JapCarForum Cars, Cars, Cars! Project Cars Jimbobs Lexus IS200 Turbo!

Jimbobs Lexus IS200 Turbo!

Jimbobs Lexus IS200 Turbo!

Pages (135): Previous 127 28 29 30 31135 Next  
Jimbob-T-Lex
Moderator
1,674
03-12-2019, 07:38 AM
Right well not the best weekend i have been emailing about getting some quotes on getting my bumpers and skirts sprayed.

Drilled and retapped the sandwich plate so now my sensors fit now.

Today i took the flush boot off and have put the old silver one back on not sure whether to get the flush one sprayed and back on, just thinking of the money shortage and dont want a multi colored car for the peterborough meet lol

Didnt get too far on the wire up of the greddy lol just havent had the time but its all in and cables all labelled up ready for a free weekend when ever that may be lol

Ill get some pics soon not really took alot been slacking a bit
Jimbob-T-Lex
03-12-2019, 07:38 AM #281

Right well not the best weekend i have been emailing about getting some quotes on getting my bumpers and skirts sprayed.

Drilled and retapped the sandwich plate so now my sensors fit now.

Today i took the flush boot off and have put the old silver one back on not sure whether to get the flush one sprayed and back on, just thinking of the money shortage and dont want a multi colored car for the peterborough meet lol

Didnt get too far on the wire up of the greddy lol just havent had the time but its all in and cables all labelled up ready for a free weekend when ever that may be lol

Ill get some pics soon not really took alot been slacking a bit

Jimbob-T-Lex
Moderator
1,674
05-12-2019, 09:48 AM
When installing the greddy there is the knock sensor wires do you install to knock sensors or to the intake temp as in the greddy book both are on the same wire so i take its either or??
Jimbob-T-Lex
05-12-2019, 09:48 AM #282

When installing the greddy there is the knock sensor wires do you install to knock sensors or to the intake temp as in the greddy book both are on the same wire so i take its either or??

Sparkystav
Administrator
14,683
05-12-2019, 10:20 AM
Yep either or mate.

I'd use water and intake temp instead of knock.

OutlawJapClub Admin Team
Sparkystav
05-12-2019, 10:20 AM #283

Yep either or mate.

I'd use water and intake temp instead of knock.


OutlawJapClub Admin Team

Jimbob-T-Lex
Moderator
1,674
05-12-2019, 10:24 AM
ok mate cheers just need to get the car in the garage so nice and warm gonna be terrible trying to solder in this temp lol
Jimbob-T-Lex
05-12-2019, 10:24 AM #284

ok mate cheers just need to get the car in the garage so nice and warm gonna be terrible trying to solder in this temp lol

Sparkystav
Administrator
14,683
05-12-2019, 01:17 PM
Lol could drive to mine and use my garage, bit of a trek though

OutlawJapClub Admin Team
Sparkystav
05-12-2019, 01:17 PM #285

Lol could drive to mine and use my garage, bit of a trek though


OutlawJapClub Admin Team

Jimbob-T-Lex
Moderator
1,674
16-12-2019, 04:03 AM
Right today was a big spend day so i have ordered:

550cc injectors
new front bumper
engine hoist
stage 2 panther clutch kit
new water pump
new stereo facia
piston rings to fit the 1ggte pistons lol
cant get hold of the bloke to get arp mains bolts so ill call him monday!

hopefully over the next couple of weeks i should see some good progress with the build and ill get planty of pictures up watch this space lol
Jimbob-T-Lex
16-12-2019, 04:03 AM #286

Right today was a big spend day so i have ordered:

550cc injectors
new front bumper
engine hoist
stage 2 panther clutch kit
new water pump
new stereo facia
piston rings to fit the 1ggte pistons lol
cant get hold of the bloke to get arp mains bolts so ill call him monday!

hopefully over the next couple of weeks i should see some good progress with the build and ill get planty of pictures up watch this space lol

mattlaw
Senior Member
572
16-12-2019, 04:06 AM
Where did u manage to get the rings from?
mattlaw
16-12-2019, 04:06 AM #287

Where did u manage to get the rings from?

Jimbob-T-Lex
Moderator
1,674
16-12-2019, 04:11 AM
well what i have had to do is im using the oil and 2nd ring from the the 1gfe pistons and researched about and found out that the toyota prius has the same bore and the correct size top compression ring, the only problen being is that the prius is only a 4 cylinder so had to order two sets and have alot of rings spare lol on the 1ggte pistons the rings have to be 1.2 x 1.5 x 4 and the prius ones are 1.2 x 1.2 x 2 if i recall and the 1gfe ones are 1.5 x 1.5 x 4
Jimbob-T-Lex
16-12-2019, 04:11 AM #288

well what i have had to do is im using the oil and 2nd ring from the the 1gfe pistons and researched about and found out that the toyota prius has the same bore and the correct size top compression ring, the only problen being is that the prius is only a 4 cylinder so had to order two sets and have alot of rings spare lol on the 1ggte pistons the rings have to be 1.2 x 1.5 x 4 and the prius ones are 1.2 x 1.2 x 2 if i recall and the 1gfe ones are 1.5 x 1.5 x 4

john wan
Posting Freak
890
16-12-2019, 10:30 AM
Nice write up dude Did you buy the hoist? I rented mine tok the engine out an back in in a day think it was 50 quid friday to monday
john wan
16-12-2019, 10:30 AM #289

Nice write up dude Did you buy the hoist? I rented mine tok the engine out an back in in a day think it was 50 quid friday to monday

Jimbob-T-Lex
Moderator
1,674
17-12-2019, 08:28 AM
Yeah just bought the hoist never know when i may need one again lol just wanted to have one so i didnt feel the need to rush at all
Jimbob-T-Lex
17-12-2019, 08:28 AM #290

Yeah just bought the hoist never know when i may need one again lol just wanted to have one so i didnt feel the need to rush at all

Pages (135): Previous 127 28 29 30 31135 Next  
Recently Browsing
 2 Guest(s)
Recently Browsing
 2 Guest(s)
Related Threads…
Replies 91
Views 5,140
09-04-2024, 01:09 AM
Last Post by Sparkystav
Replies 21
Views 1,292
06-04-2024, 05:57 PM
Last Post by Lexuspat
Replies 1,312
Views 102,922
25-03-2024, 02:10 AM
Last Post by ZAIS200
Replies 194
Views 9,103
23-03-2024, 03:45 PM
Last Post by Wayne
Replies 414
Views 20,439
18-02-2024, 11:42 PM
Last Post by is200turbo
Replies 4
Views 405
18-12-2023, 02:55 AM
Last Post by Rabster
Replies 20
Views 1,491
08-10-2023, 03:59 AM
Last Post by Wayne
Replies 95
Views 6,024
06-10-2023, 02:58 AM
Last Post by Wayne
Replies 42
Views 3,144
04-10-2023, 03:52 PM
Last Post by Wayne
Replies 76
Views 2,822
30-09-2023, 01:24 AM
Last Post by RichS11