JapCarForum Cars, Cars, Cars! Project Cars My little project - IS200 Turbo

My little project - IS200 Turbo

My little project - IS200 Turbo

Pages (132): Previous 147 48 49 50 51132 Next  
steviewevie
Posting Freak
7,993
24-12-2016, 02:03 AM
Latest is that my turbo and manifold are with a guy who is making the main part of the downpipe. The plan is that tomorrow (Friday) he is bringing that back to Charlesworth, it will all be fitted back to my car, then they will measure and weld on remaining parts to make it bypass the steering rack (which is kinda in the way).

They're still hoping to take it over to Noble on Saturday morning, so it can be mapped.

The main focus of the mapping will be on driveability, rather than top-end bhp. I would rather sacrifice some of the top-end bhp if it will make it nicer to drive in the mid-range.

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
24-12-2016, 02:03 AM #481

Latest is that my turbo and manifold are with a guy who is making the main part of the downpipe. The plan is that tomorrow (Friday) he is bringing that back to Charlesworth, it will all be fitted back to my car, then they will measure and weld on remaining parts to make it bypass the steering rack (which is kinda in the way).

They're still hoping to take it over to Noble on Saturday morning, so it can be mapped.

The main focus of the mapping will be on driveability, rather than top-end bhp. I would rather sacrifice some of the top-end bhp if it will make it nicer to drive in the mid-range.


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

Dan_Turism0
Posting Freak
2,825
24-12-2016, 02:06 AM
awesome steve Smile good to hear mate hope things are sorted for Sat

My Garage
Supra Build Thread

' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
Dan_Turism0
24-12-2016, 02:06 AM #482

awesome steve Smile good to hear mate hope things are sorted for Sat


My Garage
Supra Build Thread

' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.

FirebirdPhil
Posting Freak
7,101
24-12-2016, 03:08 AM
To be fair I would expect at least 350-380BHP with a conservative map considering what you have done to the internals.

We should have a sweep stake with who guesses the correct BHP on the finished project, winner gets some club merchandise?????????

"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
24-12-2016, 03:08 AM #483

To be fair I would expect at least 350-380BHP with a conservative map considering what you have done to the internals.

We should have a sweep stake with who guesses the correct BHP on the finished project, winner gets some club merchandise?????????


"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"

steviewevie
Posting Freak
7,993
24-12-2016, 03:11 AM
2tongues To be fair I would expect at least 350-380BHP with a conservative map considering what you have done to the internals.

My turbo isn't rated for that sort of power though. Yes, the engine should be capable of that, but top-end bhp isn't what I'm after.

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
24-12-2016, 03:11 AM #484

2tongues To be fair I would expect at least 350-380BHP with a conservative map considering what you have done to the internals.

My turbo isn't rated for that sort of power though. Yes, the engine should be capable of that, but top-end bhp isn't what I'm after.


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

toxo
Posting Freak
4,843
24-12-2016, 09:13 AM
Marsdendean Does top end BHP come with all the power in one go.

The 2 aren't mutually exclusive, for example Honda's VTEC engines have maximum output at (or very close to) their redline figures, but on turbo cars the 2 can quite often go together. There are other factors (like whether your boost tails off at higher revs, the design of the turbo itself, progressive boost control, etc).

Marsdendean Would it be possible to have a changeable map via a switch? I remember Revo did one for the Leon, where you could change i t 1 - 5 depending how you wanted to drive

Depends on the ECU and boost control really. I know on the Link and Solaris ECU's with the boost control module you can do that. I don't see why other standalone ECUs wouldn't be the same. If you're doing that on a standalone boost controller then it's more of a balancing act - the ECU needs to be able to cope with 'unexpected' boost by having maps that extend to your maximum boost setting but conversely still needs to make driveable power on lower boost. Because the ECU and boost controller don't talk to each other one needs to be able to react to changes the other makes by analysing what the engine's doing.
Edited 04-02-2010, 06:51 PM by toxo.
toxo
24-12-2016, 09:13 AM #485

Marsdendean Does top end BHP come with all the power in one go.

