My little project - IS200 Turbo
My little project - IS200 Turbo
31-08-2016, 05:26 AM
SPC Horsham will be taking the cylinder head and block, so that they can do some comparisons with the 1G-FE and see where the 1G-GTE is stronger etc (if at all ?).
Gord has been into Charlesworth today and has taken a couple of pics of the internals, so hopefully he'll get a chance to post them up at some point (thanks Gord :thumbup1
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
31-08-2016, 05:26 AM #193Well I'll certainly be trying to put the bits to good use !
SPC Horsham will be taking the cylinder head and block, so that they can do some comparisons with the 1G-FE and see where the 1G-GTE is stronger etc (if at all ?).
Gord has been into Charlesworth today and has taken a couple of pics of the internals, so hopefully he'll get a chance to post them up at some point (thanks Gord :thumbup1
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
31-08-2016, 05:40 AM
steviewevie SPC Horsham will be taking the cylinder head and block, so that they can do some comparisons with the 1G-FE and see where the 1G-GTE is stronger etc (if at all ?).
I'd expect them to be very different. Toyota engines undergo some pretty mega revisions over their production lifetime and the 1G has been around for ages! You can put a 3S block from a 1986 Celica next to a 3S block from a 2007 Caldina and they look nothing like each other! Revised water pump housings, oil cooler & filter changes, etc. The heads are totally different as are the water jackets.
The heads in your case will obviously be totally different as one is -F and one is -G so the valve angles, valves themselves etc will all be different.
I think their findings will be interesting :thumbup1:
steviewevie SPC Horsham will be taking the cylinder head and block, so that they can do some comparisons with the 1G-FE and see where the 1G-GTE is stronger etc (if at all ?).
I'd expect them to be very different. Toyota engines undergo some pretty mega revisions over their production lifetime and the 1G has been around for ages! You can put a 3S block from a 1986 Celica next to a 3S block from a 2007 Caldina and they look nothing like each other! Revised water pump housings, oil cooler & filter changes, etc. The heads are totally different as are the water jackets.
The heads in your case will obviously be totally different as one is -F and one is -G so the valve angles, valves themselves etc will all be different.
I think their findings will be interesting :thumbup1:
31-08-2016, 05:48 AM
SPC Horsham have their own upgraded head for the 1G-FE (which Almost Finished has on his car), so I'm sure they'll be interested to see what Toyota did in the GTE head, as well as the block differences.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
31-08-2016, 05:48 AM #196Yeah it'll be interesting alright. I did have my tongue in my cheek when I said "if at all" about the differences, I'm sure they will be different. The 1G-GTE is reputed to be able to take a *lot* more power than the 1G-FE.
SPC Horsham have their own upgraded head for the 1G-FE (which Almost Finished has on his car), so I'm sure they'll be interested to see what Toyota did in the GTE head, as well as the block differences.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
31-08-2016, 06:18 AM
On a serious note glad to see everything is going well (so far anyways) can't wait to see the pics from Gord
My Garage
Supra Build Thread
' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
Dan_Turism0
31-08-2016, 06:18 AM #198from this day forward the is200 engine shall be known as the 1G-tof(FE)e
On a serious note glad to see everything is going well (so far anyways) can't wait to see the pics from Gord
My Garage
Supra Build Thread
' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
31-08-2016, 06:37 AM
toxo Do you know if they were Yamaha designed heads like the 3S? I know there are some other Toyota engines that went that way to be played withI don't think so, but I could be wrong.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
31-08-2016, 06:37 AM #199toxo Do you know if they were Yamaha designed heads like the 3S? I know there are some other Toyota engines that went that way to be played withI don't think so, but I could be wrong.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
Recently Browsing
6 Guest(s)
6 Guest(s)
Recently Browsing
6 Guest(s)
6 Guest(s)
Related Threads…
Replies 1,312
Views 103,015
Views 103,015
25-03-2024, 02:10 AM
Last Post byZAIS200
Last Post by
Replies 1,341
Views 68,844
Views 68,844
08-02-2024, 01:53 AM
Last Post byWayne
Last Post by
Replies 4
Views 405
Views 405
18-12-2023, 02:55 AM
Last Post byRabster
Last Post by
Replies 20
Views 1,491
Views 1,491
08-10-2023, 03:59 AM
Last Post byWayne
Last Post by
Replies 42
Views 3,144
Views 3,144
04-10-2023, 03:52 PM
Last Post byWayne
Last Post by