Jimbobs Lexus IS200 Turbo!
Jimbobs Lexus IS200 Turbo!
Jimbob-T-Lex
29-11-2019, 09:43 AM #273not to worry mate i found prius rings with the same bore and top ring size but been looking at whether i could use a second ring as a top compression ring and it a no go so gonna have to order 2 sets of prius rings pain but such as life
Jimbob-T-Lex
01-12-2019, 07:15 AM #274Right im gonna hook up the greddy tomorrow but i obviously dont want it to interfere as the turbo lump is not on can i just hook up but leave the ign on cable disconnected or can i hook it all up but just have all the switches set to off on the front (obviously i wont cut the cables that need to before i get the turbo lump in) just trying to save time later on??
Set everything on it to zero. But you'll need the correct engine settings programmed in.
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
01-12-2019, 09:28 AM #275Hook it up. You'll need to have power to it or nothing will work.
Set everything on it to zero. But you'll need the correct engine settings programmed in.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Ive still got to use the car for work at the minute so dont want to have her not working as using my dads soarer todo 80miles a day is gonna kill me lol
Jimbob-T-Lex
01-12-2019, 11:43 PM #276do you once it is wired in go to the settings on the laptop and set all to zero? I was having a look at the programme and you can select 1gfe as the vehicle will this not put the engine settings on mate?
Ive still got to use the car for work at the minute so dont want to have her not working as using my dads soarer todo 80miles a day is gonna kill me lol
Jimbob-T-Lex
02-12-2019, 01:34 AM #277Think ive worked it out mate by reading about! one thing i dont get when i looked over the greddy install write up they have a map sensor installed inside from the throttle body i know its the absolute pressure but dont the is200 have one or is it just that it doesnt have the correct range of measurement? im quite lost on map sensors lol im stabbing in the dark really thought is was to check the egr valve! pmsl
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
02-12-2019, 02:18 AM #278The is map sensor runs out of space about 0.5 bar I seem to remember. So you need a separate map sensor for anything over that.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Jimbob-T-Lex
02-12-2019, 04:37 AM #279Ok mate well i havent got a map sensor yet can i just leave this wire or will this not work at all if i hook the rest up im not sure what the standard map pin out is on the ecu
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
02-12-2019, 10:46 AM #280Yeah you don't have to hook that up now but you'll need to eventually to stop fuel cut.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
4 Guest(s)
4 Guest(s)
Views 102,828
Last Post by
Views 404
Last Post by
Views 1,484
Last Post by
Views 6,004
Last Post by
Views 3,135
Last Post by