JapCarForum Cars, Cars, Cars! Project Cars Jimbobs Lexus IS200 Turbo!

Jimbobs Lexus IS200 Turbo!

Jimbobs Lexus IS200 Turbo!

Pages (135): Previous 1111 112 113 114 115135 Next  
Lexuspat
Administrator
6,827
25-06-2022, 08:36 AM
Looking good

Sent from my K017 using Tapatalk

[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team
Lexuspat
25-06-2022, 08:36 AM #1,121

Looking good

Sent from my K017 using Tapatalk


[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team

mattlaw
Senior Member
572
25-06-2022, 08:45 AM
Very nice
mattlaw
25-06-2022, 08:45 AM #1,122

Very nice

Sparkystav
Administrator
14,683
27-06-2022, 09:16 AM
Awesome mate

OutlawJapClub Admin Team
Sparkystav
27-06-2022, 09:16 AM #1,123

Awesome mate


OutlawJapClub Admin Team

Tosh21
Member
171
27-06-2022, 09:36 AM
Nice touch with the brace on the wastegate! Been struggling with my PAS cooler, your oil cooler has given me an idea not sure why i never thought of putting it there lol Looking forward to seeing it at JAE
Tosh21
27-06-2022, 09:36 AM #1,124

Nice touch with the brace on the wastegate! Been struggling with my PAS cooler, your oil cooler has given me an idea not sure why i never thought of putting it there lol Looking forward to seeing it at JAE

FOSSIL FUELS
Moderator
892
02-07-2022, 10:50 AM
I really want to have a go on this

[Image: Supra-logo-toyota-supras-119417_1569_512...duxjro.jpg]
Toyota Supra Aero Top... In 202 Black and 18" GOLD & Chrome's with a BGW Wink
OutlawJapClub Admin Team
FOSSIL FUELS
02-07-2022, 10:50 AM #1,125

I really want to have a go on this


[Image: Supra-logo-toyota-supras-119417_1569_512...duxjro.jpg]
Toyota Supra Aero Top... In 202 Black and 18" GOLD & Chrome's with a BGW Wink
OutlawJapClub Admin Team

Jimbob-T-Lex
Moderator
1,674
13-07-2022, 04:24 PM
Well now its time i finally fitted my solid 1G-GTE flywheel order all the bits required so should be able to get done this weekend.

Also weekend just gone i finally fitted my bonnet latches scary stuff when you start hacking at your bonnet.

[Image: CEC1BEFD-C7C5-453C-BE6A-1FB44F9C4D5D_zpsiudogmnn.jpg]

[Image: FB4863A1-C6D1-43E6-8C86-E3588F84F01A_zpsyqnjlnrp.jpg]

[Image: 286100CB-29EA-46EC-B0A4-CA571FD11A15_zpsfq2yjyxs.jpg]
Jimbob-T-Lex
13-07-2022, 04:24 PM #1,126

Well now its time i finally fitted my solid 1G-GTE flywheel order all the bits required so should be able to get done this weekend.

Also weekend just gone i finally fitted my bonnet latches scary stuff when you start hacking at your bonnet.

[Image: CEC1BEFD-C7C5-453C-BE6A-1FB44F9C4D5D_zpsiudogmnn.jpg]

[Image: FB4863A1-C6D1-43E6-8C86-E3588F84F01A_zpsyqnjlnrp.jpg]

[Image: 286100CB-29EA-46EC-B0A4-CA571FD11A15_zpsfq2yjyxs.jpg]

FOSSIL FUELS
Moderator
892
14-07-2022, 12:31 AM
Looks really tidy.

Really good job buddy... want to do mine Wink been putting it off for months

[Image: Supra-logo-toyota-supras-119417_1569_512...duxjro.jpg]
Toyota Supra Aero Top... In 202 Black and 18" GOLD & Chrome's with a BGW Wink
OutlawJapClub Admin Team
FOSSIL FUELS
14-07-2022, 12:31 AM #1,127

Looks really tidy.

