JapCarForum Cars, Cars, Cars! Project Cars My New IS V8 Build

My New IS V8 Build

My New IS V8 Build

Pages (58): 1 2 3 4 558 Next  
Asi
Posting Freak
2,510
17-12-2016, 04:30 PM
#1
As most of you know that i have bought Marcus's V8 is200.
well got back to today at 7 in the morning took a lot of brakes on the way back. Right so far the car sounds amazing and has few problems to sort out.

so phoned up Thor racing today for the adaption kit for the R154 gearbox to the 1UZFE and they said they have them in stock just the transmission bracket will be made end of February so i am going to order the gearbox on Monday so i get everything soon and the bracket will come later.

went down to the my cousin's garage called cruise motor sport. they have done a few conversions so far. they will be working on the car from now. the plans so far are to get the engine out the car because the manifold gaskets need to be changed and there is not enough clearance to get the manifold off and once the engine is out it would be easier to get the gearbox hooked up to it. the mechanic is also going to look over everything that has been done to the car so as far as i know everything is perfect. while the engine is out the battery is getting moved in the boot so its a side but at the moment the battery is sitting in the passenger side. then the ECU will go on and remapped once everything is mechanically working and fine thats when i am going to start working on the body work.

will keep everyone updated about everything .
have not got any pics just yet but will take some soon and post them up so people could see the car now.

[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]
Asi
17-12-2016, 04:30 PM #1

As most of you know that i have bought Marcus's V8 is200.
well got back to today at 7 in the morning took a lot of brakes on the way back. Right so far the car sounds amazing and has few problems to sort out.

so phoned up Thor racing today for the adaption kit for the R154 gearbox to the 1UZFE and they said they have them in stock just the transmission bracket will be made end of February so i am going to order the gearbox on Monday so i get everything soon and the bracket will come later.

went down to the my cousin's garage called cruise motor sport. they have done a few conversions so far. they will be working on the car from now. the plans so far are to get the engine out the car because the manifold gaskets need to be changed and there is not enough clearance to get the manifold off and once the engine is out it would be easier to get the gearbox hooked up to it. the mechanic is also going to look over everything that has been done to the car so as far as i know everything is perfect. while the engine is out the battery is getting moved in the boot so its a side but at the moment the battery is sitting in the passenger side. then the ECU will go on and remapped once everything is mechanically working and fine thats when i am going to start working on the body work.

will keep everyone updated about everything .
have not got any pics just yet but will take some soon and post them up so people could see the car now.


[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]

Asi
Posting Freak
2,510
17-12-2016, 04:53 PM
#2
thats done Wozza.
Nope Marcus did not give me :lol: i will leave that with him so he can keep it as memories

[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]
Asi
17-12-2016, 04:53 PM #2

thats done Wozza.
Nope Marcus did not give me :lol: i will leave that with him so he can keep it as memories


[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]

Ally
Senior Member
451
17-12-2016, 10:03 PM
#3
Nice one Asi. All the best with the project :thumbup1:

JDM black headlights, rear fog light conversion, JDM size number plates, JDM rear number plate garnish, JDM dash tray, wind deflectors, TRD body kit, white TRD gearknob, TTE lowering springs, TTE ARB's, K&N air filter, stainless steel A/C rings, stainless clock cover, radiator cooling panel, LED side light bulbs, blue reversing bulbs, fan washer jets, clear side repeaters, PIAA silicone wipers, Alpine IDA-X200 headunit, 17 x 8 et40 OZ Ultraleggera with 225/45/17 Toyo Proxes T-1R
Ally
17-12-2016, 10:03 PM #3

Nice one Asi. All the best with the project :thumbup1:


JDM black headlights, rear fog light conversion, JDM size number plates, JDM rear number plate garnish, JDM dash tray, wind deflectors, TRD body kit, white TRD gearknob, TTE lowering springs, TTE ARB's, K&N air filter, stainless steel A/C rings, stainless clock cover, radiator cooling panel, LED side light bulbs, blue reversing bulbs, fan washer jets, clear side repeaters, PIAA silicone wipers, Alpine IDA-X200 headunit, 17 x 8 et40 OZ Ultraleggera with 225/45/17 Toyo Proxes T-1R

