JapCarForum Cars, Cars, Cars! Project Cars My little project - IS200 Turbo

My little project - IS200 Turbo

My little project - IS200 Turbo

Pages (132): Previous 162 63 64 65 66132 Next  
Asi
Posting Freak
2,510
08-02-2017, 10:15 AM
Stevie Noble took the car then?

[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]
Asi
08-02-2017, 10:15 AM #631

Stevie Noble took the car then?


[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]

steviewevie
Posting Freak
7,993
09-02-2017, 06:00 AM
It's finally gone off to Noble ! :biggrin:

It went today, in the end. Noble are going to do their best to get it done as soon as they can, hopefully by the end of the week. Then Charlesworth will give it the once-over to make sure it's driving properly etc, hopefully I'll be driving it soon !
Edited 23-03-2010, 03:37 PM by steviewevie.

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
09-02-2017, 06:00 AM #632

It's finally gone off to Noble ! :biggrin:

It went today, in the end. Noble are going to do their best to get it done as soon as they can, hopefully by the end of the week. Then Charlesworth will give it the once-over to make sure it's driving properly etc, hopefully I'll be driving it soon !


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

toxo
Posting Freak
4,843
09-02-2017, 06:05 AM
Woo!

Are you still coming on Saturday if you haven't got it back yet? I can pick you up if required as I'll have an empty passenger seat.
toxo
09-02-2017, 06:05 AM #633

Woo!

Are you still coming on Saturday if you haven't got it back yet? I can pick you up if required as I'll have an empty passenger seat.

kam05
Senior Member
387
09-02-2017, 07:30 AM
steviewevie It's finally gone off to Noble ! :biggrin:

About time!

[SIGPIC][/SIGPIC]

Mods:...WIM geometry setup & fine tune, K&N Air filter, Stainless steel A/C rings, Brodit phone kit, Stainless steel clock surround, B&M Shortshifter & LED Domelight, Maplight & Sun Visors, OEM Chrome exhaust tip, OEM rubber bootliner, Fan type windscreen washer jets, LS430 Side repeaters, OEM LE grille, OEM cargo net, Front OEM armrest
kam05
09-02-2017, 07:30 AM #634

steviewevie It's finally gone off to Noble ! :biggrin:

About time!


[SIGPIC][/SIGPIC]

Mods:...WIM geometry setup & fine tune, K&N Air filter, Stainless steel A/C rings, Brodit phone kit, Stainless steel clock surround, B&M Shortshifter & LED Domelight, Maplight & Sun Visors, OEM Chrome exhaust tip, OEM rubber bootliner, Fan type windscreen washer jets, LS430 Side repeaters, OEM LE grille, OEM cargo net, Front OEM armrest

Sparkystav
Administrator
14,683
09-02-2017, 07:34 AM
excellent mate!

OutlawJapClub Admin Team
Sparkystav
09-02-2017, 07:34 AM #635

excellent mate!


OutlawJapClub Admin Team

edeath
Senior Member
525
09-02-2017, 07:41 AM
fingers and toes crossed it's ready for the Dyno run on saturday. Itching to see this beast in action Smile (probably not as much as Steve wants to drive it lol)

Was Supercharged Racing Green IS200 Sport. Now APR Stage 1 Seat Leon Cupra (220 Bhp).
edeath
09-02-2017, 07:41 AM #636

fingers and toes crossed it's ready for the Dyno run on saturday. Itching to see this beast in action Smile (probably not as much as Steve wants to drive it lol)


Was Supercharged Racing Green IS200 Sport. Now APR Stage 1 Seat Leon Cupra (220 Bhp).

dimis
Posting Freak
3,795
09-02-2017, 07:42 AM
Great mate. Finally your project comes to an end!

LEXUS IS200 - The most fun car to go sideways
dimis
09-02-2017, 07:42 AM #637

Great mate. Finally your project comes to an end!


LEXUS IS200 - The most fun car to go sideways

steviewevie
Posting Freak
7,993
09-02-2017, 07:54 AM
I'm still thinking there's an outside chance of having it for the dyno day on Saturday. Though that'll almost certainly mean driving it down on the Saturday itself and going straight to the dyno (I can't imagine it being available before Saturday at the earliest).

I'll keep you informed toxo. I still want to come along to the day anyway. Not sure if I will keep my hire car or send it back before then.

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
09-02-2017, 07:54 AM #638

I'm still thinking there's an outside chance of having it for the dyno day on Saturday. Though that'll almost certainly mean driving it down on the Saturday itself and going straight to the dyno (I can't imagine it being available before Saturday at the earliest).

I'll keep you informed toxo. I still want to come along to the day anyway. Not sure if I will keep my hire car or send it back before then.


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

russelllinn
Posting Freak
1,034
09-02-2017, 08:17 AM
I am glad it has now gone in Steve, the final hurdle is being leapt :biggrin:

If it isn't ready for the dyno just put the hire car on the rollers instead :laugh:
russelllinn
09-02-2017, 08:17 AM #639

I am glad it has now gone in Steve, the final hurdle is being leapt :biggrin:

If it isn't ready for the dyno just put the hire car on the rollers instead :laugh:

Asi
Posting Freak
2,510
09-02-2017, 08:29 AM
thats great news mate. hope it all goes well.

[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]
Asi
09-02-2017, 08:29 AM #640

thats great news mate. hope it all goes well.


[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]

Pages (132): Previous 162 63 64 65 66132 Next  
Recently Browsing
 10 Guest(s)
Recently Browsing
 10 Guest(s)
Related Threads…
Replies 91
Views 5,129
09-04-2024, 01:09 AM
Last Post by Sparkystav
Replies 21
Views 1,291
06-04-2024, 05:57 PM
Last Post by Lexuspat
Replies 30
Views 1,533
04-04-2024, 03:25 PM
Last Post by DannyStock
Replies 1,312
Views 102,879
25-03-2024, 02:10 AM
Last Post by ZAIS200
Replies 194
Views 9,095
23-03-2024, 03:45 PM
Last Post by Wayne
Replies 414
Views 20,391
18-02-2024, 11:42 PM
Last Post by is200turbo
Replies 1,341
Views 68,294
08-02-2024, 01:53 AM
Last Post by Wayne
Replies 4
Views 405
18-12-2023, 02:55 AM
Last Post by Rabster
Replies 20
Views 1,489
08-10-2023, 03:59 AM
Last Post by Wayne
Replies 42
Views 3,138
04-10-2023, 03:52 PM
Last Post by Wayne