JapCarForum Cars, Cars, Cars! Project Cars My IS-V8-Turbo

My IS-V8-Turbo

My IS-V8-Turbo

Pages (53): Previous 1 2 3 4 553 Next  
steviewevie
Posting Freak
7,993
21-05-2016, 11:58 AM
#11
Good stuff Marcus, making progress all the time :thumbup1:

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
21-05-2016, 11:58 AM #11

Good stuff Marcus, making progress all the time :thumbup1:


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

Marcus_1UZ
Senior Member
511
21-05-2016, 12:19 PM
#12
steviewevie Good stuff Marcus, making progress all the time :thumbup1:

Thanks mate Smile

I also have a very nice set of DBA Golds to go on here thanks to Ellz Smile
The car will be MATT Black for this year, and then im going back to the colour she was before i started the swap:drool: but one or 2 things will not be the same, but you will all have to wait and see what that is :w00t:
Marcus_1UZ
21-05-2016, 12:19 PM #12

steviewevie Good stuff Marcus, making progress all the time :thumbup1:

Thanks mate Smile

I also have a very nice set of DBA Golds to go on here thanks to Ellz Smile
The car will be MATT Black for this year, and then im going back to the colour she was before i started the swap:drool: but one or 2 things will not be the same, but you will all have to wait and see what that is :w00t:

Saraj
Posting Freak
2,791
21-05-2016, 12:21 PM
#13
so you doing a full spray to black and then back again?

how is that costing you.

its nice to see alot of people taking time with there cars, keep us updated

[COLOR="Gray"]December 2008: Crashed Lexus IS200 - Cat B Write Off
August 2009: Crashed Vauxhall Astra - Minor Damage DIY Repair
November 2009: Crashed Vauxhall Astra - Scratches To Bumper No Repair Required
February 2010: Other Party Crashed Into Astra - Extensive Damage To Rear -Settled With Third Party's Insurance
Anyone dare To Predict The Future?[/COLOR]
Saraj
21-05-2016, 12:21 PM #13

so you doing a full spray to black and then back again?

how is that costing you.

its nice to see alot of people taking time with there cars, keep us updated


[COLOR="Gray"]December 2008: Crashed Lexus IS200 - Cat B Write Off
August 2009: Crashed Vauxhall Astra - Minor Damage DIY Repair
November 2009: Crashed Vauxhall Astra - Scratches To Bumper No Repair Required
February 2010: Other Party Crashed Into Astra - Extensive Damage To Rear -Settled With Third Party's Insurance
Anyone dare To Predict The Future?[/COLOR]

Marcus_1UZ
Senior Member
511
21-05-2016, 12:28 PM
#14
Saraj so you doing a full spray to black and then back again?

how is that costing you.

its nice to see alot of people taking time with there cars, keep us updated

Hi Saraj, well the car is black base right now!! but i was going to have it ( hi-gloss black) but it was working out to much to get the top coat done, so now im going to do it matt black, and by doing so i can then do it Smile and all its going to cost me is the paint. as i have all the tools any way... and this way it will give me alot of time to save up for a full spray next year Smile
Marcus_1UZ
21-05-2016, 12:28 PM #14

Saraj so you doing a full spray to black and then back again?

how is that costing you.

its nice to see alot of people taking time with there cars, keep us updated

Hi Saraj, well the car is black base right now!! but i was going to have it ( hi-gloss black) but it was working out to much to get the top coat done, so now im going to do it matt black, and by doing so i can then do it Smile and all its going to cost me is the paint. as i have all the tools any way... and this way it will give me alot of time to save up for a full spray next year Smile

Marcus_1UZ
Senior Member
511
24-05-2016, 02:08 PM
#15
OK DBA,s Golds are on the car, and the Rad hose,s are all connected up, now i have to try and get mt RPM working, have to have alook and see what wire i need!!
Marcus_1UZ
24-05-2016, 02:08 PM #15

OK DBA,s Golds are on the car, and the Rad hose,s are all connected up, now i have to try and get mt RPM working, have to have alook and see what wire i need!!

