Jimbobs Lexus IS200 Turbo!
Jimbobs Lexus IS200 Turbo!
![[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]](http://i1227.photobucket.com/albums/ee440/davis5835/Mobile%20Uploads/FB_IMG_1474048273787_zpsnbfq6a3s.jpg)
Before i left i managed to get the exhaust manifold back from the welders, wrap and get refitted so now turbo is fitted again. Just got to fit down pipe and reconnect exhaust bottom end oh and oil return then that is that side of the engine pretty much done bar a water temp sensor for the Link ECU that ill be fitting in the rad where the temp switch used to be. Though parts are all delivered for this now.
![[Image: BBF787FB-59BF-4FB5-AA17-93EC32B3F313_zpsy1jm8quh.jpg]](http://s1197.photobucket.com/user/jimbob150385/media/BBF787FB-59BF-4FB5-AA17-93EC32B3F313_zpsy1jm8quh.jpg.html)
Also started the plug for my engine/Link Ecu loom, i had a plate made up so i could mount the plug where the aircon pipes used to pass through the bulk. wired the back end of the plug so the ecu is ready to be connected just got to do the engine side now
![[Image: D131AEDE-AC06-4E9B-B9EF-36ACBA47C383_zpshet0cgqi.jpg]](http://s1197.photobucket.com/user/jimbob150385/media/D131AEDE-AC06-4E9B-B9EF-36ACBA47C383_zpshet0cgqi.jpg.html)
![[Image: 4DAA4D97-F0BA-41B0-B0D8-C88014AA948A_zpsxjr25qxa.jpg]](http://s1197.photobucket.com/user/jimbob150385/media/4DAA4D97-F0BA-41B0-B0D8-C88014AA948A_zpsxjr25qxa.jpg.html)
![[Image: 0F65EACD-1C0A-42FC-ACB7-63DB8B4D2A74_zpsmiiiyr6u.jpg]](http://s1197.photobucket.com/user/jimbob150385/media/0F65EACD-1C0A-42FC-ACB7-63DB8B4D2A74_zpsmiiiyr6u.jpg.html)
![[Image: 8FB0A395-7F4C-430E-8945-89A222F4AE82_zpsdgjarjks.jpg]](http://s1197.photobucket.com/user/jimbob150385/media/8FB0A395-7F4C-430E-8945-89A222F4AE82_zpsdgjarjks.jpg.html)
![[Image: BC6DBECA-D75B-419C-A2FF-75DB57F66370_zpswvadru56.jpg]](http://s1197.photobucket.com/user/jimbob150385/media/BC6DBECA-D75B-419C-A2FF-75DB57F66370_zpswvadru56.jpg.html)
![[Image: F0BAD2A2-55AD-446B-AC80-5CA737F60400_zpsiwvm6sz3.jpg]](http://s1197.photobucket.com/user/jimbob150385/media/F0BAD2A2-55AD-446B-AC80-5CA737F60400_zpsiwvm6sz3.jpg.html)
Lots more going to be happening in the next 4 days so ill keep this updated
Jimbob-T-Lex
25-03-2021, 11:03 AM #1,064well been at work last three days, ill be back to crack on tomorrow!
Before i left i managed to get the exhaust manifold back from the welders, wrap and get refitted so now turbo is fitted again. Just got to fit down pipe and reconnect exhaust bottom end oh and oil return then that is that side of the engine pretty much done bar a water temp sensor for the Link ECU that ill be fitting in the rad where the temp switch used to be. Though parts are all delivered for this now.
Also started the plug for my engine/Link Ecu loom, i had a plate made up so i could mount the plug where the aircon pipes used to pass through the bulk. wired the back end of the plug so the ecu is ready to be connected just got to do the engine side now
Lots more going to be happening in the next 4 days so ill keep this updated
Jimbob-T-Lex
26-03-2021, 01:17 PM #1,068getting there working hard to get this to mod nats worst case ill have to jump in with my dad in the soarer but fingers crossed all these late nights and full days will pay off!!
Sent from my GT-I9505 using Tapatalk
Jimbob-T-Lex
27-03-2021, 01:15 AM #1,070I'm trying mate pick intake manifold up today so I can drill the vacuum take offs then fit that! Then that allows me to do TPS, injectors, intercooler piping, throttle cable bracket and dip stick bracket! Playing the waiting game at the minute!!!
6 Guest(s)
6 Guest(s)
Views 102,922
Last Post by
Views 405
Last Post by
Views 1,491
Last Post by
Views 6,024
Last Post by
Views 3,144
Last Post by