My little project - IS200 Turbo
My little project - IS200 Turbo
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
29-09-2017, 09:27 AM #1,181Excellent mate, glad your getting improvements.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
hooting:The car was running nicely the other day after Ed tweaked the map to put some more fuelling after the ECU had been reset and so had to re-learn.
But yesterday I drove it a fair way and it was running way too rich ! It looked like the stock ECU had gone back to "normal", and hence the mapping changes were now putting in too much fuel.
Very annoying, since the change seemed to have happened pretty much overnight as the car stood in the street !
I'm going back to Fusion on Wednesday for the connections to be soldered anyway. What I will ask Ed about is perhaps having two maps loaded (you can switch between two maps on the e-Manage Ultimate), with one normal map (as before), and a second one with fuel added that I can switch to whenever my ECU gets reset (not something I can avoid, e.g. if the battery goes flat) ?
I'm pretty sure this issue is all down to the stock ECU "learning", and not the fault of the e-Manage.
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
01-10-2017, 09:03 AM #1,182Aaargh ! hooting:
The car was running nicely the other day after Ed tweaked the map to put some more fuelling after the ECU had been reset and so had to re-learn.
But yesterday I drove it a fair way and it was running way too rich ! It looked like the stock ECU had gone back to "normal", and hence the mapping changes were now putting in too much fuel.
Very annoying, since the change seemed to have happened pretty much overnight as the car stood in the street !
I'm going back to Fusion on Wednesday for the connections to be soldered anyway. What I will ask Ed about is perhaps having two maps loaded (you can switch between two maps on the e-Manage Ultimate), with one normal map (as before), and a second one with fuel added that I can switch to whenever my ECU gets reset (not something I can avoid, e.g. if the battery goes flat) ?
I'm pretty sure this issue is all down to the stock ECU "learning", and not the fault of the e-Manage.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
01-10-2017, 09:36 AM #1,183Can the stock ECU not be removed completely from the engine management side of things, or is the E-manage not that clever to run it all on its own??? Seams to me you have to remove it to run properly.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Think you need a Unichip :p
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
toxo You have to maintain the stock ECU to keep the instrument cluster running (and any other multiplexed devices). the solution here is to lose the stock cluster... dunno if it affects aircon as well?
It does mate,
even the fuel gauge, it measure the amount of injector firings to measure the fuel level, then compares to the in tank sender every quarter of a tank or so
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
01-10-2017, 11:35 AM #1,186toxo You have to maintain the stock ECU to keep the instrument cluster running (and any other multiplexed devices). the solution here is to lose the stock cluster... dunno if it affects aircon as well?
It does mate,
even the fuel gauge, it measure the amount of injector firings to measure the fuel level, then compares to the in tank sender every quarter of a tank or so
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
toxo That'd be sorted by replacing the instrument cluster though
but its such a nice cluster!
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
01-10-2017, 12:31 PM #1,189toxo That'd be sorted by replacing the instrument cluster though
but its such a nice cluster!
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
It's not like there's a big problem really, just me kind of testing things so see how close to "perfect" you can make such a conversion.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
01-10-2017, 02:03 PM #1,190The e-Manage Ultimate is a piggyback ECU so I'd have to swap that out for a standalone ECU, which would allow things to be controlled properly, allowing you to get rid of the electronic throttle and other interfering stuff. Sure you could get a different instrument cluster, but the whole thing would be a lot of work to get everything working properly, and I simply don't think it's worth it.
It's not like there's a big problem really, just me kind of testing things so see how close to "perfect" you can make such a conversion.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
4 Guest(s)
4 Guest(s)
Views 102,787
Last Post by
Views 67,727
Last Post by
Views 404
Last Post by
Views 1,483
Last Post by
Views 3,135
Last Post by