JapCarForum Cars, Cars, Cars! Project Cars My little project - IS200 Turbo

My little project - IS200 Turbo

My little project - IS200 Turbo

Pages (132): Previous 148 49 50 51 52132 Next  
Sparkystav
Administrator
14,683
24-12-2016, 09:42 AM
you can put different maps into the emanage ultimate, but only two i think?

you change them with 4 dip switches on the side of the ecu

OutlawJapClub Admin Team
Sparkystav
24-12-2016, 09:42 AM #491

you can put different maps into the emanage ultimate, but only two i think?

you change them with 4 dip switches on the side of the ecu


OutlawJapClub Admin Team

toxo
Posting Freak
4,843
24-12-2016, 09:58 AM
Pretty sure you have to change the emanage with the engine off too which is not too helpful!
toxo
24-12-2016, 09:58 AM #492

Pretty sure you have to change the emanage with the engine off too which is not too helpful!

steviewevie
Posting Freak
7,993
24-12-2016, 10:19 AM
Marsdendean Does top end BHP come with all the power in one go.

The turbo that I've picked will be the main influence on the bhp etc. But even so, the timing and fuelling etc can be changed to influence how and when the power comes in, to a certain degree.

Quote:Would it be possible to have a changeable map via a switch? I remember Revo did one for the Leon, where you could change i t 1 - 5 depending how you wanted to drive

As the other guys have said, you can have two maps on the e-Manage Ultimate, e.g. you could have a "race" map and a "street" map. I'm not bothered about that though for myself, and I haven't asked for that to be set up.
Edited 04-02-2010, 08:09 PM by steviewevie.

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
24-12-2016, 10:19 AM #493

Marsdendean Does top end BHP come with all the power in one go.

The turbo that I've picked will be the main influence on the bhp etc. But even so, the timing and fuelling etc can be changed to influence how and when the power comes in, to a certain degree.

Quote:Would it be possible to have a changeable map via a switch? I remember Revo did one for the Leon, where you could change i t 1 - 5 depending how you wanted to drive

As the other guys have said, you can have two maps on the e-Manage Ultimate, e.g. you could have a "race" map and a "street" map. I'm not bothered about that though for myself, and I haven't asked for that to be set up.


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

Bandit
Posting Freak
6,464
01-01-2017, 02:20 AM
Any more news on your motor Steve? :biggrin:

Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!
Bandit
01-01-2017, 02:20 AM #494

Any more news on your motor Steve? :biggrin:


Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!

steviewevie
Posting Freak
7,993
01-01-2017, 02:51 AM
We've been waiting for the guy who's making up the downpipe, nothing really has happened apart from that. He's *supposed* to be taking the part-finished downpipe to Charlesworth today, and finishing it off in-place on my car. I will give them a call later and find out if it's happened !

Once the downpipe is on then they can connect up everything else, fire it up, and take it off to Noble for mapping.

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
01-01-2017, 02:51 AM #495

We've been waiting for the guy who's making up the downpipe, nothing really has happened apart from that. He's *supposed* to be taking the part-finished downpipe to Charlesworth today, and finishing it off in-place on my car. I will give them a call later and find out if it's happened !

Once the downpipe is on then they can connect up everything else, fire it up, and take it off to Noble for mapping.


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

Bandit
Posting Freak
6,464
01-01-2017, 04:41 AM
steviewevie We've been waiting for the guy who's making up the downpipe, nothing really has happened apart from that. He's *supposed* to be taking the part-finished downpipe to Charlesworth today, and finishing it off in-place on my car. I will give them a call later and find out if it's happened !

Once the downpipe is on then they can connect up everything else, fire it up, and take it off to Noble for mapping.

Very good mate, hopefully not much longer to wait now? Bet you can't wait to get back in a Lex :thumbup1:

Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!
Bandit
01-01-2017, 04:41 AM #496

steviewevie We've been waiting for the guy who's making up the downpipe, nothing really has happened apart from that. He's *supposed* to be taking the part-finished downpipe to Charlesworth today, and finishing it off in-place on my car. I will give them a call later and find out if it's happened !

Once the downpipe is on then they can connect up everything else, fire it up, and take it off to Noble for mapping.

Very good mate, hopefully not much longer to wait now? Bet you can't wait to get back in a Lex :thumbup1:


Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!

Anees
Posting Freak
902
01-01-2017, 04:46 AM
Gord and I were talking about your car last night actually. He was saying what a good sensible way to go it is to have a small fast spooling turbo like on yours - should be lovely to drive when done :thumbup:

[Image: clubbanner.gif]
Anees
01-01-2017, 04:46 AM #497

Gord and I were talking about your car last night actually. He was saying what a good sensible way to go it is to have a small fast spooling turbo like on yours - should be lovely to drive when done :thumbup:


[Image: clubbanner.gif]

steviewevie
Posting Freak
7,993
01-01-2017, 05:22 AM
Thanks guys. It's been a long wait but I'm sure it'll be worth it. Can't wait to get it back, though I'm not going to get too excited till that's really imminent !

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
01-01-2017, 05:22 AM #498

Thanks guys. It's been a long wait but I'm sure it'll be worth it. Can't wait to get it back, though I'm not going to get too excited till that's really imminent !


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

FirebirdPhil
Posting Freak
7,101
01-01-2017, 06:44 AM
You need it back so we can all have an excuse to have a meet:lol:

"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
01-01-2017, 06:44 AM #499

You need it back so we can all have an excuse to have a meet:lol:


"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"

steviewevie
Posting Freak
7,993
01-01-2017, 06:51 AM
2tongues You need it back so we can all have an excuse to have a meet:lol:

Yep deffo up for that :thumbup:

Unfortunately the downpipe guy has failed to deliver again, but has promised Charlesworth faithfully that he'll be there on Monday with it.

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
01-01-2017, 06:51 AM #500

2tongues You need it back so we can all have an excuse to have a meet:lol:

Yep deffo up for that :thumbup:

Unfortunately the downpipe guy has failed to deliver again, but has promised Charlesworth faithfully that he'll be there on Monday with it.


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

Pages (132): Previous 148 49 50 51 52132 Next  
Recently Browsing
 3 Guest(s)
Recently Browsing
 3 Guest(s)
Related Threads…
Replies 91
Views 5,134
09-04-2024, 01:09 AM
Last Post by Sparkystav
Replies 21
Views 1,292
06-04-2024, 05:57 PM
Last Post by Lexuspat
Replies 30
Views 1,546
04-04-2024, 03:25 PM
Last Post by DannyStock
Replies 1,312
Views 102,889
25-03-2024, 02:10 AM
Last Post by ZAIS200
Replies 194
Views 9,102
23-03-2024, 03:45 PM
Last Post by Wayne
Replies 414
Views 20,405
18-02-2024, 11:42 PM
Last Post by is200turbo
Replies 1,341
Views 68,475
08-02-2024, 01:53 AM
Last Post by Wayne
Replies 4
Views 405
18-12-2023, 02:55 AM
Last Post by Rabster
Replies 20
Views 1,491
08-10-2023, 03:59 AM
Last Post by Wayne
Replies 42
Views 3,143
04-10-2023, 03:52 PM
Last Post by Wayne