My IS-V8-Turbo
My IS-V8-Turbo
Marcus_1UZ HI mate, no it will only be running just under half of the maximum power it can produce, this engine will make 1000hp all day long, but to get that out of it i would have to take apart the engine and add pistons and rods, but on stock engine its good for about 480/500HP
Hi mate, yea it will only take about 8 or 9 psi with std ECU, but with that that should get me about 350BHP at the wheels
Marcus_1UZ HI mate, no it will only be running just under half of the maximum power it can produce, this engine will make 1000hp all day long, but to get that out of it i would have to take apart the engine and add pistons and rods, but on stock engine its good for about 480/500HP
Hi mate, yea it will only take about 8 or 9 psi with std ECU, but with that that should get me about 350BHP at the wheels
well i was out working on the car lastnight till 9.30pm, and i have a bit of oil comeing from the back of the sump :/ dam... jack the car up then i have to lift the engine up abit to get to the bolts at the back of sump, took the sump off only to see most of the sealer had gone,:w00t: so went out to get some new sealer, with that all done now. just have to wire up the fan and all the engine/bay work is done
Lexusboy Have you got the car sprayed yet?
Or is this been done after the rest of the work has been done?
Lexusboy Have you got the car sprayed yet?
Or is this been done after the rest of the work has been done?
well last night i was out there till 10pm fitting Greddy Turbo Timer, happy to say thats all working now, been trying to fit the Air/fuel metter, but not have much luck with, i will try today and see if i can get it working right. happy to say all the engine bay work is now done the only thing i have to do is disconnect the intank FPR so the one in the engine bay can then take over also fit new relay for the fuel/pump in the boot, once thats done i can then refit the back seats,
Theres is no room for battery in the engine bay any more, i have moved it to the boot, just waiting for the wires to get here and i can then fit that, im working on the front/bumper right now! and that should be done within the next day or 2 and thats all the work done then, all i will have to do then is paint the car Matt/Black or satin/black im not sure what one im going with yet...
Marcus_1UZ Hi mate, im useing the LS400 auto box for now, i think the box is good for about 300/350 hp, just so i can get it on the road quicker, but i will be puting a R154 5 speed box thats out of the Turbo supra, next year,
Marcus_1UZ Hi mate, im useing the LS400 auto box for now, i think the box is good for about 300/350 hp, just so i can get it on the road quicker, but i will be puting a R154 5 speed box thats out of the Turbo supra, next year,
steviewevie You may already know about this, I but I came across the fact that Thor do a kit for mating a 1UZ-FE to an R154, details here.
steviewevie You may already know about this, I but I came across the fact that Thor do a kit for mating a 1UZ-FE to an R154, details here.
Brilliant news Marcus, you must be itching to have it completed now as it's so close, a credit to you :thumbup1:
Hi guys, The front bumper is all done now, did not come out the way i wantted it to but it looks good any way ( and no one else has it ) it will do for now! i started the repaint today, i was going to do the car matt black! but im now doing it satin black, just done the front bumper, i will put some pic,s up in the next 2 or 3 days, have it booked in for MOT next week