Toyota Supra

JapCarForum Club Sponsor Invisible Touch Detailing Toyota Supra

Toyota Supra

Pages (2): 1 2 Next

Invisible Touch Detailing
Senior Member

423

02-06-2017, 05:34 AM

It had already been washed a couple of days before i arrived and kept under cover, so after a wipe down with last touch, i checked the paint under sunlight and led light

[Image: P1050706.jpg]

It was then clayed, with not to much contamination

[Image: P1050718.jpg]

The wheels were sprayed with bilberry and aggitated with brushes

[Image: P1050721.jpg]

Invisible Touch Detailing

02-06-2017, 05:34 AM #1

Hi,

I was asked to prepare this Supra belonging to a fellow club member, for our club day at SantaPod coming soon. I last detailed this car on valentines day last year and since then it has undergone lots more changes and been part of several special events and magazine shoots.

Today was an extremely hot day working outside under a gazebo and with one day to work with meant i could not get lots of photos as i really needed to crack on. There were lots of other bits i would have loved to do but the primary objective was the paintwork.

This was the car on arrival. The drag rear wheels fitted, especially for SantaPod, with street legal tyres. With not far off 1000bhp, this car and the owner, are not messing about Smile

[Image: P1050705.jpg]

[Image: P1050720.jpg]

[Image: P1050719.jpg]

It had already been washed a couple of days before i arrived and kept under cover, so after a wipe down with last touch, i checked the paint under sunlight and led light

[Image: P1050706.jpg]

[Image: P1050707.jpg]

[Image: P1050708.jpg]

[Image: P1050709.jpg]

[Image: P1050710.jpg]

[Image: P1050711.jpg]

[Image: P1050712.jpg]

[Image: P1050713.jpg]

[Image: P1050714.jpg]

[Image: P1050715.jpg]

[Image: P1050716.jpg]

[Image: P1050717.jpg]

It was then clayed, with not to much contamination

[Image: P1050718.jpg]

The wheels were sprayed with bilberry and aggitated with brushes

[Image: P1050721.jpg]

Invisible Touch Detailing
Senior Member

423

02-06-2017, 05:35 AM

I took some paint thickness readings, some panels of the car had been resprayed just before doing the car last year

[Image: P1050722.jpg]

Most of the car was taped up ready for machining and the rest done when required

[Image: P1050727.jpg]

I used the makita rotary, menzerna 106fa, 3m polishing pad, 3m small polishing pad, sonus small polishing pad

[Image: P1050730.jpg]

Moving round to the driver door

[Image: P1050739.jpg]

Invisible Touch Detailing

02-06-2017, 05:35 AM #2

I took some paint thickness readings, some panels of the car had been resprayed just before doing the car last year

[Image: P1050722.jpg]

[Image: P1050723.jpg]

[Image: P1050724.jpg]

[Image: P1050725.jpg]

[Image: P1050726.jpg]

Most of the car was taped up ready for machining and the rest done when required

[Image: P1050727.jpg]

[Image: P1050728.jpg]

[Image: P1050729.jpg]

I used the makita rotary, menzerna 106fa, 3m polishing pad, 3m small polishing pad, sonus small polishing pad

[Image: P1050730.jpg]

[Image: P1050731.jpg]

[Image: P1050734.jpg]

[Image: P1050735.jpg]

[Image: P1050736.jpg]

[Image: P1050737.jpg]

Moving round to the driver door

[Image: P1050739.jpg]

[Image: P1050740.jpg]

[Image: P1050741.jpg]

[Image: P1050743.jpg]

Invisible Touch Detailing
Senior Member

423

02-06-2017, 05:35 AM

The bonnet was then quartered

[Image: P1050744.jpg]

The front wing

[Image: P1050751.jpg]

Other front wing

[Image: P1050756.jpg]

Machine polishing complete.

[Image: P1050758.jpg]

The car was dusted down and i applied dodo juice lime prime lite

[Image: P1050762.jpg]

Edited 14-07-2010, 04:28 PM by Rabster.

Invisible Touch Detailing

02-06-2017, 05:35 AM #3

The bonnet was then quartered

[Image: P1050744.jpg]

[Image: P1050745.jpg]

[Image: P1050746.jpg]

[Image: P1050748.jpg]

[Image: P1050750.jpg]

The front wing

[Image: P1050751.jpg]

[Image: P1050752.jpg]

[Image: P1050753.jpg]

[Image: P1050754.jpg]

Other front wing

[Image: P1050756.jpg]

[Image: P1050757.jpg]

Machine polishing complete.

