Melted my headlight in the oven :(
Melted my headlight in the oven :(
11-03-2018, 11:04 PM
http://i1033.photobucket.com/albums/a413...1303544286
To this?
http://i1238.photobucket.com/albums/ff48...G_0604.jpg
Everycloud
From this
http://i1033.photobucket.com/albums/a413...1303544286
To this?
http://i1238.photobucket.com/albums/ff48...G_0604.jpg
Everycloud
11-03-2018, 11:40 PM
I would try the oven again and keep a very close eye on it and try to move it back into shape a little more
![[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]](http://i1227.photobucket.com/albums/ee440/davis5835/Mobile%20Uploads/FB_IMG_1474048273787_zpsnbfq6a3s.jpg)
You could get eyelids but u still need to make sure the headlight is sealed correctly
I would try the oven again and keep a very close eye on it and try to move it back into shape a little more
![[Image: IMG_0782.jpg]](http://i830.photobucket.com/albums/zz230/hawk77pb/IMG_0782.jpg)
11-03-2018, 11:57 PM
MODS- Geomtry Done(WIM Settings) -Arm Rest -TRD Front skirt -18"Sport Alloy's(Thanks Widnes is200)- Lowered 40mm -Sports Grille(repositoned horns)- Hid's 6000k Dipped -Xenon 6500k Main- LED Tower Sidelights -LED boot light -36 LED Dome Light- Polished Stainless Gearknob- Chrome Tail Pipe -Stainless A/C Rings & Clock Panel - JDM dash tray -Clear Door Lenses with Blue LED's- 6" Altezza Aerial- TOM's Ram II Air Filter- Fog/Brake Conversion -Fan Washer Jets- Stainless Dials.
I think the eyelids is a very good idea, but as Lexuspat say's, you should make sure it's sealed properly or it will steam up and look $hit.
MODS- Geomtry Done(WIM Settings) -Arm Rest -TRD Front skirt -18"Sport Alloy's(Thanks Widnes is200)- Lowered 40mm -Sports Grille(repositoned horns)- Hid's 6000k Dipped -Xenon 6500k Main- LED Tower Sidelights -LED boot light -36 LED Dome Light- Polished Stainless Gearknob- Chrome Tail Pipe -Stainless A/C Rings & Clock Panel - JDM dash tray -Clear Door Lenses with Blue LED's- 6" Altezza Aerial- TOM's Ram II Air Filter- Fog/Brake Conversion -Fan Washer Jets- Stainless Dials.
11-03-2018, 11:59 PM
hock: did you put them in the microwave for an hour hock:
MODS- Geomtry Done(WIM Settings) -Arm Rest -TRD Front skirt -18"Sport Alloy's(Thanks Widnes is200)- Lowered 40mm -Sports Grille(repositoned horns)- Hid's 6000k Dipped -Xenon 6500k Main- LED Tower Sidelights -LED boot light -36 LED Dome Light- Polished Stainless Gearknob- Chrome Tail Pipe -Stainless A/C Rings & Clock Panel - JDM dash tray -Clear Door Lenses with Blue LED's- 6" Altezza Aerial- TOM's Ram II Air Filter- Fog/Brake Conversion -Fan Washer Jets- Stainless Dials.
Jesus Hawk hock: did you put them in the microwave for an hour hock:
MODS- Geomtry Done(WIM Settings) -Arm Rest -TRD Front skirt -18"Sport Alloy's(Thanks Widnes is200)- Lowered 40mm -Sports Grille(repositoned horns)- Hid's 6000k Dipped -Xenon 6500k Main- LED Tower Sidelights -LED boot light -36 LED Dome Light- Polished Stainless Gearknob- Chrome Tail Pipe -Stainless A/C Rings & Clock Panel - JDM dash tray -Clear Door Lenses with Blue LED's- 6" Altezza Aerial- TOM's Ram II Air Filter- Fog/Brake Conversion -Fan Washer Jets- Stainless Dials.
12-03-2018, 12:01 AM
hawk77ojc And by the way...they go well with potatoes on the side.
:lol::lol::lol:
MODS- Geomtry Done(WIM Settings) -Arm Rest -TRD Front skirt -18"Sport Alloy's(Thanks Widnes is200)- Lowered 40mm -Sports Grille(repositoned horns)- Hid's 6000k Dipped -Xenon 6500k Main- LED Tower Sidelights -LED boot light -36 LED Dome Light- Polished Stainless Gearknob- Chrome Tail Pipe -Stainless A/C Rings & Clock Panel - JDM dash tray -Clear Door Lenses with Blue LED's- 6" Altezza Aerial- TOM's Ram II Air Filter- Fog/Brake Conversion -Fan Washer Jets- Stainless Dials.
hawk77ojc And by the way...they go well with potatoes on the side.
:lol::lol::lol:
MODS- Geomtry Done(WIM Settings) -Arm Rest -TRD Front skirt -18"Sport Alloy's(Thanks Widnes is200)- Lowered 40mm -Sports Grille(repositoned horns)- Hid's 6000k Dipped -Xenon 6500k Main- LED Tower Sidelights -LED boot light -36 LED Dome Light- Polished Stainless Gearknob- Chrome Tail Pipe -Stainless A/C Rings & Clock Panel - JDM dash tray -Clear Door Lenses with Blue LED's- 6" Altezza Aerial- TOM's Ram II Air Filter- Fog/Brake Conversion -Fan Washer Jets- Stainless Dials.
12-03-2018, 12:21 AM
cared:TommyH Jesus Hawk
No mate, they were in there for less then 10 minutes on 180 degrees forced fan. after i took them out I laughed at them as the casing looks like the mask from Scream series...
ad:![[Image: images2.jpg]](http://i830.photobucket.com/albums/zz230/hawk77pb/images2.jpg)
cared:
TommyH Jesus Hawk
No mate, they were in there for less then 10 minutes on 180 degrees forced fan. after i took them out I laughed at them as the casing looks like the mask from Scream series...
ad:
12-03-2018, 12:30 AM
' Yeh same here was in for 180 for about 8 mins and was beginning to wobble like jelly, come to think of it the scream mask is right!!lolStrange because my other light was in for about 15 mins and was absolutey fine!
****** heck hawk! Glad I'm not the first ' Yeh same here was in for 180 for about 8 mins and was beginning to wobble like jelly, come to think of it the scream mask is right!!lol
Strange because my other light was in for about 15 mins and was absolutey fine!
Recently Browsing
8 Guest(s)
8 Guest(s)
Recently Browsing
8 Guest(s)
8 Guest(s)
Related Threads…
Replies 6
Views 293
Views 293
01-11-2019, 02:01 PM
Last Post byrigga
Last Post by
Replies 13
Views 738
Views 738
28-08-2019, 02:06 PM
Last Post byparthiban
Last Post by
Replies 25
Views 1,277
Views 1,277
08-08-2019, 01:11 PM
Last Post byChris0121
Last Post by
Replies 11
Views 776
Views 776
08-08-2019, 09:22 AM
Last Post byparthiban
Last Post by
Replies 2
Views 306
Views 306
09-05-2019, 12:39 PM
Last Post byjasons
Last Post by
Replies 4
Views 397
Views 397
09-04-2019, 10:50 PM
Last Post bypurplewitch
Last Post by
Replies 8
Views 585
Views 585
07-03-2019, 10:47 PM
Last Post bynimrodmk3
Last Post by
Replies 6
Views 443
Views 443
21-12-2018, 12:36 PM
Last Post byis300_dino
Last Post by
Replies 15
Views 1,063
Views 1,063
04-07-2018, 03:22 AM
Last Post bymattross1313
Last Post by