Illuminated door handles?
Illuminated door handles?
12-11-2018, 04:21 AM
Place the negative cable of the LED strip on the negative of the battery
Place the positive of the Multimeter on positive of the battery
place negative of multimeter to positive of led strip
with multimeter set to amps turn it on and voilà the strip should illuminate and you will have a reading on the multimeter this is the reading in amps etc.....
hope that helps
ok what you need to do
Place the negative cable of the LED strip on the negative of the battery
Place the positive of the Multimeter on positive of the battery
place negative of multimeter to positive of led strip
with multimeter set to amps turn it on and voilà the strip should illuminate and you will have a reading on the multimeter this is the reading in amps etc.....
hope that helps
12-11-2018, 05:05 AM
jomo Ok mate cheers., ill give it a go.
How do i find out what's the max i can draw from the ign light wire, without setting my car alight!
Cheers.
Trust me, you won't overload it with LED's.
I had a 7" LCD screen, a 12v netbook charger, and a satnav all running off my cigarette lighter at times and nothing got warm. Although I wouldn't want to do that too often.
I ran a strip of those 24 LED's off a power supply at work, which allows it to just take as much power as it needs, and then shows you on a digital readout. I can't remember the numbers but it's seriously nothing to get worried about. You'd need literally thousands of those LEDs before anything blew.
sprinter2012
12-11-2018, 05:05 AM #16jomo Ok mate cheers., ill give it a go.
How do i find out what's the max i can draw from the ign light wire, without setting my car alight!
Cheers.
Trust me, you won't overload it with LED's.
I had a 7" LCD screen, a 12v netbook charger, and a satnav all running off my cigarette lighter at times and nothing got warm. Although I wouldn't want to do that too often.
I ran a strip of those 24 LED's off a power supply at work, which allows it to just take as much power as it needs, and then shows you on a digital readout. I can't remember the numbers but it's seriously nothing to get worried about. You'd need literally thousands of those LEDs before anything blew.
12-11-2018, 07:37 AM
sprinter2012 Trust me, you won't overload it with LED's.
I had a 7" LCD screen, a 12v netbook charger, and a satnav all running off my cigarette lighter at times and nothing got warm. Although I wouldn't want to do that too often.
I ran a strip of those 24 LED's off a power supply at work, which allows it to just take as much power as it needs, and then shows you on a digital readout. I can't remember the numbers but it's seriously nothing to get worried about. You'd need literally thousands of those LEDs before anything blew.
Thousands!!!! dont tempt me Sprinter!!! lol.
That go to know as i was thinking of putting pudle lights on the rear doors from the front door red marker light.
![[Image: is200%20catoon.jpg]](http://flq9hg.bay.livefilestore.com/y1pRfa3kPJrnHVEEHC2z47vTNROlbG9FgRzmsEz8ZJ_VKFAF-7kyMer9T68W0uCDsvklEH6MoYkQuRH5knPTs01Eg/is200%20catoon.jpg)
![[Image: 104113415648fa201e2ecb5.gif]](http://i19.photobucket.com/albums/b200/pugtop/104113415648fa201e2ecb5.gif)
![[Image: 91-bluescreen.gif]](http://www.ttp-clan.co.uk/datas/users/91-bluescreen.gif)
sprinter2012 Trust me, you won't overload it with LED's.
I had a 7" LCD screen, a 12v netbook charger, and a satnav all running off my cigarette lighter at times and nothing got warm. Although I wouldn't want to do that too often.
I ran a strip of those 24 LED's off a power supply at work, which allows it to just take as much power as it needs, and then shows you on a digital readout. I can't remember the numbers but it's seriously nothing to get worried about. You'd need literally thousands of those LEDs before anything blew.
Thousands!!!! dont tempt me Sprinter!!! lol.
That go to know as i was thinking of putting pudle lights on the rear doors from the front door red marker light.
12-11-2018, 08:13 AM
A t5 SMD would fit the bill, really small and puts out a lot of light.
el_bandido
12-11-2018, 08:13 AM #19I can understand the logic in illuminating underneath the exterior door handles when you unlock the car. Interior door handle lights are a bit drug dealerish
A t5 SMD would fit the bill, really small and puts out a lot of light.
Recently Browsing
1 Guest(s)
1 Guest(s)
Recently Browsing
1 Guest(s)
1 Guest(s)
Related Threads…
Replies 5
Views 498
Views 498
24-11-2018, 04:03 AM
Last Post byel_bandido
Last Post by
Replies 19
Views 1,245
Views 1,245
25-01-2018, 03:28 PM
Last Post byis300_dino
Last Post by
Replies 15
Views 993
Views 993
28-11-2017, 06:08 AM
Last Post bySparkystav
Last Post by
Replies 3
Views 375
Views 375
26-11-2017, 01:06 PM
Last Post bydimis
Last Post by