Clear door marker covers.
Clear door marker covers.
![[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]](http://i1227.photobucket.com/albums/ee440/davis5835/Mobile%20Uploads/FB_IMG_1474048273787_zpsnbfq6a3s.jpg)
if you take your one out you will see it is deeper at the base then at the top the ones you would replace it with are the same size at the bottom and the top so the sit further back in the door card
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
15-04-2017, 09:44 AM #12The OEM ones are red though, and I think what they're after here is clear ones. Andy, are the ones you're talking about specially made-up ones ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
![[Image: MySig.jpg]](http://i942.photobucket.com/albums/ad263/Lazyboyo/MySig.jpg)
MODS- Geomtry Done(WIM Settings) -Arm Rest -TRD Front skirt -18"Sport Alloy's(Thanks Widnes is200)- Lowered 40mm -Sports Grille(repositoned horns)- Hid's 6000k Dipped -Xenon 6500k Main- LED Tower Sidelights -LED boot light -36 LED Dome Light- Polished Stainless Gearknob- Chrome Tail Pipe -Stainless A/C Rings & Clock Panel - JDM dash tray -Clear Door Lenses with Blue LED's- 6" Altezza Aerial- TOM's Ram II Air Filter- Fog/Brake Conversion -Fan Washer Jets- Stainless Dials.
Iv'e got the ES300 ones, not a perfect fit but nicer than the red ones IMO.
MODS- Geomtry Done(WIM Settings) -Arm Rest -TRD Front skirt -18"Sport Alloy's(Thanks Widnes is200)- Lowered 40mm -Sports Grille(repositoned horns)- Hid's 6000k Dipped -Xenon 6500k Main- LED Tower Sidelights -LED boot light -36 LED Dome Light- Polished Stainless Gearknob- Chrome Tail Pipe -Stainless A/C Rings & Clock Panel - JDM dash tray -Clear Door Lenses with Blue LED's- 6" Altezza Aerial- TOM's Ram II Air Filter- Fog/Brake Conversion -Fan Washer Jets- Stainless Dials.
40mm Lowering Springs, Re-sprayed Front, 6000K HID's, Re-furbed alloys, Bandit Induction Kit (cheers Chris), Raised boot spoiler with LED, Blue calipers with silver decals, De-badged rear, Chrome Oil Filler Cap (thanks to Chris again), White LED dash bulbs, Blue a/c control bulbs, Blue door markers and interior lights, Sony head unit, Chrome Lexus tax disc holder, TRD side skirts, Original Saloon Front Bumper re-fitted instead of Sportcross
![[Image: Lf9Nl.jpg]](http://i.imgur.com/Lf9Nl.jpg)
I got mine off a fellow member, they fit the same as the red ones as far as I can tell maybe they came from the US originally will have to have a look tomorrow and compare them with the red ones but if they are the ES ones then there is hardly any difference, just always thought they where for an IS as there a good fit.
40mm Lowering Springs, Re-sprayed Front, 6000K HID's, Re-furbed alloys, Bandit Induction Kit (cheers Chris), Raised boot spoiler with LED, Blue calipers with silver decals, De-badged rear, Chrome Oil Filler Cap (thanks to Chris again), White LED dash bulbs, Blue a/c control bulbs, Blue door markers and interior lights, Sony head unit, Chrome Lexus tax disc holder, TRD side skirts, Original Saloon Front Bumper re-fitted instead of Sportcross
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
I used interior light lenses mate, cut them to the same shape as the red ones then added clips to the back of them so they sat flush with the door trim, looked pretty good with the Ultra Violet led's i fitted :thumbup1:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
7 Guest(s)
7 Guest(s)
Views 491
Last Post by
Views 713
Last Post by
Views 409
Last Post by
Views 990
Last Post by
Views 372
Last Post by