
Views 3,084
Last Post by
Views 1,921
Last Post by
Views 6,360
Last Post by
Views 689
Last Post by
Views 855
Last Post by