My little project - IS200 Turbo
My little project - IS200 Turbo
toxo Who says you can't do both?
Waiting for details Stevie...
Most people would run both, I think. Though Steve mentioned the stock ECUs being REPLACED. I think that is what Dan was questioning.
![[Image: tempsig2.jpg]](http://i121.photobucket.com/albums/o227/84stoney/tempsig2.jpg)
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:toxo Who says you can't do both?
Waiting for details Stevie...
Most people would run both, I think. Though Steve mentioned the stock ECUs being REPLACED. I think that is what Dan was questioning.
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:
I will post some proper updates and pics when I get a chance. Dyno graphs too. For now, just to clarify, yes the stock ECU has been removed completely, and I have a Syvecs S6GP running everything.
Gauges were fine to get working again, except for the water temp gauge, so I have a Defi gauge to give me that info. Fuel gauge and rev counter were no problem.
The stock immobiliser is operated through the stock ECU, so I had to install a third party alarm/immobiliser to be compliant with insurance requirements (i.e. my insurers need me to have a Thatcham immobiliser).
As I said, I do intend to post some proper updates and full details, along with issues that were hit and solved along the way. Just wanted to answer some of the questions raised.
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
12-11-2018, 03:04 AM #1,223The rumours of my demise were greatly exaggerated, yes I am still alive
I will post some proper updates and pics when I get a chance. Dyno graphs too. For now, just to clarify, yes the stock ECU has been removed completely, and I have a Syvecs S6GP running everything.
Gauges were fine to get working again, except for the water temp gauge, so I have a Defi gauge to give me that info. Fuel gauge and rev counter were no problem.
The stock immobiliser is operated through the stock ECU, so I had to install a third party alarm/immobiliser to be compliant with insurance requirements (i.e. my insurers need me to have a Thatcham immobiliser).
As I said, I do intend to post some proper updates and full details, along with issues that were hit and solved along the way. Just wanted to answer some of the questions raised.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
looking forward to reading some more mate be good to have some full updates on this model as the thread shows it in great details from day one
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
12-11-2018, 03:37 AM #1,225But in the mean time: :merrychristmas:
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
12-11-2018, 05:20 AM #1,226sounds good mate
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
As you will see from some of my previous posts, my turbo install with the e-Manage Ultimate was sometimes good, but sometimes irritating. This wasn't the fault of the e-Manage, but more an issue of it being a piggyback setup. The e-Manage was setup with a perfectly good map (well, two maps actually, see my previous post about switching between two maps on the fly), but sometimes it seemed like the stock ECU decided to do something a bit different, and the e-Manage couldn't cope with that (nor would any piggyback ECU).
For those not familiar with how this setup works, what the e-Manage was doing was sitting between the stock Lexus ECU and the engine. So when the stock ECU called for a certain amount of fuel, for example, the e-Manage could adjust this and put more/less fuel in. Similarly with the ignition timing. But with a fixed map, if the stock ECU changed its behaviur, then the e-Manage would just carry on as normal and suddenly things could go a bit weird (e.g. stalling or running a bit rough).
I had been trying to just live with the issues, but I decided to investigate the options for a standalone ECU. A standalone ECU would have full control of the engine, with no interference from elsewhere, so it should be able to provide a more driveable solution. There were potential downsides though, not least the cost/complexity/time for such an exercise. Was it really worth it ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
05-01-2019, 01:14 AM #1,227Right, time to get the ball rolling again here. I am going to bring this thread up to date with the work that was done on my car last year, plus what I am doing it to the moment (other stuff than the ECU).
As you will see from some of my previous posts, my turbo install with the e-Manage Ultimate was sometimes good, but sometimes irritating. This wasn't the fault of the e-Manage, but more an issue of it being a piggyback setup. The e-Manage was setup with a perfectly good map (well, two maps actually, see my previous post about switching between two maps on the fly), but sometimes it seemed like the stock ECU decided to do something a bit different, and the e-Manage couldn't cope with that (nor would any piggyback ECU).
For those not familiar with how this setup works, what the e-Manage was doing was sitting between the stock Lexus ECU and the engine. So when the stock ECU called for a certain amount of fuel, for example, the e-Manage could adjust this and put more/less fuel in. Similarly with the ignition timing. But with a fixed map, if the stock ECU changed its behaviur, then the e-Manage would just carry on as normal and suddenly things could go a bit weird (e.g. stalling or running a bit rough).
I had been trying to just live with the issues, but I decided to investigate the options for a standalone ECU. A standalone ECU would have full control of the engine, with no interference from elsewhere, so it should be able to provide a more driveable solution. There were potential downsides though, not least the cost/complexity/time for such an exercise. Was it really worth it ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
Almost Finished
05-01-2019, 01:41 AM #1,229Good news Stevie , hope you are happy with your car now :thumbup:
I wanted to make a start on posting the info, only just started, might be a bit piecemeal though !
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
05-01-2019, 04:17 AM #1,230Yes, I'm very happy with it now. But I have a *lot* more detail to fill in, between then and now !
I wanted to make a start on posting the info, only just started, might be a bit piecemeal though !
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
7 Guest(s)
7 Guest(s)
Views 102,750
Last Post by
Views 67,675
Last Post by
Views 404
Last Post by
Views 1,483
Last Post by
Views 3,127
Last Post by