JapCarForum Cars, Cars, Cars! Project Cars another is200 project

another is200 project

another is200 project

Pages (37): 1 2 3 4 537 Next  
john wan
Posting Freak
890
05-11-2019, 08:11 AM
#1
Hi so took me ages to come round to buying an is200 after test driving thought they were slow but awesome inside and out love the aggressive looks love the car just needs mare POOOOOOOOOWERRRRRR

thought id do a thread as ive had plans for a while well since not long after buying the car all will become clear here she is

[Image: IMG-20120406-00386_zpsc4a49ebf.jpg]

so this thread is gonna be a bit bitty as i dont get to be on the pc for great lengths of time.
so the first thing i noticed was that the lexus tends to not be as stiffer ride as im used to i bought was lowering springs as i like cars to be a bit lower

[Image: IMG-20120407-00395_zpsfb6bc637.jpg]

[Image: IMG-20120315-00361.jpg]

[Image: IMG-20120406-00389_zpsb94edd32.jpg]

[Image: IMG-20120406-00391_zpsaf47eab0.jpg]


went for 50mm then got some polyurathaine arb bushes and some washers and made up some pineapples for the rear subframe ,i knew tightening up the subframe helps had locking collars on my s14 helped instantly

[Image: IMG-20120603-00504_zpsa1425f33.jpg]

[Image: IMG-20120603-00507_zps81e774c8.jpg]

[Image: IMG-20120603-00511_zpsf3b230bf.jpg]

also found some solid diff bushes the observant people will see that theres one missing had to make one up out of some ally

[Image: IMG-20120417-00408_zps7f881ac3.jpg]

[Image: IMG-20120708-00575_zps7762161a.jpg]

how they look fitted

[Image: IMG-20120708-00577_zpsa0761bcd.jpg]




also bought a subframe with arms got the arms bead blasted then sprayed them up havnt fitted them yet need to get some polly bushes how they look now

[Image: IMG-20120513-00439_zpsabea00fd.jpg]


will add when ive got more time
Edited 16-12-2012, 05:49 PM by john wan.
john wan
05-11-2019, 08:11 AM #1

Hi so took me ages to come round to buying an is200 after test driving thought they were slow but awesome inside and out love the aggressive looks love the car just needs mare POOOOOOOOOWERRRRRR

thought id do a thread as ive had plans for a while well since not long after buying the car all will become clear here she is

[Image: IMG-20120406-00386_zpsc4a49ebf.jpg]

so this thread is gonna be a bit bitty as i dont get to be on the pc for great lengths of time.
so the first thing i noticed was that the lexus tends to not be as stiffer ride as im used to i bought was lowering springs as i like cars to be a bit lower

[Image: IMG-20120407-00395_zpsfb6bc637.jpg]

[Image: IMG-20120315-00361.jpg]

[Image: IMG-20120406-00389_zpsb94edd32.jpg]

[Image: IMG-20120406-00391_zpsaf47eab0.jpg]


went for 50mm then got some polyurathaine arb bushes and some washers and made up some pineapples for the rear subframe ,i knew tightening up the subframe helps had locking collars on my s14 helped instantly

[Image: IMG-20120603-00504_zpsa1425f33.jpg]

[Image: IMG-20120603-00507_zps81e774c8.jpg]

[Image: IMG-20120603-00511_zpsf3b230bf.jpg]

also found some solid diff bushes the observant people will see that theres one missing had to make one up out of some ally

[Image: IMG-20120417-00408_zps7f881ac3.jpg]

[Image: IMG-20120708-00575_zps7762161a.jpg]

how they look fitted

[Image: IMG-20120708-00577_zpsa0761bcd.jpg]




also bought a subframe with arms got the arms bead blasted then sprayed them up havnt fitted them yet need to get some polly bushes how they look now

[Image: IMG-20120513-00439_zpsabea00fd.jpg]


will add when ive got more time

Sparkystav
Administrator
14,683
05-11-2019, 09:39 AM
#2
Nice mate. Have you got the dimensions of the rear subframe bushes?

OutlawJapClub Admin Team
Sparkystav
05-11-2019, 09:39 AM #2

Nice mate. Have you got the dimensions of the rear subframe bushes?


OutlawJapClub Admin Team

john wan
Posting Freak
890
05-11-2019, 10:03 AM
#3
The main ones?
john wan
05-11-2019, 10:03 AM #3

The main ones?