Bandit
Posting Freak
6,464
24-05-2016, 02:12 PM
#16
Cool mate, getting there steadily now and hopefully wont be long till you can give a good test drive :thumbup:

Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!
Bandit
24-05-2016, 02:12 PM #16

Cool mate, getting there steadily now and hopefully wont be long till you can give a good test drive :thumbup:


Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!

steviewevie
Posting Freak
7,993
24-05-2016, 09:40 PM
#17
Keep up the good work Marcus ! :biggrin:

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
24-05-2016, 09:40 PM #17

Keep up the good work Marcus ! :biggrin:


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

dimis
Posting Freak
3,795
24-05-2016, 10:51 PM
#18
Nice work and interesting project you are having there. Keep up the good work.

LEXUS IS200 - The most fun car to go sideways
dimis
24-05-2016, 10:51 PM #18

Nice work and interesting project you are having there. Keep up the good work.


LEXUS IS200 - The most fun car to go sideways

Asi
Posting Freak
2,510
26-05-2016, 05:39 AM
#19
looking good mate.
Asi
26-05-2016, 05:39 AM #19

looking good mate.

Marcus_1UZ
Senior Member
511
26-05-2016, 01:38 PM
#20
Marcus_1UZ UPDATE!!!

I have just got my hose,s for the Rad! i can now connect that up at long last..... I took my turbo houseing to a HotRod place last week, to have a pipe welded to the outlet! so when its fitted the hose will not hit the manifold, i got a call tonight from the HotRod place and its all done :drool: but the only time i can get over to pick it up is next week, just 1 or 2 things to do now, 1 or 2 weeks away from puting her back on the road Confusedneaky2:

Well i got mt turbo houseing back today, very nice i have to say, top job the guy that welded it, now i can get that put back on the car over the weekend, and then i can start connecting me intercooler pipes :biggrin:, and the HKS BOV that i have for the car.
Marcus_1UZ
26-05-2016, 01:38 PM #20

Marcus_1UZ UPDATE!!!

I have just got my hose,s for the Rad! i can now connect that up at long last..... I took my turbo houseing to a HotRod place last week, to have a pipe welded to the outlet! so when its fitted the hose will not hit the manifold, i got a call tonight from the HotRod place and its all done :drool: but the only time i can get over to pick it up is next week, just 1 or 2 things to do now, 1 or 2 weeks away from puting her back on the road Confusedneaky2:

Well i got mt turbo houseing back today, very nice i have to say, top job the guy that welded it, now i can get that put back on the car over the weekend, and then i can start connecting me intercooler pipes :biggrin:, and the HKS BOV that i have for the car.

Pages (53): Previous 1 2 3 4 553 Next  
Recently Browsing
 2 Guest(s)
Recently Browsing
 2 Guest(s)
Related Threads…
Replies 1,341
Views 67,675
08-02-2024, 01:53 AM
Last Post by Wayne
Replies 23
Views 1,429
04-01-2023, 03:30 PM
Last Post by aaron1991ellis
Replies 65
Views 4,904
21-12-2022, 09:37 AM
Last Post by jeffrosie
Replies 179
Views 13,976
17-12-2022, 10:34 AM
Last Post by phaebo
Replies 39
Views 3,909
13-12-2022, 01:00 PM
Last Post by N15_GTi
Replies 69
Views 12,925
25-11-2022, 04:48 AM
Last Post by Rabster
Replies 28
Views 3,400
30-07-2022, 06:45 PM
Last Post by Lexus RS200T
Replies 1,318
Views 86,362
05-06-2022, 08:23 AM
Last Post by sarah0
Replies 9
Views 3,722
11-11-2021, 01:10 AM
Last Post by Rabster
Replies 6
Views 2,130
20-06-2021, 04:50 AM
Last Post by Sparkystav