Gearbox Oil Change
Gearbox Oil Change
The key is to remember to remove the filler plug first before you drain the oil out. And as per quite a few cars, the refill process is to fill it up until it overflows - gearbox oil is nasty stuff so make sure you catch / clean up any overspill. And obviously the car has to be level when you fill it!
Just for info, i've used this method before for filling the gearbox. The last time was recently when i replaced my clutch, I changed the oil when the gearbox was on the bench - so much easier.
I put a drip tray under the gearbox (very important). I undid the fill plug and ran a length of tube from the gearbox up into the engine bay next to the exhaust manifold. Wedged a funnel into the end of the tube then filled to spill.
Yeah, it makes a bit of a mess but it's easier than having the car on axle stands and messing about under the gearbox with odd shaped bottles and inflexible spouts.
Of course if i had a pump i'd use that instead :tongue_smilie:.
True, the last lot of oil I got had integral tubes, but the one before that didn't for some reason. But like i said, I did the last oil change while the transmission was off and sitting on the bench.
That is truely the easiest way of doing an oil change......if you don't mind the hassle of taking the transmission off :biggrin:
Lexuspat Most 1ltr bottles now have the tube inside so u can pour it in without messing around to much, or at least the ones I have purchased lately
Lexuspat Most 1ltr bottles now have the tube inside so u can pour it in without messing around to much, or at least the ones I have purchased lately