Jimbobs Lexus IS200 Turbo!
Jimbobs Lexus IS200 Turbo!
LEXUS IS200 - The most fun car to go sideways
fitting the sandwich plate with an OEM size oil filter you will have problem with space. There is not enough space to fit an OEM size oil filter. I know this from my Mocal oil cooler which comes with a sanwich plate. There was no space to fit an OEM oil filter, so I had to fit an oil filter half the size in length.
LEXUS IS200 - The most fun car to go sideways
Jimbob-T-Lex
13-11-2019, 10:31 AM #223Yeah i did recall reading it somewhere im sure they mentioned the TRD one is ok to fit although if Sparkystav is sucessful finding those parts may not have a problem at all
Jimbob-T-Lex
13-11-2019, 11:16 AM #225oh right well where ever i read that was wrong then what filter can i use then mate?
jimbob150385 oh right well where ever i read that was wrong then what filter can i use then mate?
After a lot of search I ended up with HKS oil filter for a 2JZGTE engine. It has the half lenght from OEM. You just have to check that the diameter of the filter will fit on your sandwich plate and there will be no oil leakage.
LEXUS IS200 - The most fun car to go sideways
jimbob150385 oh right well where ever i read that was wrong then what filter can i use then mate?
After a lot of search I ended up with HKS oil filter for a 2JZGTE engine. It has the half lenght from OEM. You just have to check that the diameter of the filter will fit on your sandwich plate and there will be no oil leakage.
LEXUS IS200 - The most fun car to go sideways
Jimbob-T-Lex
17-11-2019, 07:47 AM #227Major dilema and getting angry read and told its the GSS342 Walbro i need and it does not fit cannot clip the bottom on its a proper walbro and the gss342 what is happening lol
The inlet and outlet are on the same side yes (though opposite ends)?
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
17-11-2019, 08:01 AM #228Have you just just pushed it in to the holder, or removed the black rubber seal, slid that down the neck of the pump then pushed it in?
The inlet and outlet are on the same side yes (though opposite ends)?
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Jimbob-T-Lex
17-11-2019, 08:05 AM #229yeah inlet is the same side it just seems to be to long mate its just not making sense! i slid the rubber down the lot but still by the time i put filter on the pump the bottom was never gonna fit
Send it on fb if you want
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
17-11-2019, 08:07 AM #230Hmm got a pic of it mate? Mines exactly the same and fits straight in with no mods.
Send it on fb if you want
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
3 Guest(s)
3 Guest(s)
Views 102,782
Last Post by
Views 404
Last Post by
Views 1,483
Last Post by
Views 5,982
Last Post by
Views 3,135
Last Post by