JapCarForum Cars, Cars, Cars! Project Cars My IS-V8-Turbo

My IS-V8-Turbo

My IS-V8-Turbo

Pages (53): Previous 19 10 11 12 1353 Next  
russelllinn
Posting Freak
1,034
30-06-2016, 01:17 PM
Marcus_1UZ HI mate, no it will only be running just under half of the maximum power it can produce, this engine will make 1000hp all day long, but to get that out of it i would have to take apart the engine and add pistons and rods, but on stock engine its good for about 480/500HP


Hi mate, yea it will only take about 8 or 9 psi with std ECU, but with that that should get me about 350BHP at the wheels Big Grin

All in all just freaking awesome :biggrin:
russelllinn
30-06-2016, 01:17 PM #101

Marcus_1UZ HI mate, no it will only be running just under half of the maximum power it can produce, this engine will make 1000hp all day long, but to get that out of it i would have to take apart the engine and add pistons and rods, but on stock engine its good for about 480/500HP


Hi mate, yea it will only take about 8 or 9 psi with std ECU, but with that that should get me about 350BHP at the wheels Big Grin

All in all just freaking awesome :biggrin:

Marcus_1UZ
Senior Member
511
04-07-2016, 12:28 AM
well i was out working on the car lastnight till 9.30pm, and i have a bit of oil comeing from the back of the sump :/ dam... jack the car up then i have to lift the engine up abit to get to the bolts at the back of sump, took the sump off only to see most of the sealer had gone,:w00t: so went out to get some new sealer, with that all done now. just have to wire up the fan and all the engine/bay work is done Smile

[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:
Marcus_1UZ
04-07-2016, 12:28 AM #102

well i was out working on the car lastnight till 9.30pm, and i have a bit of oil comeing from the back of the sump :/ dam... jack the car up then i have to lift the engine up abit to get to the bolts at the back of sump, took the sump off only to see most of the sealer had gone,:w00t: so went out to get some new sealer, with that all done now. just have to wire up the fan and all the engine/bay work is done Smile


[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:

Lexusboy
Posting Freak
9,267
04-07-2016, 12:36 AM
Have you got the car sprayed yet?
Or is this been done after the rest of the work has been done?
Lexusboy
04-07-2016, 12:36 AM #103

Have you got the car sprayed yet?
Or is this been done after the rest of the work has been done?

Marcus_1UZ
Senior Member
511
04-07-2016, 08:33 AM
Lexusboy Have you got the car sprayed yet?
Or is this been done after the rest of the work has been done?

Hi mate, no its not been done just yet, im only have it matt black any way, so should not to that long to do, then next year i will pay someone to do it, Smile

[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:
Marcus_1UZ
04-07-2016, 08:33 AM #104

Lexusboy Have you got the car sprayed yet?
Or is this been done after the rest of the work has been done?

Hi mate, no its not been done just yet, im only have it matt black any way, so should not to that long to do, then next year i will pay someone to do it, Smile


[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:

Marcus_1UZ
Senior Member
511
06-07-2016, 09:09 PM
well last night i was out there till 10pm fitting Greddy Turbo Timer, happy to say thats all working now, been trying to fit the Air/fuel metter, but not have much luck with, i will try today and see if i can get it working right. happy to say all the engine bay work is now doneSmile the only thing i have to do is disconnect the intank FPR so the one in the engine bay can then take over also fit new relay for the fuel/pump in the boot, once thats done i can then refit the back seats,

Theres is no room for battery in the engine bay any more, i have moved it to the boot, just waiting for the wires to get here and i can then fit that, im working on the front/bumper right now! and that should be done within the next day or 2 and thats all the work done then, all i will have to do then is paint the car Matt/Black or satin/black im not sure what one im going with yet...Smile

[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:
Marcus_1UZ
06-07-2016, 09:09 PM #105

well last night i was out there till 10pm fitting Greddy Turbo Timer, happy to say thats all working now, been trying to fit the Air/fuel metter, but not have much luck with, i will try today and see if i can get it working right. happy to say all the engine bay work is now doneSmile the only thing i have to do is disconnect the intank FPR so the one in the engine bay can then take over also fit new relay for the fuel/pump in the boot, once thats done i can then refit the back seats,

Theres is no room for battery in the engine bay any more, i have moved it to the boot, just waiting for the wires to get here and i can then fit that, im working on the front/bumper right now! and that should be done within the next day or 2 and thats all the work done then, all i will have to do then is paint the car Matt/Black or satin/black im not sure what one im going with yet...Smile


[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:

steviewevie
Posting Freak
7,993
06-07-2016, 10:46 PM
Marcus_1UZ Hi mate, im useing the LS400 auto box for now, i think the box is good for about 300/350 hp, just so i can get it on the road quicker, but i will be puting a R154 5 speed box thats out of the Turbo supra, next year,

You may already know about this, I but I came across the fact that Thor do a kit for mating a 1UZ-FE to an R154, details here.