The 2 aren't mutually exclusive, for example Honda's VTEC engines have maximum output at (or very close to) their redline figures, but on turbo cars the 2 can quite often go together. There are other factors (like whether your boost tails off at higher revs, the design of the turbo itself, progressive boost control, etc).

Marsdendean Would it be possible to have a changeable map via a switch? I remember Revo did one for the Leon, where you could change i t 1 - 5 depending how you wanted to drive

Depends on the ECU and boost control really. I know on the Link and Solaris ECU's with the boost control module you can do that. I don't see why other standalone ECUs wouldn't be the same. If you're doing that on a standalone boost controller then it's more of a balancing act - the ECU needs to be able to cope with 'unexpected' boost by having maps that extend to your maximum boost setting but conversely still needs to make driveable power on lower boost. Because the ECU and boost controller don't talk to each other one needs to be able to react to changes the other makes by analysing what the engine's doing.

FirebirdPhil
Posting Freak
7,101
24-12-2016, 09:15 AM
No top end BHP on a petrol car isn't all in one go, it is gradual but with the IS200's close ratio 'box it feels like its all in one go!!

"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
24-12-2016, 09:15 AM #486

No top end BHP on a petrol car isn't all in one go, it is gradual but with the IS200's close ratio 'box it feels like its all in one go!!


"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"

FirebirdPhil
Posting Freak
7,101
24-12-2016, 09:18 AM
Must be because the MR2's boost is certainly not all in one go.

Mine is very lively between 4500 and 5200rpm:w00t:

"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
24-12-2016, 09:18 AM #487

Must be because the MR2's boost is certainly not all in one go.

Mine is very lively between 4500 and 5200rpm:w00t:


"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"

toxo
Posting Freak
4,843
24-12-2016, 09:18 AM
Marsdendean Fair enough. I know the Evo's feel like its all in one go aswell (down to the close ratio box im guessing!)

They are probably engineered to do that to increase the driver's feeling of 'power'. A lot of cars with VVTI (or oldskool variable length inlet tracts, and some with forced induction) either retard the ignition just before the increase in power, or advance it just after to add to the effect. Toyota do that a lot Smile
Edited 04-02-2010, 06:56 PM by toxo.
toxo
24-12-2016, 09:18 AM #488

Marsdendean Fair enough. I know the Evo's feel like its all in one go aswell (down to the close ratio box im guessing!)

They are probably engineered to do that to increase the driver's feeling of 'power'. A lot of cars with VVTI (or oldskool variable length inlet tracts, and some with forced induction) either retard the ignition just before the increase in power, or advance it just after to add to the effect. Toyota do that a lot Smile

Asi
Posting Freak
2,510
24-12-2016, 09:19 AM
so Ian when you putting up videos?

[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]
Asi
24-12-2016, 09:19 AM #489

so Ian when you putting up videos?


[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]

FirebirdPhil
Posting Freak
7,101
24-12-2016, 09:20 AM
When you call me by my correct name:Bazza:

"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
24-12-2016, 09:20 AM #490

When you call me by my correct name:Bazza:


"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"

Pages (132): Previous 147 48 49 50 51132 Next  
Recently Browsing
 12 Guest(s)
Recently Browsing
 12 Guest(s)
Related Threads…
Replies 91
Views 5,134
09-04-2024, 01:09 AM
Last Post by Sparkystav
Replies 21
Views 1,292
06-04-2024, 05:57 PM
Last Post by Lexuspat
Replies 30
Views 1,546
04-04-2024, 03:25 PM
Last Post by DannyStock
Replies 1,312
Views 102,889
25-03-2024, 02:10 AM
Last Post by ZAIS200
Replies 194
Views 9,102
23-03-2024, 03:45 PM
Last Post by Wayne
Replies 414
Views 20,405
18-02-2024, 11:42 PM
Last Post by is200turbo
Replies 1,341
Views 68,485
08-02-2024, 01:53 AM
Last Post by Wayne
Replies 4
Views 405
18-12-2023, 02:55 AM
Last Post by Rabster
Replies 20
Views 1,491
08-10-2023, 03:59 AM
Last Post by Wayne
Replies 42
Views 3,143
04-10-2023, 03:52 PM
Last Post by Wayne