My IS-V8-Turbo
My IS-V8-Turbo
I started my Conversion on my IS200 over 2 yearsago to put the 4L V8 1UZ-FE thats in the Lexus LS400
The Engine has done 120,000 miles but then so has my IS200, so i dont only have the engine i have the rest of the car as well to get some bits off. as its been done before........
as for the ECU.........I will be useing the IS & LS ECU,s for now just to get it running but next year i will be puting the LinksPlus standalone....ECU in the IS
as for fueling, i will be keeping the std njectors for now. i have all so run new lines from the tank to FPR to fuel rails & return lines
dont think i will have to mod the sump like on most Conversion,s on the IS as the sump on the 1UZ-FE sits at the front of the engine so it should fit over the cross member on the IS,
the good thing about this swap is that the 1UZ is an all aluminum construction that makes it just as light as the 1G-FE + The Rods are factory forged units, + it has factory forged crank as well.
..............some more info to come & pic,s as well
Marcus_1UZ
18-05-2016, 10:08 AM #1Hi guys, some of you will know about the swap im doing and some will not, for you that dont know i have put a 1UZ-FE V8 Engine into my IS200.
I started my Conversion on my IS200 over 2 yearsago to put the 4L V8 1UZ-FE thats in the Lexus LS400
The Engine has done 120,000 miles but then so has my IS200, so i dont only have the engine i have the rest of the car as well to get some bits off. as its been done before........
as for the ECU.........I will be useing the IS & LS ECU,s for now just to get it running but next year i will be puting the LinksPlus standalone....ECU in the IS
as for fueling, i will be keeping the std njectors for now. i have all so run new lines from the tank to FPR to fuel rails & return lines
dont think i will have to mod the sump like on most Conversion,s on the IS as the sump on the 1UZ-FE sits at the front of the engine so it should fit over the cross member on the IS,
the good thing about this swap is that the 1UZ is an all aluminum construction that makes it just as light as the 1G-FE + The Rods are factory forged units, + it has factory forged crank as well.
..............some more info to come & pic,s as well
![[Image: myv8No2006.jpg]](http://i482.photobucket.com/albums/rr189/V8marcus/myv8No2006.jpg)
![[Image: myv8No2008.jpg]](http://i482.photobucket.com/albums/rr189/V8marcus/myv8No2008.jpg)
![[Image: MyV8004-1.jpg]](http://i482.photobucket.com/albums/rr189/V8marcus/MyV8004-1.jpg)
![[Image: MyV8009-1.jpg]](http://i482.photobucket.com/albums/rr189/V8marcus/MyV8009-1.jpg)
![[Image: d610zsDH9E7vNrbqMEomOYFLVHdsiPZxq1y.jpg]](http://i482.photobucket.com/albums/rr189/V8marcus/d610zsDH9E7vNrbqMEomOYFLVHdsiPZxq1y.jpg)
well as most of you know, i did the wireing 3 weeks ago and she started for the 1st time about 3/4 days later, im hopeing to have the car back on the road in about 2 to 3 weeks, as there is still some things that need doing, but the hard work is all out the way now....
Marcus_1UZ
18-05-2016, 10:47 AM #3Here you go some pic,s of the swap......
well as most of you know, i did the wireing 3 weeks ago and she started for the 1st time about 3/4 days later, im hopeing to have the car back on the road in about 2 to 3 weeks, as there is still some things that need doing, but the hard work is all out the way now....
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
18-05-2016, 11:04 AM #4Looking awesome Marcus ! :w00t:
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie Looking awesome Marcus ! :w00t:
Thanks mate
I got a set of DBA,s Gold to put on her, they are the ones i got of Ellz on LOC, i repainted them Gold and they are like new! now :p
Marcus_1UZ
18-05-2016, 11:16 AM #5steviewevie Looking awesome Marcus ! :w00t:
Thanks mate
I got a set of DBA,s Gold to put on her, they are the ones i got of Ellz on LOC, i repainted them Gold and they are like new! now :p
DJ Wozza Looking wicked Marcus, well done mate, a major acheivement.
Thanks mate,
Marcus_1UZ
18-05-2016, 12:13 PM #6DJ Wozza Looking wicked Marcus, well done mate, a major acheivement.
Thanks mate,
Aztecbandit1 Looking great mate, i think JAE will be pretty interesting this year with all the engine swaps that have gone on in the past year
Thanks mate
yea it should be fun this year, can not wait for the drive up :lol::lol:
Marcus_1UZ
18-05-2016, 12:59 PM #8Aztecbandit1 Looking great mate, i think JAE will be pretty interesting this year with all the engine swaps that have gone on in the past year
Thanks mate
yea it should be fun this year, can not wait for the drive up :lol::lol:
Marcus_1UZ Thanks mate
Yeh same here mate, its a bit more fun now that i have a skyline :w00t:
Was just looking at the pic of your car when it was the same colour as my old one and still think its a great looking lex that :thumbup:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Marcus_1UZ Thanks mate
Yeh same here mate, its a bit more fun now that i have a skyline :w00t:
Was just looking at the pic of your car when it was the same colour as my old one and still think its a great looking lex that :thumbup:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
I have just got my hose,s for the Rad! i can now connect that up at long last..... I took my turbo houseing to a HotRod place last week, to have a pipe welded to the outlet! so when its fitted the hose will not hit the manifold, i got a call tonight from the HotRod place and its all done :drool: but the only time i can get over to pick it up is next week, just 1 or 2 things to do now, 1 or 2 weeks away from puting her back on the road
neaky2:
Marcus_1UZ
21-05-2016, 11:53 AM #10UPDATE!!!
I have just got my hose,s for the Rad! i can now connect that up at long last..... I took my turbo houseing to a HotRod place last week, to have a pipe welded to the outlet! so when its fitted the hose will not hit the manifold, i got a call tonight from the HotRod place and its all done :drool: but the only time i can get over to pick it up is next week, just 1 or 2 things to do now, 1 or 2 weeks away from puting her back on the road neaky2:
1 Guest(s)
1 Guest(s)
Views 67,510
Last Post by
Views 1,419
Last Post by
Views 4,895
Last Post by
Views 3,902
Last Post by
Views 12,873
Last Post by
Views 3,369
Last Post by
Views 86,258
Last Post by
Views 2,117
Last Post by