Part numbers needed for wheel arch spacers when fitting TRD lip/skirts
Part numbers needed for wheel arch spacers when fitting TRD lip/skirts
I'm sure I've seen a thread at some point where someone posted up a picture of the parts diagram but I can't find it for the life of me.
To clarify, I need 1 x front arch spacer set and 1 x rear arch spacer set
So if anyone has the part numbers, or is able to get me a set that would be great.
sprinter2012
05-02-2019, 08:29 AM #1Hopefully won't be too long until I can get my TRD skirts and rear lip fitted, but my car has mud guards so I need to fit the plastic spacers to pad out the ends of the skirts/lip so they fit properly.
I'm sure I've seen a thread at some point where someone posted up a picture of the parts diagram but I can't find it for the life of me.
To clarify, I need 1 x front arch spacer set and 1 x rear arch spacer set
So if anyone has the part numbers, or is able to get me a set that would be great.
![[Image: DSC01379.jpg]](http://i206.photobucket.com/albums/bb160/foodie69jason/DSC01379.jpg)
And I have actually now managed to find the thread I was thinking of, but it only has the part numbers for the front ones on it.
'protector, FR Fender' = 53827-53010
'protector, FR Fender' = 53828-53010
So I still need the part numbers for the small ones that go on the back.
sprinter2012
05-02-2019, 08:36 AM #2These are the bits I need...
And I have actually now managed to find the thread I was thinking of, but it only has the part numbers for the front ones on it.
'protector, FR Fender' = 53827-53010
'protector, FR Fender' = 53828-53010
So I still need the part numbers for the small ones that go on the back.
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
why do you want the ones that go on the rear bumper?ie the wee ones?you dont need them...they get the bin when fitting the rear lip
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
260983155976
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
06-02-2019, 11:49 AM #4What about eBay item:
260983155976
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
ormi why do you want the ones that go on the rear bumper?ie the wee ones?you dont need them...they get the bin when fitting the rear lip
I thought the rear lip needed them too, as there was a bit of a gap when I fitted my TTE lip because I had mudguards fitted before? Is it the same for the TRD and TTE rear lips?
Sparkystav What about eBay item:
260983155976
Good spot!
sprinter2012
06-02-2019, 11:58 AM #5ormi why do you want the ones that go on the rear bumper?ie the wee ones?you dont need them...they get the bin when fitting the rear lip
I thought the rear lip needed them too, as there was a bit of a gap when I fitted my TTE lip because I had mudguards fitted before? Is it the same for the TRD and TTE rear lips?
Sparkystav What about eBay item:
260983155976
Good spot!
sprinter2012 These are the bits I need...
And I have actually now managed to find the thread I was thinking of, but it only has the part numbers for the front ones on it.
'protector, FR Fender' = 53827-53010
'protector, FR Fender' = 53828-53010
So I still need the part numbers for the small ones that go on the back.
Those are mine and still knocking round the garage if needed...
sprinter2012 These are the bits I need...
And I have actually now managed to find the thread I was thinking of, but it only has the part numbers for the front ones on it.
'protector, FR Fender' = 53827-53010
'protector, FR Fender' = 53828-53010
So I still need the part numbers for the small ones that go on the back.
Those are mine and still knocking round the garage if needed...
2 Guest(s)
2 Guest(s)
Views 347
Last Post by
Views 154
Last Post by
Views 180
Last Post by
Views 177
Last Post by
Views 658
Last Post by
Views 366
Last Post by