Jimbobs Lexus IS200 Turbo!
Jimbobs Lexus IS200 Turbo!
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
02-04-2020, 12:50 AM #792I'd remove the injector maps completely mate the only map you need active is the fuel cut at 4.34v IMHO.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Jimbob-T-Lex
02-04-2020, 01:07 AM #793Ok mate will do could it be that still at 0.4 too much air for the injectors
Ill check tomorrow ****** hard this as its chucking no codes at me aaarrrgggghhhh lol
Jimbob-T-Lex
02-04-2020, 12:40 PM #794right idea im thinking i may have a open circuit in the WOT with the tps or aps as this only happens a WOT could be that when i shorts the 2 pins its not getting the WOT signal and cutting everything
Ill check tomorrow ****** hard this as its chucking no codes at me aaarrrgggghhhh lol
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
02-04-2020, 12:50 PM #795May sound silly but have you recalibrated rated the throttle voltages?
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
I checked the voltage before on the tps and aps before but only the 0.8v at idle so they were in tolerance but didn't check at wot so this could be it!
Jimbob-T-Lex
02-04-2020, 12:54 PM #796What on the old throttle body?? Or in the greddy??
I checked the voltage before on the tps and aps before but only the 0.8v at idle so they were in tolerance but didn't check at wot so this could be it!
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
02-04-2020, 12:56 PM #797On the greddy, you can cal the throttle voltages cant you
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
02-04-2020, 01:07 PM #799What do you mean? It's just a measurement the greddy takes, a reference. You just go to the thottle tab on the setup with the engine off and then it measures the voltage at closed and fully open.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
I beginning to think its todo with throttle body oem one as after it does stall I have to take key out of ignition lock and unlock and it will restart otherwise it won't restart
Jimbob-T-Lex
02-04-2020, 01:16 PM #800Yeah I can get measurements from there but you can also set up manually in the greddy oh I see what you saying mate it just sets parameters for the greddy it's been a long day lol
I beginning to think its todo with throttle body oem one as after it does stall I have to take key out of ignition lock and unlock and it will restart otherwise it won't restart
5 Guest(s)
5 Guest(s)
Views 102,881
Last Post by
Views 405
Last Post by
Views 1,490
Last Post by
Views 6,021
Last Post by
Views 3,139
Last Post by