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
06-07-2016, 10:46 PM #106

Marcus_1UZ Hi mate, im useing the LS400 auto box for now, i think the box is good for about 300/350 hp, just so i can get it on the road quicker, but i will be puting a R154 5 speed box thats out of the Turbo supra, next year,

You may already know about this, I but I came across the fact that Thor do a kit for mating a 1UZ-FE to an R154, details here.


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

Marcus_1UZ
Senior Member
511
06-07-2016, 11:47 PM
steviewevie You may already know about this, I but I came across the fact that Thor do a kit for mating a 1UZ-FE to an R154, details here.


Hi mate, yea i have seen that, Wink

[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:
Marcus_1UZ
06-07-2016, 11:47 PM #107

steviewevie You may already know about this, I but I came across the fact that Thor do a kit for mating a 1UZ-FE to an R154, details here.


Hi mate, yea i have seen that, Wink


[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:

russelllinn
Posting Freak
1,034
07-07-2016, 05:27 AM
Brilliant news Marcus, you must be itching to have it completed now as it's so close, a credit to you :thumbup1:
russelllinn
07-07-2016, 05:27 AM #108

Brilliant news Marcus, you must be itching to have it completed now as it's so close, a credit to you :thumbup1:

Marcus_1UZ
Senior Member
511
10-07-2016, 10:38 AM
Hi guys, The front bumper is all done now, did not come out the way i wantted it to but it looks good any way ( and no one else has it ) it will do for now! i started the repaint today, i was going to do the car matt black! but im now doing it satin black, just done the front bumper, i will put some pic,s up in the next 2 or 3 days, have it booked in for MOT next week Wink

[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:
Marcus_1UZ
10-07-2016, 10:38 AM #109

Hi guys, The front bumper is all done now, did not come out the way i wantted it to but it looks good any way ( and no one else has it ) it will do for now! i started the repaint today, i was going to do the car matt black! but im now doing it satin black, just done the front bumper, i will put some pic,s up in the next 2 or 3 days, have it booked in for MOT next week Wink


[SIGPIC][/SIGPIC]My Old IS200 V8 Turbo
* HKS BOV * HKS Turbo Wastegate * HKS Air Filter * DBA Gold Discs F/B * T4 turbo * Custom made 3" Exhaust to Turbo * Kei Office Coilovers * strut brace * Custom Rad & Pipes * Custom Intercooler & Pipes * Custom Manifold,s * Custom Fuel Lines * Custom Turbo Housing * Thats some of the items on the car, to much to list.
Outlaw jap club "Best Modified" Winner JAE 2009 :w00t:

Lexusboy
Posting Freak
9,267
10-07-2016, 11:06 AM
Well done mate such a large project and your so close to completing.

Well Done:thumbup:

Dont forget your tickets mate.
Are you still leaving on the Friday?
Lexusboy
10-07-2016, 11:06 AM #110

Well done mate such a large project and your so close to completing.

Well Done:thumbup:

Dont forget your tickets mate.
Are you still leaving on the Friday?

Pages (53): Previous 19 10 11 12 1353 Next  
Recently Browsing
 5 Guest(s)
Recently Browsing
 5 Guest(s)
Related Threads…
Replies 1,341
Views 67,928
08-02-2024, 01:53 AM
Last Post by Wayne
Replies 23
Views 1,431
04-01-2023, 03:30 PM
Last Post by aaron1991ellis
Replies 65
Views 4,909
21-12-2022, 09:37 AM
Last Post by jeffrosie
Replies 179
Views 13,976
17-12-2022, 10:34 AM
Last Post by phaebo
Replies 39
Views 3,911
13-12-2022, 01:00 PM
Last Post by N15_GTi
Replies 69
Views 12,925
25-11-2022, 04:48 AM
Last Post by Rabster
Replies 28
Views 3,403
30-07-2022, 06:45 PM
Last Post by Lexus RS200T
Replies 1,318
Views 86,625
05-06-2022, 08:23 AM
Last Post by sarah0
Replies 9
Views 3,726
11-11-2021, 01:10 AM
Last Post by Rabster
Replies 6
Views 2,130
20-06-2021, 04:50 AM
Last Post by Sparkystav