Really good job buddy... want to do mine Wink been putting it off for months


[Image: Supra-logo-toyota-supras-119417_1569_512...duxjro.jpg]
Toyota Supra Aero Top... In 202 Black and 18" GOLD & Chrome's with a BGW Wink
OutlawJapClub Admin Team

Jimbob-T-Lex
Moderator
1,674
02-12-2022, 11:25 AM
Well a little update as i have been slacking on working on the car!!!

Been having a weird noise from the gearbox/clutch for a few months so i finally fitted my solid 1ggte flywheel and new clutch and rebuilt. Unfortunately the noise was still there.

This then led me to believe maybe it was my gearbox so Santa got me a one!!! lmao

Just stripped it all down again and doing a few other jobs along the way. Then hit me spigot bearing!!!!!! had a look and low and behold it was knackered!!! So i have ordered a new one and is on its way to me now thanks to MattLaw.

Took sump off as there was a small leak so i can redo that while gearbox is off.

Noticed that the front crank case oil seal is leaking slightly from when i had the crank case pressure so will need to address this!!

Will be fitting my new LSD just wire brushing and painting before i fit that.

Fitting all new ball joints and my LS400 front brakes

TRD short shifter when i pick up from pats .

Also there is a few modifications i shall not be giving away just yet!

Pictures will follow tomorrow
Jimbob-T-Lex
02-12-2022, 11:25 AM #1,128

Well a little update as i have been slacking on working on the car!!!

Been having a weird noise from the gearbox/clutch for a few months so i finally fitted my solid 1ggte flywheel and new clutch and rebuilt. Unfortunately the noise was still there.

This then led me to believe maybe it was my gearbox so Santa got me a one!!! lmao

Just stripped it all down again and doing a few other jobs along the way. Then hit me spigot bearing!!!!!! had a look and low and behold it was knackered!!! So i have ordered a new one and is on its way to me now thanks to MattLaw.

Took sump off as there was a small leak so i can redo that while gearbox is off.

Noticed that the front crank case oil seal is leaking slightly from when i had the crank case pressure so will need to address this!!

Will be fitting my new LSD just wire brushing and painting before i fit that.

Fitting all new ball joints and my LS400 front brakes

TRD short shifter when i pick up from pats .

Also there is a few modifications i shall not be giving away just yet!

Pictures will follow tomorrow

john wan
Posting Freak
890
02-12-2022, 12:05 PM
What do you have to do to fit them breaks mate?
john wan
02-12-2022, 12:05 PM #1,129

What do you have to do to fit them breaks mate?

Sparkystav
Administrator
14,683
02-12-2022, 02:00 PM
You have to get the figs adapters same as the supra brakes mate, and then either shave a little off the bottom of the caliper, or run Rca spacers so you don't hit the steering arm

OutlawJapClub Admin Team
Sparkystav
02-12-2022, 02:00 PM #1,130

You have to get the figs adapters same as the supra brakes mate, and then either shave a little off the bottom of the caliper, or run Rca spacers so you don't hit the steering arm


OutlawJapClub Admin Team

Pages (135): Previous 1111 112 113 114 115135 Next  
Recently Browsing
 6 Guest(s)
Recently Browsing
 6 Guest(s)
Related Threads…
Replies 91
Views 5,140
09-04-2024, 01:09 AM
Last Post by Sparkystav
Replies 21
Views 1,292
06-04-2024, 05:57 PM
Last Post by Lexuspat
Replies 1,312
Views 102,956
25-03-2024, 02:10 AM
Last Post by ZAIS200
Replies 194
Views 9,104
23-03-2024, 03:45 PM
Last Post by Wayne
Replies 414
Views 20,439
18-02-2024, 11:42 PM
Last Post by is200turbo
Replies 4
Views 405
18-12-2023, 02:55 AM
Last Post by Rabster
Replies 20
Views 1,491
08-10-2023, 03:59 AM
Last Post by Wayne
Replies 95
Views 6,024
06-10-2023, 02:58 AM
Last Post by Wayne
Replies 42
Views 3,144
04-10-2023, 03:52 PM
Last Post by Wayne
Replies 76
Views 2,822
30-09-2023, 01:24 AM
Last Post by RichS11