My Toyota MR2 build thread - 1994 GT-S
My Toyota MR2 build thread - 1994 GT-S
28-06-2017, 06:26 AM
My Garage
Supra Build Thread
' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
Dan_Turism0
28-06-2017, 06:26 AM #431does the '2 engine bay suffer from high heat due to how compact it is?
My Garage
Supra Build Thread
' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
28-06-2017, 06:26 AM
toxo Have also just bought a phenolic inlet manifold gasket. This acts as a heat insulator between the head and the inlet manifold, preventing heat transfer. This in turn means the inlet manifold and throttlebody should stay cool and not heat up the inlet charge as it travels through.
Heard only good things about them from various forums:thumbup1:
After all this work it will be interesting to see another dyno run. Just to see what a very good service does.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
28-06-2017, 06:26 AM #432toxo Have also just bought a phenolic inlet manifold gasket. This acts as a heat insulator between the head and the inlet manifold, preventing heat transfer. This in turn means the inlet manifold and throttlebody should stay cool and not heat up the inlet charge as it travels through.
Heard only good things about them from various forums:thumbup1:
After all this work it will be interesting to see another dyno run. Just to see what a very good service does.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
28-06-2017, 07:58 AM
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
28-06-2017, 07:58 AM #433Good work Toxo, ive got too much to do before JAE, but i'll do what i can
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
28-06-2017, 12:22 PM
Dan_Turism0 does the '2 engine bay suffer from high heat due to how compact it is?
Yeah and the lack of airflow!! The more work I do on them the more I think they were never designed to have the turbo engine in and it was just plonked in there from the Celica for the hell of it. I've messed about with it from stock a lot as well remember, it has no side fan anymore and it has the chargecooler sat partially over the top of the turbo heat shield which is a bit backwards.
2tongues Heard only good things about them from various forums:thumbup1:
After all this work it will be interesting to see another dyno run. Just to see what a very good service does.
Well there are a lot of them available for Rev1/2 engines as they simply replace the TVIS plate with a big thick Teflon spacer instead. Rev3+ doesn't have that luxury! The only one I've found is a Gizzmo one (yes the EBC people) but they're not rocket science. It's ordered now anyway.
And the main reason I'm doing this is because I did 2 dyno runs a month apart and lost 30bhp! Hopefully once it's done the power should be back up to ~290 like it was before.
Dan_Turism0 does the '2 engine bay suffer from high heat due to how compact it is?
Yeah and the lack of airflow!! The more work I do on them the more I think they were never designed to have the turbo engine in and it was just plonked in there from the Celica for the hell of it. I've messed about with it from stock a lot as well remember, it has no side fan anymore and it has the chargecooler sat partially over the top of the turbo heat shield which is a bit backwards.
2tongues Heard only good things about them from various forums:thumbup1:
After all this work it will be interesting to see another dyno run. Just to see what a very good service does.
Well there are a lot of them available for Rev1/2 engines as they simply replace the TVIS plate with a big thick Teflon spacer instead. Rev3+ doesn't have that luxury! The only one I've found is a Gizzmo one (yes the EBC people) but they're not rocket science. It's ordered now anyway.
And the main reason I'm doing this is because I did 2 dyno runs a month apart and lost 30bhp! Hopefully once it's done the power should be back up to ~290 like it was before.
![[Image: gizzmoGasket.jpg]](http://theshado.ws/images/imoc/gizzmoGasket.jpg)
![[Image: gizzmoGasketCloseUp.jpg]](http://theshado.ws/images/imoc/gizzmoGasketCloseUp.jpg)
12-07-2017, 12:27 PM
All the exhaust path, downpipe, midpipe, manifold and turbo:
![[Image: IMGP1719.JPG]](http://theshado.ws/images/imoc/ct20b/IMGP1719.JPG)
This gasket is mangled, you can see the hole around the bottom left stud, and it's broken at the top about 1/3rd of the way across. You can see the split gasket and black soot around it.
![[Image: IMGP1720.JPG]](http://theshado.ws/images/imoc/ct20b/IMGP1720.JPG)
Took the actuator and the exhaust housing off. The advice I got for separating the 2 parts was using chisels... it took 5!!
![[Image: IMGP1721.JPG]](http://theshado.ws/images/imoc/ct20b/IMGP1721.JPG)
Close up of the ceramic exhaust wheel
![[Image: IMGP1722.JPG]](http://theshado.ws/images/imoc/ct20b/IMGP1722.JPG)
Close up of the exhaust housing
![[Image: IMGP1723.JPG]](http://theshado.ws/images/imoc/ct20b/IMGP1723.JPG)
Big circlip off, compressor housing off
![[Image: IMGP1724.JPG]](http://theshado.ws/images/imoc/ct20b/IMGP1724.JPG)
Split the turbo apart today to find more blown gaskets.
All the exhaust path, downpipe, midpipe, manifold and turbo:
This gasket is mangled, you can see the hole around the bottom left stud, and it's broken at the top about 1/3rd of the way across. You can see the split gasket and black soot around it.
Took the actuator and the exhaust housing off. The advice I got for separating the 2 parts was using chisels... it took 5!!
Close up of the ceramic exhaust wheel
Close up of the exhaust housing
Big circlip off, compressor housing off
23-07-2017, 04:49 AM
Bob found chips in 2 of the compressor blades and some rubbing on the exhaust wheel, so that's new shaft & compressor wheel (they are one piece on these turbos) but the exhaust wheel should balance out. Off to universal turbos for balancing now... and definitely not back for JAE.
23-07-2017, 05:04 AM
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
23-07-2017, 05:04 AM #438Gutted mate.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
I'd like it back in time for the Tunnel Run though!!
23-07-2017, 05:55 AM
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
23-07-2017, 05:55 AM #440Does hat mean you can give me a hand with the Dash and swapping the clocks over next week??
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
Recently Browsing
1 Guest(s)
1 Guest(s)
Recently Browsing
1 Guest(s)
1 Guest(s)
Related Threads…
Replies 19
Views 873
Views 873
31-10-2023, 10:05 PM
Last Post byRCarter
Last Post by
Replies 20
Views 1,458
Views 1,458
08-10-2023, 03:59 AM
Last Post byWayne
Last Post by
Replies 95
Views 5,925
Views 5,925
06-10-2023, 02:58 AM
Last Post byWayne
Last Post by
Replies 42
Views 3,084
Views 3,084
04-10-2023, 03:52 PM
Last Post byWayne
Last Post by
Replies 28
Views 1,921
Views 1,921
17-05-2023, 11:25 AM
Last Post byIS200_rider
Last Post by
Replies 54
Views 6,360
Views 6,360
05-05-2023, 01:09 PM
Last Post bySparkystav
Last Post by
Replies 7
Views 689
Views 689
25-03-2023, 12:20 AM
Last Post byAll Motor
Last Post by
Replies 10
Views 855
Views 855
18-03-2023, 01:09 PM
Last Post byFOSSIL FUELS
Last Post by