JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza Illuminated door handles?

Illuminated door handles?

Illuminated door handles?

Pages (4): Previous 1 2 3 4
jomo
Senior Member
709
12-11-2018, 03:26 PM
#31
sprinter2012 haha, even if you put LEDs on every handle, under every door, in the boot, under the bonnet, you'd never have enough to blow a fuse.

But I'd be wary of using them in too many locations at the risk of turning your car into a christmas tree when you unlock it. :lol:

Last thing i want it my IS to end up on Barryboys!!!

Rab if i find a way to run a feed to the handles ill defo do a write up.

[Image: is200%20catoon.jpg] [Image: 104113415648fa201e2ecb5.gif] [Image: 91-bluescreen.gif]
jomo
12-11-2018, 03:26 PM #31

sprinter2012 haha, even if you put LEDs on every handle, under every door, in the boot, under the bonnet, you'd never have enough to blow a fuse.

But I'd be wary of using them in too many locations at the risk of turning your car into a christmas tree when you unlock it. :lol:

Last thing i want it my IS to end up on Barryboys!!!

Rab if i find a way to run a feed to the handles ill defo do a write up.


[Image: is200%20catoon.jpg] [Image: 104113415648fa201e2ecb5.gif] [Image: 91-bluescreen.gif]

jameshunter
Member
68
12-11-2018, 04:41 PM
#32
What about wiring them up threw the light on the ignition barrel or the handbrake !!!
Just a thaught
jameshunter
12-11-2018, 04:41 PM #32

What about wiring them up threw the light on the ignition barrel or the handbrake !!!
Just a thaught

jomo
Senior Member
709
12-11-2018, 05:03 PM
#33
jameshunter What about wiring them up threw the light on the ignition barrel or the handbrake !!!
Just a thaught

Was going to take a feed from the ign barrel light, just need to find a neat why into the door, so i dont have a random wire hanging in the door hing area.

[Image: is200%20catoon.jpg] [Image: 104113415648fa201e2ecb5.gif] [Image: 91-bluescreen.gif]
jomo
12-11-2018, 05:03 PM #33

jameshunter What about wiring them up threw the light on the ignition barrel or the handbrake !!!
Just a thaught

Was going to take a feed from the ign barrel light, just need to find a neat why into the door, so i dont have a random wire hanging in the door hing area.


[Image: is200%20catoon.jpg] [Image: 104113415648fa201e2ecb5.gif] [Image: 91-bluescreen.gif]

FirebirdPhil
Posting Freak
7,101
14-11-2018, 04:42 AM
#34
jomo Was going to take a feed from the ign barrel light, just need to find a neat why into the door, so i dont have a random wire hanging in the door hing area.

Straightened metal coat hanger bent over at one end will make getting through the rubber grommet between the door and car easy.

"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
14-11-2018, 04:42 AM #34

jomo Was going to take a feed from the ign barrel light, just need to find a neat why into the door, so i dont have a random wire hanging in the door hing area.

Straightened metal coat hanger bent over at one end will make getting through the rubber grommet between the door and car easy.


"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"

jomo
Senior Member
709
14-11-2018, 05:12 AM
#35
2tongues Straightened metal coat hanger bent over at one end will make getting through the rubber grommet between the door and car easy.

I thought they were on multi plugs, but just looked on ebay and the wireing loom doesnt look to have a multi plug end to it, so thats gonna be my way through.

[Image: is200%20catoon.jpg] [Image: 104113415648fa201e2ecb5.gif] [Image: 91-bluescreen.gif]
jomo
14-11-2018, 05:12 AM #35

2tongues Straightened metal coat hanger bent over at one end will make getting through the rubber grommet between the door and car easy.

I thought they were on multi plugs, but just looked on ebay and the wireing loom doesnt look to have a multi plug end to it, so thats gonna be my way through.


[Image: is200%20catoon.jpg] [Image: 104113415648fa201e2ecb5.gif] [Image: 91-bluescreen.gif]

FirebirdPhil
Posting Freak
7,101
14-11-2018, 06:32 AM
#36
Its where my speaker wires were fed through. I pre-bent the wire roughly to the same shape as the rubber, then fed it through.

"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
14-11-2018, 06:32 AM #36

Its where my speaker wires were fed through. I pre-bent the wire roughly to the same shape as the rubber, then fed it through.


"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"

jomo
Senior Member
709
14-11-2018, 01:40 PM
#37
Gonna be a job to do in the new year when the weathers a bit better.

Will do a full write up with lots of pics as and when i do it.

[Image: is200%20catoon.jpg] [Image: 104113415648fa201e2ecb5.gif] [Image: 91-bluescreen.gif]
jomo
14-11-2018, 01:40 PM #37

Gonna be a job to do in the new year when the weathers a bit better.

Will do a full write up with lots of pics as and when i do it.


[Image: is200%20catoon.jpg] [Image: 104113415648fa201e2ecb5.gif] [Image: 91-bluescreen.gif]

Pages (4): Previous 1 2 3 4
Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 3
Views 180
23-01-2021, 07:58 AM
Last Post by Sparkystav
Replies 3
Views 284
30-03-2019, 11:33 AM
Last Post by posty
Replies 5
Views 498
24-11-2018, 04:03 AM
Last Post by el_bandido
Replies 8
Views 559
06-04-2018, 10:24 AM
Last Post by Sparkystav
Replies 19
Views 1,245
25-01-2018, 03:28 PM
Last Post by is300_dino
Replies 10
Views 571
05-01-2018, 10:57 AM
Last Post by Sparkystav
Replies 3
Views 373
26-11-2017, 01:06 PM
Last Post by dimis
Replies 8
Views 469
25-09-2017, 12:28 AM
Last Post by steviewevie
Replies 18
Views 715
15-04-2017, 11:41 AM
Last Post by Bandit