New brakes + fluids
New brakes + fluids
Also going to change gearbox and diff fluid @ the same time so any recomendations on which to go for
already have new discs + shoes + pads
just wondering on fitting kit for for brake pads + shoes
any help thanks....
![[Image: image002-5.jpg]](http://i486.photobucket.com/albums/rr223/P881NGU/image002-5.jpg)
Im thinking of getting a set bradied lines aswell as synthetic brake fluid..any ideas of what grade to get..
Also going to change gearbox and diff fluid @ the same time so any recomendations on which to go for
already have new discs + shoes + pads
just wondering on fitting kit for for brake pads + shoes
any help thanks....
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Dot 5.1 for the brake fluid
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
13-09-2017, 10:58 AM #3Auto or manual gearbox ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
manual gearbox - 1.8L API GL-3 SAE 75W-90
lsd - 1.0L Hypoid gear oil API GL-5 SAE 90
Go for fully synthetic in these. You can actually use the same oil in both (using the higher API GL-5 spec). Something like this stuff. Opie Oils have a big sale on at the moment :wink:
As Moley said, DOT 5.1 is what you want for the brake fluid. Do not use DOT 5, which will not mix with the other types of brake fluid.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
13-09-2017, 09:52 PM #5According to the official spec sheet, you need the following :
manual gearbox - 1.8L API GL-3 SAE 75W-90
lsd - 1.0L Hypoid gear oil API GL-5 SAE 90
Go for fully synthetic in these. You can actually use the same oil in both (using the higher API GL-5 spec). Something like this stuff. Opie Oils have a big sale on at the moment :wink:
As Moley said, DOT 5.1 is what you want for the brake fluid. Do not use DOT 5, which will not mix with the other types of brake fluid.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
As for braided brake lines, not sure. The Goodridge ones are pretty easy to get hold of, you'll find them on eBay. There are different fittings depending on the model year of your car, I think, something that was debated at length on here a while back. Make sure the seller tells you they're the right ones for your car, in writing, so that if there's a problem you can get a refund/swap.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
15-09-2017, 02:31 AM #7I'm not sure how much 5.1 you'll need, but it'll probably take a few litres to flush it all through (until the dirty old stuff starts turning into clear new stuff).
As for braided brake lines, not sure. The Goodridge ones are pretty easy to get hold of, you'll find them on eBay. There are different fittings depending on the model year of your car, I think, something that was debated at length on here a while back. Make sure the seller tells you they're the right ones for your car, in writing, so that if there's a problem you can get a refund/swap.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
46540-28010 and 46550-28010
46540-18010 and 46590-28010
You need all four of those for a set. These are only the shoes, not the springs, shims or anything else. Ormi will be able to better advise on whether you should be changing anything else.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
16-09-2017, 12:52 AM #9Handbrake shoes are as follows :
46540-28010 and 46550-28010
46540-18010 and 46590-28010
You need all four of those for a set. These are only the shoes, not the springs, shims or anything else. Ormi will be able to better advise on whether you should be changing anything else.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
1 Guest(s)
1 Guest(s)
Views 413
Last Post by
Views 583
Last Post by
Views 1,888
Last Post by
Views 1,348
Last Post by
Views 401
Last Post by