My little project - IS200 Turbo
My little project - IS200 Turbo
Was Supercharged Racing Green IS200 Sport. Now APR Stage 1 Seat Leon Cupra (220 Bhp).
Its the Manifold Absolute Pressure sensor which works out what pressure the air coming into the engine is at - which along with RPM and Air Intake Temp works out how much fuel to put in I believe.
Was Supercharged Racing Green IS200 Sport. Now APR Stage 1 Seat Leon Cupra (220 Bhp).
The alternative system that a lot of cars use is called MAF (Mass Air Flow), which measures the quantity of air flowing through the intake, for the same purpose.
It's just two different ways of measuring how much air is coming in, either via the pressure of the air (MAP) or the volume of flow past a certain point (MAF).
Edit - Ed beat me to it lol.
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
16-02-2017, 09:12 AM #702MAP sensor measures the air pressure coming into the engine (Manifold Absolute Pressure). So it's how the engine knows how much air is coming in (obviously important so that it can calculate how much fuel to put in to get the correct air/fuel ratio).
The alternative system that a lot of cars use is called MAF (Mass Air Flow), which measures the quantity of air flowing through the intake, for the same purpose.
It's just two different ways of measuring how much air is coming in, either via the pressure of the air (MAP) or the volume of flow past a certain point (MAF).
Edit - Ed beat me to it lol.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
2tongues Sams is on standard MAP I think.
Yeah, that's what I thought too, I've PM'd him to double-check. And I have no reason to doubt Noble, after all, they mapped Sam's turbo'd IS200.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
16-02-2017, 09:13 AM #7032tongues Sams is on standard MAP I think.
Yeah, that's what I thought too, I've PM'd him to double-check. And I have no reason to doubt Noble, after all, they mapped Sam's turbo'd IS200.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
16-02-2017, 09:21 AM #704I bet thats a handful to drive:thumbup1:
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
steviewevie I don't know the top-end bhp figure. I'm not so interested in that, since I'm after driveability, but I am trying to find out if they've got a figure for it.
As for the OEM MAP sensor, Noble say it can easily cope with my turbo and has plenty of headroom.
Hmm, thats odd cause when i had mine mapped at Noble when it was Supercharged they said the standard MAP was useless/inaccurate for postive pressure and they were glad i had the Greedy one for the Emanage?
and i must agree with SPC i dont think the standard MAP sensor can read a pressure over about 0.46bar (i have the workings out from investigations i did into the FCD a few years ago). well certainly not with any accuracy anyway.
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
16-02-2017, 10:43 AM #705steviewevie I don't know the top-end bhp figure. I'm not so interested in that, since I'm after driveability, but I am trying to find out if they've got a figure for it.
As for the OEM MAP sensor, Noble say it can easily cope with my turbo and has plenty of headroom.
Hmm, thats odd cause when i had mine mapped at Noble when it was Supercharged they said the standard MAP was useless/inaccurate for postive pressure and they were glad i had the Greedy one for the Emanage?
and i must agree with SPC i dont think the standard MAP sensor can read a pressure over about 0.46bar (i have the workings out from investigations i did into the FCD a few years ago). well certainly not with any accuracy anyway.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
17-02-2017, 03:40 AM #706I'm confused about the whole stock MAP sensor thing now. Trying to get more info on this from Charlesworth/Noble. Given I had the info third hand, it's possible that something has got confused along the way.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
Looks like some crossed wires before, because Noble say the stock MAP sensor only works up to about 0.5 bar, which is what some of you have said.
So I've ordered a GReddy MAP sensor (up to 3 bar). I'm a bit perplexed at how this has managed to fall through the cracks, because no-one seems to have realised that I needed one up till now. Oh well. Ordered one off eBay for £100, and I will send it straight to Noble.
Think we will probably stick with the OEM injectors still, though if they do get to the stage where they max out, we'll have to go with the uprated ones.
Pretty frustrated because it was so close to being finished. And Easter being in the middle isn't really going to help.
:Sulk:
Edit - Sam's does have a GReddy MAP sensor.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
17-02-2017, 04:30 AM #707Hmm, ok, all has become clear now.
Looks like some crossed wires before, because Noble say the stock MAP sensor only works up to about 0.5 bar, which is what some of you have said.
So I've ordered a GReddy MAP sensor (up to 3 bar). I'm a bit perplexed at how this has managed to fall through the cracks, because no-one seems to have realised that I needed one up till now. Oh well. Ordered one off eBay for £100, and I will send it straight to Noble.
Think we will probably stick with the OEM injectors still, though if they do get to the stage where they max out, we'll have to go with the uprated ones.
Pretty frustrated because it was so close to being finished. And Easter being in the middle isn't really going to help.
:Sulk:
Edit - Sam's does have a GReddy MAP sensor.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
Unregistered
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
17-02-2017, 05:24 AM #710Gutted for you mate, I know exactly how your feeling. But if a job is worth doing etc etc.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
10 Guest(s)
10 Guest(s)
Views 102,868
Last Post by
Views 68,208
Last Post by
Views 404
Last Post by
Views 1,487
Last Post by
Views 3,137
Last Post by