JapCarForum Cars, Cars, Cars! Project Cars Supercharged Lexus IS200 SE

Supercharged Lexus IS200 SE

Supercharged Lexus IS200 SE

Pages (132): Previous 177 78 79 80 81132 Next  
Lexuspat
Administrator
6,827
12-07-2021, 01:53 PM
Its mounted on a silicone T pipe similar to what u would use for a BOV, but has a custom mount plate that reduces the diameter down to 25mm. Thats it really mate.

Sent from my GT-I9505 using Tapatalk

[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team
Lexuspat
12-07-2021, 01:53 PM #781

Its mounted on a silicone T pipe similar to what u would use for a BOV, but has a custom mount plate that reduces the diameter down to 25mm. Thats it really mate.

Sent from my GT-I9505 using Tapatalk


[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team

Xtremist
Member
194
12-07-2021, 01:57 PM
And where does your vacuum hose come from
Xtremist
12-07-2021, 01:57 PM #782

And where does your vacuum hose come from

Lexuspat
Administrator
6,827
12-07-2021, 02:03 PM
From the only vacuum point on the car under the throttle body,

Theres a line that comes out from the side, u need to T into that and run it to the bypass

Sent from my GT-I9505 using Tapatalk

[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team
Lexuspat
12-07-2021, 02:03 PM #783

From the only vacuum point on the car under the throttle body,

Theres a line that comes out from the side, u need to T into that and run it to the bypass

Sent from my GT-I9505 using Tapatalk


[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team

posty
Senior Member
610
12-07-2021, 02:03 PM
And you need tiny hands to get to it!


Sent from my iPad using Tapatalk
posty
12-07-2021, 02:03 PM #784

And you need tiny hands to get to it!


Sent from my iPad using Tapatalk

Lexuspat
Administrator
6,827
12-07-2021, 02:05 PM
[Image: 20140712_135949_zps1wopuriu.jpg]

This is the only pic I have on my phone of the bypass

Sent from my GT-I9505 using Tapatalk

[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team
Lexuspat
12-07-2021, 02:05 PM #785

[Image: 20140712_135949_zps1wopuriu.jpg]

This is the only pic I have on my phone of the bypass

Sent from my GT-I9505 using Tapatalk


[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team

ZAIS200
Senior Member
741
12-07-2021, 02:42 PM
I've been wanting to see how the bypass fits my next question would be about this clutch that everybody talks about, i'm intrigued to see how this clutch is wired up i'm assuming one wire goes to ignition (as in your case pat) and one to ground as chassis or body, am i correct?

P.s: where or how did you get the 2" pipe fitting for the bypass, the bypasses i've seen on fleabay don't come with them.
Edited 24-08-2014, 12:24 AM by ZAIS200.
ZAIS200
12-07-2021, 02:42 PM #786

I've been wanting to see how the bypass fits my next question would be about this clutch that everybody talks about, i'm intrigued to see how this clutch is wired up i'm assuming one wire goes to ignition (as in your case pat) and one to ground as chassis or body, am i correct?

P.s: where or how did you get the 2" pipe fitting for the bypass, the bypasses i've seen on fleabay don't come with them.

Lexuspat
Administrator
6,827
12-07-2021, 11:36 PM
The pipe for the bypass was made by Fossil Fuels,

All it is is a flat plate with a hole in the middle and then a small length of metal pipe off the one side to attach it.

With regards the clutch Neg runs to the Neg of battery and the Pos rusns to an ignition source in the car, I used the cig lighter

Sent from my GT-I9505 using Tapatalk

[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team
Lexuspat
12-07-2021, 11:36 PM #787

The pipe for the bypass was made by Fossil Fuels,

All it is is a flat plate with a hole in the middle and then a small length of metal pipe off the one side to attach it.

With regards the clutch Neg runs to the Neg of battery and the Pos rusns to an ignition source in the car, I used the cig lighter

Sent from my GT-I9505 using Tapatalk


[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team

Lexuspat
Administrator
6,827
12-07-2021, 11:41 PM
[Image: received_m_mid_1396456469237_6201bd34981...baajq.jpeg]

Heres a pic of the mount for the bypass

Sent from my GT-I9505 using Tapatalk

[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team
Lexuspat
12-07-2021, 11:41 PM #788

[Image: received_m_mid_1396456469237_6201bd34981...baajq.jpeg]

Heres a pic of the mount for the bypass

Sent from my GT-I9505 using Tapatalk


[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team

Xtremist
Member
194
13-07-2021, 02:20 AM
Ah Ok that looks pretty simple to make
Xtremist
13-07-2021, 02:20 AM #789

Ah Ok that looks pretty simple to make

Shack
Junior Member
3
13-07-2021, 02:46 AM
Hey Pat, thanks for the help before. This is an awesome build! loving all the information here mate! Keep us posted with heaps more mods =D
Shack
13-07-2021, 02:46 AM #790

Hey Pat, thanks for the help before. This is an awesome build! loving all the information here mate! Keep us posted with heaps more mods =D

Pages (132): Previous 177 78 79 80 81132 Next  
Recently Browsing
 6 Guest(s)
Recently Browsing
 6 Guest(s)
Related Threads…
Replies 91
Views 5,450
09-04-2024, 01:09 AM
Last Post by Sparkystav
Replies 21
Views 1,410
06-04-2024, 05:57 PM
Last Post by Lexuspat
Replies 194
Views 9,667
23-03-2024, 03:45 PM
Last Post by Wayne
Replies 414
Views 21,316
18-02-2024, 11:42 PM
Last Post by is200turbo
Replies 1,341
Views 71,361
08-02-2024, 01:53 AM
Last Post by Wayne
Replies 4
Views 452
18-12-2023, 02:55 AM
Last Post by Rabster
Replies 20
Views 1,572
08-10-2023, 03:59 AM
Last Post by Wayne
Replies 95
Views 6,308
06-10-2023, 02:58 AM
Last Post by Wayne
Replies 42
Views 3,306
04-10-2023, 03:52 PM
Last Post by Wayne
Replies 76
Views 3,104
30-09-2023, 01:24 AM
Last Post by RichS11