My little project - IS200 Turbo
My little project - IS200 Turbo
![[Image: clubbanner.gif]](http://www.ranatech.co.uk/evo/clubbanner.gif)
06-03-2017, 11:41 PM
steviewevie Thanks guys :biggrin:
Stav - thanks for the PM and your help. Russell - I am not far from Farnham, so let me know next time you're coming down !
I need to update my car's entry in the Garage now, get that all up to date.
I commented previously on how my gauge pod (which sits on top of the a/c controls and vents in the middle) is half-finished. I'm not really happy with it now that it's got the dials in and I can use it. Right now the dials are pointing straight-ahead, and I don't really like it. I'm going to try turning the dials a bit towards me, and see how that looks. Not entirely convinced I like the pod itself now either, though I will try turning it first, leave it in its half-finished state (it's just held in place with tape ! :blushing: ), and have a think about it. I would post up a pic but it looks rubbish :laugh:
What about a TRD gauge pod? Are you interested for one of these? The only con is that is 60mm dia and you have got gauges 52mm. Or what about a Greddy A-pillar gauge pod? Have a look here mate:
http://www.zerotohundred.com/newforums/e...ost4119820
Edited 18-04-2010, 09:27 AM by dimis.
LEXUS IS200 - The most fun car to go sideways
steviewevie Thanks guys :biggrin:
Stav - thanks for the PM and your help. Russell - I am not far from Farnham, so let me know next time you're coming down !
I need to update my car's entry in the Garage now, get that all up to date.
I commented previously on how my gauge pod (which sits on top of the a/c controls and vents in the middle) is half-finished. I'm not really happy with it now that it's got the dials in and I can use it. Right now the dials are pointing straight-ahead, and I don't really like it. I'm going to try turning the dials a bit towards me, and see how that looks. Not entirely convinced I like the pod itself now either, though I will try turning it first, leave it in its half-finished state (it's just held in place with tape ! :blushing: ), and have a think about it. I would post up a pic but it looks rubbish :laugh:
What about a TRD gauge pod? Are you interested for one of these? The only con is that is 60mm dia and you have got gauges 52mm. Or what about a Greddy A-pillar gauge pod? Have a look here mate:
http://www.zerotohundred.com/newforums/e...ost4119820
LEXUS IS200 - The most fun car to go sideways
07-03-2017, 12:02 AM
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
07-03-2017, 12:02 AM #943Thanks. It's personal preference, but I really don't like pillar pods. They just feel too close to me when I'm driving. As you say the TRD pods have the wrong size holes, though I guess it would be possible to adjust that. And it points straight ahead too.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
07-03-2017, 12:05 AM
steviewevie Thanks. It's personal preference, but I really don't like pillar pods. They just feel too close to me when I'm driving. As you say the TRD pods have the wrong size holes, though I guess it would be possible to adjust that. And it points straight ahead too.
Here mate if you are interested you could get one of this, it is cheap and seems to be good quality but i am not sure if it is original (looks like replica)
http://www.zerotohundred.com/newforums/i...-hood.html
LEXUS IS200 - The most fun car to go sideways
steviewevie Thanks. It's personal preference, but I really don't like pillar pods. They just feel too close to me when I'm driving. As you say the TRD pods have the wrong size holes, though I guess it would be possible to adjust that. And it points straight ahead too.
Here mate if you are interested you could get one of this, it is cheap and seems to be good quality but i am not sure if it is original (looks like replica)
http://www.zerotohundred.com/newforums/i...-hood.html
LEXUS IS200 - The most fun car to go sideways
08-03-2017, 12:21 AM
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
The work done to your car looks excellent mate :thumbup1:
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
08-03-2017, 12:33 AM
I've updated the garage with my turbo and other latest mods now. Still got a few more pictures to take and upload for the new bits though.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
08-03-2017, 12:33 AM #947Thanks guys :biggrin:
I've updated the garage with my turbo and other latest mods now. Still got a few more pictures to take and upload for the new bits though.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
08-03-2017, 12:42 AM
Waiting for more pics, as you have had other mods done as well? uprated brakes etc? Love to see some pics of these other mods too.
[SIGPIC][/SIGPIC]
Mods:...WIM geometry setup & fine tune, K&N Air filter, Stainless steel A/C rings, Brodit phone kit, Stainless steel clock surround, B&M Shortshifter & LED Domelight, Maplight & Sun Visors, OEM Chrome exhaust tip, OEM rubber bootliner, Fan type windscreen washer jets, LS430 Side repeaters, OEM LE grille, OEM cargo net, Front OEM armrest
Love the work that you have had done to your car Stevie- well done. Its taken a while, but you got there in the end.
Waiting for more pics, as you have had other mods done as well? uprated brakes etc? Love to see some pics of these other mods too.
[SIGPIC][/SIGPIC]
Mods:...WIM geometry setup & fine tune, K&N Air filter, Stainless steel A/C rings, Brodit phone kit, Stainless steel clock surround, B&M Shortshifter & LED Domelight, Maplight & Sun Visors, OEM Chrome exhaust tip, OEM rubber bootliner, Fan type windscreen washer jets, LS430 Side repeaters, OEM LE grille, OEM cargo net, Front OEM armrest
08-03-2017, 12:47 AM
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
08-03-2017, 12:47 AM #949Yeah I will take some more pics and post them up here too, as well as in the Garage.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
Recently Browsing
2 Guest(s)
2 Guest(s)
Recently Browsing
2 Guest(s)
2 Guest(s)
Related Threads…
Replies 1,312
Views 102,865
Views 102,865
25-03-2024, 02:10 AM
Last Post byZAIS200
Last Post by
Replies 1,341
Views 67,963
Views 67,963
08-02-2024, 01:53 AM
Last Post byWayne
Last Post by
Replies 4
Views 404
Views 404
18-12-2023, 02:55 AM
Last Post byRabster
Last Post by
Replies 20
Views 1,485
Views 1,485
08-10-2023, 03:59 AM
Last Post byWayne
Last Post by
Replies 42
Views 3,135
Views 3,135
04-10-2023, 03:52 PM
Last Post byWayne
Last Post by