Lexusboy
Posting Freak
9,267
17-12-2016, 10:20 PM
#4
Asi you need to defend the cars Status at this years JAE :tongue_smilie:

You said your busy but we all want to see and hear the car there this year:thumbup1:
Lexusboy
17-12-2016, 10:20 PM #4

Asi you need to defend the cars Status at this years JAE :tongue_smilie:

You said your busy but we all want to see and hear the car there this year:thumbup1:

steviewevie
Posting Freak
7,993
17-12-2016, 11:54 PM
#5
Sounds good Asi. Up to you, but why don't you post up a list of all the things you're planning to do to it ? Would be good to start that off again here, so people can follow the progress in this thread without referring back to the other one too ?

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
17-12-2016, 11:54 PM #5

Sounds good Asi. Up to you, but why don't you post up a list of all the things you're planning to do to it ? Would be good to start that off again here, so people can follow the progress in this thread without referring back to the other one too ?


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

Marcus_1UZ
Senior Member
511
18-12-2016, 01:35 AM
#6
Asi As most of you know that i have bought Marcus's V8 is200.
well got back to today at 7 in the morning took a lot of brakes on the way back. Right so far the car sounds amazing and has few problems to sort out.

so phoned up Thor racing today for the adaption kit for the R154 gearbox to the 1UZFE and they said they have them in stock just the transmission bracket will be made end of February so i am going to order the gearbox on Monday so i get everything soon and the bracket will come later.

went down to the my cousin's garage called cruise motor sport. they have done a few conversions so far. they will be working on the car from now. the plans so far are to get the engine out the car because the manifold gaskets need to be changed and there is not enough clearance to get the manifold off and once the engine is out it would be easier to get the gearbox hooked up to it. the mechanic is also going to look over everything that has been done to the car so as far as i know everything is perfect. while the engine is out the battery is getting moved in the boot so its a side but at the moment the battery is sitting in the passenger side. then the ECU will go on and remapped once everything is mechanically working and fine thats when i am going to start working on the body work.

will keep everyone updated about everything .
have not got any pics just yet but will take some soon and post them up so people could see the car now.

looks like you have big things for this car mate, all i ask is you keep in mind that im not a "mechanic" (i just a guy thats willing to have a go) when your cousin starts to look over the car, i have done all the work to the best i know how, i will hold my hands up there are 1 or 2 things that could have been done better, but lets face it you got "home", so i must of done a good jobWink

DJ Wozza Should change your signature to "Winner Best Modified OJC JAE 2009" :laugh:
Did Marcus give you the trophy ?? :w00t:

:tongue_smilie::p thats my trophy hands off lol

[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:
Marcus_1UZ
18-12-2016, 01:35 AM #6

Asi As most of you know that i have bought Marcus's V8 is200.
well got back to today at 7 in the morning took a lot of brakes on the way back. Right so far the car sounds amazing and has few problems to sort out.

so phoned up Thor racing today for the adaption kit for the R154 gearbox to the 1UZFE and they said they have them in stock just the transmission bracket will be made end of February so i am going to order the gearbox on Monday so i get everything soon and the bracket will come later.

went down to the my cousin's garage called cruise motor sport. they have done a few conversions so far. they will be working on the car from now. the plans so far are to get the engine out the car because the manifold gaskets need to be changed and there is not enough clearance to get the manifold off and once the engine is out it would be easier to get the gearbox hooked up to it. the mechanic is also going to look over everything that has been done to the car so as far as i know everything is perfect. while the engine is out the battery is getting moved in the boot so its a side but at the moment the battery is sitting in the passenger side. then the ECU will go on and remapped once everything is mechanically working and fine thats when i am going to start working on the body work.