Lexuspat
Administrator
6,827
05-11-2019, 10:26 AM
#4
looks pretty good like the plans

[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team
Lexuspat
05-11-2019, 10:26 AM #4

looks pretty good like the plans


[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team

john wan
Posting Freak
890
05-11-2019, 10:28 AM
#5
why thank you got a cheeky t28 to bolt on soon Big Grin
john wan
05-11-2019, 10:28 AM #5

why thank you got a cheeky t28 to bolt on soon Big Grin

Sparkystav
Administrator
14,683
05-11-2019, 10:28 AM
#6
For the pineapples mate

OutlawJapClub Admin Team
Sparkystav
05-11-2019, 10:28 AM #6

For the pineapples mate


OutlawJapClub Admin Team

john wan
Posting Freak
890
05-11-2019, 10:36 AM
#7
well i over ordered on the bigger ones so have spares just need cutting in two.
Biguns are 75mm with 25mm hole and the smaller ones think were 50 or 60mm with 25mm hole
Edited 16-12-2012, 08:10 PM by john wan.
john wan
05-11-2019, 10:36 AM #7

well i over ordered on the bigger ones so have spares just need cutting in two.
Biguns are 75mm with 25mm hole and the smaller ones think were 50 or 60mm with 25mm hole

john wan
Posting Freak
890
09-12-2019, 02:29 AM
#8
So priety much as soon as I got her I realised shes slow this was backed by my mrs laughing at me an telling me this how rude but then she does drive a subaru sti (mine used to be faster) so this was troubling me how do I make my car faster so looked at suppercharger but then thought enitial out lay for one and well ive never owned one put me off also from what I read your limmited on what power you can get from one so decided to go turbo so after looking around for months i decided t 28 turbo from a skyline or t25 would do as there straight 6 to so ended up with one of each turbos but am going to fit the t28 as there supposed to be a better turbo an what small power im going to ask of it it should handle fine so decided hell yeah go ferrit so picked sparky stavs brains and a few outhers an then got the balls to do a fpr with return line was easy in the end that was the start so ive not done the full conversion yet I have a wardrobe
full of bits waiting to go on but sat down an did some of oil and water lines outher night



[Image: 20130117_212728_zps86c80071.jpg]

I also made up and fitted an induction kit this will be gettin stripped an incorporated into the turbo set up

[Image: IMG-20120715-00602_zpsb35ffe13.jpg]

And decided on either a modeo intercooler or saab 900 one so got one of each so the one I dont use will be sold to

[Image: johnsWales2012282.jpg]


Will be making up a oil flow banjo spare as I have a spare one to sell if anyones interested
john wan
09-12-2019, 02:29 AM #8

So priety much as soon as I got her I realised shes slow this was backed by my mrs laughing at me an telling me this how rude but then she does drive a subaru sti (mine used to be faster) so this was troubling me how do I make my car faster so looked at suppercharger but then thought enitial out lay for one and well ive never owned one put me off also from what I read your limmited on what power you can get from one so decided to go turbo so after looking around for months i decided t 28 turbo from a skyline or t25 would do as there straight 6 to so ended up with one of each turbos but am going to fit the t28 as there supposed to be a better turbo an what small power im going to ask of it it should handle fine so decided hell yeah go ferrit so picked sparky stavs brains and a few outhers an then got the balls to do a fpr with return line was easy in the end that was the start so ive not done the full conversion yet I have a wardrobe
full of bits waiting to go on but sat down an did some of oil and water lines outher night



[Image: 20130117_212728_zps86c80071.jpg]

I also made up and fitted an induction kit this will be gettin stripped an incorporated into the turbo set up

[Image: IMG-20120715-00602_zpsb35ffe13.jpg]

And decided on either a modeo intercooler or saab 900 one so got one of each so the one I dont use will be sold to

[Image: johnsWales2012282.jpg]


Will be making up a oil flow banjo spare as I have a spare one to sell if anyones interested

Sparkystav
Administrator
14,683
09-12-2019, 02:50 AM
#9
Nice update mate. when's the actual fitting start?

OutlawJapClub Admin Team
Sparkystav
09-12-2019, 02:50 AM #9

Nice update mate. when's the actual fitting start?


OutlawJapClub Admin Team

john wan
Posting Freak
890
09-12-2019, 09:16 AM
#10
Ha ha ha ha your guess is as good as mine at the mo mate the contract im on at the moment was supposed to finish 3 months ago an im still there so as soon as it finnishes game on am ferkin itchin to get it all fitted
Edited 19-01-2013, 06:51 PM by john wan.
john wan
09-12-2019, 09:16 AM #10

Ha ha ha ha your guess is as good as mine at the mo mate the contract im on at the moment was supposed to finish 3 months ago an im still there so as soon as it finnishes game on am ferkin itchin to get it all fitted

Pages (37): 1 2 3 4 537 Next  
Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 91
Views 5,033
09-04-2024, 01:09 AM
Last Post by Sparkystav
Replies 21
Views 1,258
06-04-2024, 05:57 PM
Last Post by Lexuspat
Replies 30
Views 1,464
04-04-2024, 03:25 PM
Last Post by DannyStock
Replies 1,312
Views 102,647
25-03-2024, 02:10 AM
Last Post by ZAIS200
Replies 194
Views 9,040
23-03-2024, 03:45 PM
Last Post by Wayne
Replies 414
Views 19,982
18-02-2024, 11:42 PM
Last Post by is200turbo
Replies 1,341
Views 67,508
08-02-2024, 01:53 AM
Last Post by Wayne
Replies 4
Views 398
18-12-2023, 02:55 AM
Last Post by Rabster
Replies 20
Views 1,466
08-10-2023, 03:59 AM
Last Post by Wayne
Replies 42
Views 3,098
04-10-2023, 03:52 PM
Last Post by Wayne