My little project - IS200 Turbo
My little project - IS200 Turbo
28-01-2017, 12:12 PM
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
28-01-2017, 12:12 PM #601Nah it's made of strong stuff, my car *touches wood*
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
28-01-2017, 12:14 PM
Gord Yer mate no problemsits looking good by the way :thumbup: Steve just putting some finishing touches to it now mate (well on the phone ordering)
Cool :thumbup:
Quote:Just had to tell young Steve today that he has put your horns back in the wrong place (standard) he thought i was kidding :laugh: so left him moving them :laugh:I forgot to check on that ! I noticed they were in the wrong place when the bumper etc was off, but that was fine, they had to be moved when everything was put back anyway. So thanks for noticing they were back in the wrong place ! :biggrin:
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
28-01-2017, 12:14 PM #602Gord Yer mate no problems
Cool :thumbup:
Quote:Just had to tell young Steve today that he has put your horns back in the wrong place (standard) he thought i was kidding :laugh: so left him moving them :laugh:I forgot to check on that ! I noticed they were in the wrong place when the bumper etc was off, but that was fine, they had to be moved when everything was put back anyway. So thanks for noticing they were back in the wrong place ! :biggrin:
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
29-01-2017, 12:26 AM
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
29-01-2017, 12:26 AM #603Just to add to what Gord said earlier - Steve at Charlesworth understands very well just how I want the car to drive (one of the reasons for taking my car there). Now some of this isn't under their/Noble's control, i.e. the size of turbo will have a lot to do with it - but I expect that Steve can give it a blast when it comes back from Noble to make sure it's running as close as we can get to how I wanted.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
29-01-2017, 12:54 AM
Gord To be honest, i will not be driving it to Noble, i will just be collecting Simon or Steve
On the other hand, i would like a drive when its all done
Ps. i am on Steve's garage insurance to drive customers cars by the way Stevie :thumbup:
If I weren't working all the time, I'd have loved to take a look too! Most of the problems you seem to have have been Steve (Charlesworth) having to rely on other people to get things done like the pipework and bits not fitting properly.
But on the up now! :thumbup::thumbup:
![[Image: clubbanner.gif]](http://www.ranatech.co.uk/evo/clubbanner.gif)
Gord To be honest, i will not be driving it to Noble, i will just be collecting Simon or Steve
On the other hand, i would like a drive when its all done
Ps. i am on Steve's garage insurance to drive customers cars by the way Stevie :thumbup:
If I weren't working all the time, I'd have loved to take a look too! Most of the problems you seem to have have been Steve (Charlesworth) having to rely on other people to get things done like the pipework and bits not fitting properly.
But on the up now! :thumbup::thumbup:
ad:
02-02-2017, 11:10 AM
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
02-02-2017, 11:10 AM #606Unfortunately not, Noble apparently had a problem with one of the cars they were already working on, so the slot that should have freed up for me today didn't happen ! So still waiting ...
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
02-02-2017, 11:13 AM
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
02-02-2017, 11:13 AM #608Not sure, I haven't spoken to Charlesworth myself today, got the info that I posted off Gord. I could be wrong, but I am guessing it depends when Noble get the other car sorted ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
03-02-2017, 03:40 AM
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
03-02-2017, 03:40 AM #609Latest update is that my car is re-booked into Noble for Friday, so it should be going over there Friday morning, then coming back to Charlesworth on the following Wednesday/Thursday. So it's touch and go whether I'll get it in time for the rolling road day on the 27th !
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
Recently Browsing
13 Guest(s)
13 Guest(s)
Recently Browsing
13 Guest(s)
13 Guest(s)
Related Threads…
Replies 1,312
Views 102,880
Views 102,880
25-03-2024, 02:10 AM
Last Post byZAIS200
Last Post by
Replies 1,341
Views 68,318
Views 68,318
08-02-2024, 01:53 AM
Last Post byWayne
Last Post by
Replies 4
Views 405
Views 405
18-12-2023, 02:55 AM
Last Post byRabster
Last Post by
Replies 20
Views 1,490
Views 1,490
08-10-2023, 03:59 AM
Last Post byWayne
Last Post by
Replies 42
Views 3,139
Views 3,139
04-10-2023, 03:52 PM
Last Post byWayne
Last Post by