will keep everyone updated about everything .
have not got any pics just yet but will take some soon and post them up so people could see the car now.

looks like you have big things for this car mate, all i ask is you keep in mind that im not a "mechanic" (i just a guy thats willing to have a go) when your cousin starts to look over the car, i have done all the work to the best i know how, i will hold my hands up there are 1 or 2 things that could have been done better, but lets face it you got "home", so i must of done a good jobWink

DJ Wozza Should change your signature to "Winner Best Modified OJC JAE 2009" :laugh:
Did Marcus give you the trophy ?? :w00t:

:tongue_smilie::p thats my trophy hands off lol


[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:

parthiban
Posting Freak
4,925
18-12-2016, 02:52 AM
#7
You're not a mechanic? Blimey, how on earth did you do all that by yourself, that's mighty impressive!

Good luck with the build Asi, this should be quite an interesting project!

2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]
parthiban
18-12-2016, 02:52 AM #7

You're not a mechanic? Blimey, how on earth did you do all that by yourself, that's mighty impressive!

Good luck with the build Asi, this should be quite an interesting project!


2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]

russelllinn
Posting Freak
1,034
18-12-2016, 02:56 AM
#8
Marcus I am sure everyone will agree you have done a pretty fine job on the conversion and it should not be knocked by anyone especially as you're not a mechanic, maybe you should be :tongue_smilie:

Looking forward to see this monster progress Asi, roll on the tuning and fun :thumbup1:
russelllinn
18-12-2016, 02:56 AM #8

Marcus I am sure everyone will agree you have done a pretty fine job on the conversion and it should not be knocked by anyone especially as you're not a mechanic, maybe you should be :tongue_smilie:

Looking forward to see this monster progress Asi, roll on the tuning and fun :thumbup1:

FirebirdPhil
Posting Freak
7,101
18-12-2016, 03:03 AM
#9
All the best with this project. Yea remember Marcus is not a mechanic, I think what he has accomplished so far is kinda amazing!!

"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
18-12-2016, 03:03 AM #9

All the best with this project. Yea remember Marcus is not a mechanic, I think what he has accomplished so far is kinda amazing!!


"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"

Asi
Posting Freak
2,510
18-12-2016, 03:33 AM
#10
Marcus even my cousin says the person who has done must be a very good mechanic because its done very well and he goes its nothing major that is needing done just small things and there is room for a lot of improvement.

so far the list is as follows
engine out and looked at
manual gear box
relocate the battery
leather interior going in as the battery is going in to the boot so the interior going to be out
Power FC going in
injectors
remapped
then painted

[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]
Asi
18-12-2016, 03:33 AM #10

Marcus even my cousin says the person who has done must be a very good mechanic because its done very well and he goes its nothing major that is needing done just small things and there is room for a lot of improvement.

so far the list is as follows
engine out and looked at
manual gear box
relocate the battery
leather interior going in as the battery is going in to the boot so the interior going to be out
Power FC going in
injectors
remapped
then painted


[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]

Pages (58): 1 2 3 4 558 Next  
Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 19
Views 890
31-10-2023, 10:05 PM
Last Post by RCarter
Replies 20
Views 1,465
08-10-2023, 03:59 AM
Last Post by Wayne
Replies 95
Views 5,934
06-10-2023, 02:58 AM
Last Post by Wayne
Replies 42
Views 3,096
04-10-2023, 03:52 PM
Last Post by Wayne
Replies 176
Views 21,970
10-09-2023, 07:50 PM
Last Post by Sparkystav
Replies 28
Views 1,926
17-05-2023, 11:25 AM
Last Post by IS200_rider
Replies 54
Views 6,361
05-05-2023, 01:09 PM
Last Post by Sparkystav
Replies 10
Views 857
18-03-2023, 01:09 PM
Last Post by FOSSIL FUELS
Replies 10
Views 1,343
07-02-2023, 08:29 AM
Last Post by dimis