[Image: P1050758.jpg]

[Image: P1050759.jpg]

[Image: P1050760.jpg]

The car was dusted down and i applied dodo juice lime prime lite

[Image: P1050762.jpg]

[Image: P1050763.jpg]

[Image: P1050764.jpg]

[Image: P1050765.jpg]

[Image: P1050766.jpg]

[Image: P1050767.jpg]

Invisible Touch Detailing
Senior Member

423

02-06-2017, 05:35 AM

Sadly these were the last pics i got. The car was completed at 9pm and put under cover. I'm sure the owner will take some pics which i will upload once it comes out to play Smile

Endurance tyre gel was applied along with poorboys wheel sealant. It was finished off with victoria concourse wax. It looked stunning Smile

Hope you enjoyed

Christian

Invisible Touch Detailing

02-06-2017, 05:35 AM #4

[Image: P1050768.jpg]

[Image: P1050769.jpg]

[Image: P1050770.jpg]

[Image: P1050771.jpg]

Sadly these were the last pics i got. The car was completed at 9pm and put under cover. I'm sure the owner will take some pics which i will upload once it comes out to play Smile

Endurance tyre gel was applied along with poorboys wheel sealant. It was finished off with victoria concourse wax. It looked stunning Smile

Hope you enjoyed

Christian

purplewitch
Posting Freak

3,953

02-06-2017, 05:54 AM

Why is everyone torturing me with pictures of Jamie's car ... I want I want I want I want Sad

Jamies car would still be amazing if it was ten inches thick in mud and rubbish lol.. but you have made it look even more amazing than it already is ..... next time you have it, let us know.. me and Dan have a plan lol

[SIGPIC][/SIGPIC] [COLOR="DarkOrchid"]That symbol on the side of my door.. Definition by FirebirdPhil 'Translated it means -
"try to overtake - go on give it a go I dare you......." [/COLOR]
I'm not an Outlaw; I'm a Poutlaw! Purple Supras are the bestest! I love purple .. a lot lot lot Smile

purplewitch

02-06-2017, 05:54 AM #5

Why is everyone torturing me with pictures of Jamie's car ... I want I want I want I want Sad Jamies car would still be amazing if it was ten inches thick in mud and rubbish lol.. but you have made it look even more amazing than it already is ..... next time you have it, let us know.. me and Dan have a plan lol

Invisible Touch Detailing
Senior Member

423

02-06-2017, 06:06 AM

LOL

will get some finished pics over the w'end when some new wheels get test fitted

Is an amasing machine and with his latest power mods really shifts to. Cant wait to see it at pod on the 14th Smile

This was his latest dyno vid from last week. Really needs to go on a hub dyno now, just no grip on the rollers as you can see from the vid (even with those rears fitted!)

YouTube- 900+bhp Supra Trying to climb out of the Dyno! JamieP

Invisible Touch Detailing

02-06-2017, 06:06 AM #6

LOL Smile will get some finished pics over the w'end when some new wheels get test fitted

Is an amasing machine and with his latest power mods really shifts to. Cant wait to see it at pod on the 14th Smile

This was his latest dyno vid from last week. Really needs to go on a hub dyno now, just no grip on the rollers as you can see from the vid (even with those rears fitted!)

YouTube- 900+bhp Supra Trying to climb out of the Dyno! JamieP

is300_dino
Posting Freak

3,556

02-06-2017, 06:11 AM

:drool: lovely job christian that has come up beautiful Smile

is300_dino

02-06-2017, 06:11 AM #7

:drool: lovely job christian that has come up beautiful Smile

DaveEdin
Posting Freak

5,657

02-06-2017, 06:13 AM

Christian's supra looks pretty stunning too, Sam...

:thumbup1: excellent work as usual from Christian, quick question - is there much your paint correction can do for actual scratches (as opposed to swirls for example)? Maybe it depends how deep the scratch is?

DaveEdin

02-06-2017, 06:13 AM #8

Invisible Touch Detailing
Senior Member

423

02-06-2017, 06:24 AM

Cant say i totally agree with the comment on my Supra Dave, but its getting there, lots and lots to do but the interior has made good progress last week Smile

Although sadly now with a mechanic with a possible cracked manifold, but hopefully just a gasket. Got a month for it to be running properly till it goes on the track Smile

Large scratch removal will always depend how deep they are and if the clearcoat has been completely broken.

Invisible Touch Detailing

02-06-2017, 06:24 AM #9

Cant say i totally agree with the comment on my Supra Dave, but its getting there, lots and lots to do but the interior has made good progress last week Smile Although sadly now with a mechanic with a possible cracked manifold, but hopefully just a gasket. Got a month for it to be running properly till it goes on the track Smile

Large scratch removal will always depend how deep they are and if the clearcoat has been completely broken.