Unusual wheel protrusion
Unusual wheel protrusion
23-03-2017, 02:48 AM
My N/S front wheel and tyre appear to stick out further than the O/S wheel and tyre.
The wheels are the exact same as are the tyres. No spacers fitted and the dimensions are identical.
The rear wheels and tyres are identical in that they have the same profile on each side.
These pics were taken from roughly the same angle and height to give you an idea of what I mean.
It is even more noticeable when you look down the side of the car from a head on view.
![[Image: mr67ue.jpg]](http://i44.tinypic.com/mr67ue.jpg)
![[Image: es3vvm.jpg]](http://i42.tinypic.com/es3vvm.jpg)
The steering and suspension appear to be fine, there are no knocks,rattles or shakes when driving.
Anyone have an idea why the N/S appears to be sticking out further?[/SIZE]
[SIZE="4"]Has anyone seem this before on their car?
My N/S front wheel and tyre appear to stick out further than the O/S wheel and tyre.
The wheels are the exact same as are the tyres. No spacers fitted and the dimensions are identical.
The rear wheels and tyres are identical in that they have the same profile on each side.
These pics were taken from roughly the same angle and height to give you an idea of what I mean.
It is even more noticeable when you look down the side of the car from a head on view.
The steering and suspension appear to be fine, there are no knocks,rattles or shakes when driving.
Anyone have an idea why the N/S appears to be sticking out further?[/SIZE]
23-03-2017, 03:02 AM
reganlives
23-03-2017, 03:02 AM #2has the car been involved in any accidents? theres a possibility that the chassis may be a bit "bent" but I wouldnt think too deeply into that thought. Get the geo checked on the car and u'll be able to work out more from there.
23-03-2017, 03:10 AM
As above has the left front corner been involved in a crash where maybe suspension parts may not have been fitted correctly, or possibly something is bent?
Although if you've had the geo checked recently that probably would have highlighted any physical damage.
2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]
That does look quite weird, so it's just the front, the rears are fine?
As above has the left front corner been involved in a crash where maybe suspension parts may not have been fitted correctly, or possibly something is bent?
Although if you've had the geo checked recently that probably would have highlighted any physical damage.
2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]
![[Image: er0sd2.jpg]](http://i42.tinypic.com/er0sd2.jpg)
![[Image: mcxj42.jpg]](http://i41.tinypic.com/mcxj42.jpg)
23-03-2017, 11:17 AM
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
mate your car is fine.....if you take a close look at the bumper its the bumper thats at fault the tte front bumper wasn't the best fit/made the best.if you look under the bumper you will see a metal bar that goes from the under tray/arch liner to the bottom of the bumper(at the wheel arch) loosen it a wee bit pull the bumper out slightly and tighten it back up that should sort you out matey....ps mine was the same......
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
23-03-2017, 02:04 PM
ormi mate your car is fine.....if you take a close look at the bumper its the bumper thats at fault the tte front bumper wasn't the best fit/made the best.if you look under the bumper you will see a metal bar that goes from the under tray/arch liner to the bottom of the bumper(at the wheel arch) loosen it a wee bit pull the bumper out slightly and tighten it back up that should sort you out matey....ps mine was the same......
Cheers Ormi.
I'll have a wee look at it in the morning and sort it out.
Thanks again.
ormi mate your car is fine.....if you take a close look at the bumper its the bumper thats at fault the tte front bumper wasn't the best fit/made the best.if you look under the bumper you will see a metal bar that goes from the under tray/arch liner to the bottom of the bumper(at the wheel arch) loosen it a wee bit pull the bumper out slightly and tighten it back up that should sort you out matey....ps mine was the same......
Cheers Ormi.
I'll have a wee look at it in the morning and sort it out.
Thanks again.
23-03-2017, 02:20 PM
ormi mate your car is fine.....if you take a close look at the bumper its the bumper thats at fault the tte front bumper wasn't the best fit/made the best.if you look under the bumper you will see a metal bar that goes from the under tray/arch liner to the bottom of the bumper(at the wheel arch) loosen it a wee bit pull the bumper out slightly and tighten it back up that should sort you out matey....ps mine was the same......
Are you sure? I know the angles of the two photos are different, but still if you ignore the bumper and look just at the wing, on the right you can still see the tyre next to the wing whereas on the left the tyre is well hidden and tucked in behind the wing. It's the same if you look at the line of the wheel with the door mirror...........hope it's just the photo though and just an illusion with the bumper as ormi says
@bash: Can you do a full head on front photo from a few feet back (if this problem is still visible like that)?
2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]
ormi mate your car is fine.....if you take a close look at the bumper its the bumper thats at fault the tte front bumper wasn't the best fit/made the best.if you look under the bumper you will see a metal bar that goes from the under tray/arch liner to the bottom of the bumper(at the wheel arch) loosen it a wee bit pull the bumper out slightly and tighten it back up that should sort you out matey....ps mine was the same......
Are you sure? I know the angles of the two photos are different, but still if you ignore the bumper and look just at the wing, on the right you can still see the tyre next to the wing whereas on the left the tyre is well hidden and tucked in behind the wing. It's the same if you look at the line of the wheel with the door mirror...........hope it's just the photo though and just an illusion with the bumper as ormi says
@bash: Can you do a full head on front photo from a few feet back (if this problem is still visible like that)?
2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]
23-03-2017, 02:51 PM
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
you will never be able to match the angle you take a pic from side to side so i just think he's a tiny bit further round/closer thats whats making it look like the wing is out or poss could be that some one has leaned against the wing at some point hold the arch close to were the bumper meets the arch and give it a light pull stand back and look do again if needed it wont take much job done its called a minor adjustment of the pannel lol.
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
Recently Browsing
2 Guest(s)
2 Guest(s)
Recently Browsing
2 Guest(s)
2 Guest(s)
Related Threads…
Replies 3
Views 180
Views 180
28-08-2020, 07:39 AM
Last Post byel_bandido
Last Post by
Replies 11
Views 366
Views 366
01-02-2020, 08:22 AM
Last Post bytoxo
Last Post by
Replies 0
Views 251
Views 251
07-09-2019, 11:47 AM
Last Post byChris0121
Last Post by
Replies 7
Views 397
Views 397
25-08-2019, 09:08 AM
Last Post byMatt_C
Last Post by
Replies 6
Views 483
Views 483
03-08-2019, 02:07 AM
Last Post byMatt_C
Last Post by
Replies 6
Views 440
Views 440
07-02-2019, 01:47 AM
Last Post byjasons
Last Post by