Help identify the brakes
Help identify the brakes
R32 GTR (Non V-Spec) Sumitomo caliper
Master Cylinder diam (mm) - 25.4
Front Caliper Piston(diam x qty) - 40.4 ×4
Front rotors (diam x thk) - 296×32
Rear Caliper Piston(diam x qty) - 38.18×2
Rear Rotors (diam x thk) - 297×18
R32 GTR V-Spec / R33 / 34 GTR with Brembos
Master Cylinder diam (mm) - 26.9 568.32mm²
Front Caliper Piston(diam x qty) - (44+3Cool×2 ... leading pistons smaller then trailing 5309.29mm²
Front rotors (diam x thk) - 324×30
Rear Caliper Piston(diam x qty) - 40×2 2513.27mm² ratio FR = 2.1125
Rear Rotors (diam x thk) - 300×22
Total area - 7822.56 Brake to master ratio - 13.76
Will keep searching mate and see what else i can find :thumbup1:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
easier doing it here than on fb mate :lol:
R32 GTR (Non V-Spec) Sumitomo caliper
Master Cylinder diam (mm) - 25.4
Front Caliper Piston(diam x qty) - 40.4 ×4
Front rotors (diam x thk) - 296×32
Rear Caliper Piston(diam x qty) - 38.18×2
Rear Rotors (diam x thk) - 297×18
R32 GTR V-Spec / R33 / 34 GTR with Brembos
Master Cylinder diam (mm) - 26.9 568.32mm²
Front Caliper Piston(diam x qty) - (44+3Cool×2 ... leading pistons smaller then trailing 5309.29mm²
Front rotors (diam x thk) - 324×30
Rear Caliper Piston(diam x qty) - 40×2 2513.27mm² ratio FR = 2.1125
Rear Rotors (diam x thk) - 300×22
Total area - 7822.56 Brake to master ratio - 13.76
Will keep searching mate and see what else i can find :thumbup1:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
R32 GTST
Master Cylinder diam (mm) - 25.4 area 506.71mm^2
Front Caliper Piston(diam x qty) - 40.4 ?4 = 5127.58mm^2
Front rotors (diam x thk) - 280?30
Rear Caliper Piston(diam x qty) - 38.18?2 = 2289.78mm^2 ratio FR = 2.239
Rear Rotors (diam x thk) - 297?18
total 7417.36 brake to master ratio 14.63
Which would mean its the 2.0ltr model from 1989-1994
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
so ...
R32 GTST
Master Cylinder diam (mm) - 25.4 area 506.71mm^2
Front Caliper Piston(diam x qty) - 40.4 ?4 = 5127.58mm^2
Front rotors (diam x thk) - 280?30
Rear Caliper Piston(diam x qty) - 38.18?2 = 2289.78mm^2 ratio FR = 2.239
Rear Rotors (diam x thk) - 297?18
total 7417.36 brake to master ratio 14.63
Which would mean its the 2.0ltr model from 1989-1994
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
might try nissan directly in the morning see if they have any....
thats what its kinda looking like guess the only way is to find a recon kit an giv it a go ....
might try nissan directly in the morning see if they have any....
so hopefully when painted they will look good
cared:![[Image: 5bd59c64.jpg]](http://i332.photobucket.com/albums/m330/Rabster_2008/Brakes/5bd59c64.jpg)
![[Image: 3b191d90.jpg]](http://i332.photobucket.com/albums/m330/Rabster_2008/Brakes/3b191d90.jpg)
![[Image: d719b3b7.jpg]](http://i332.photobucket.com/albums/m330/Rabster_2008/Brakes/d719b3b7.jpg)
![[Image: d48906f6.jpg]](http://i332.photobucket.com/albums/m330/Rabster_2008/Brakes/d48906f6.jpg)
what are your thoughts ...
ok here are the pics that have been stripped using nitromours and are smooth ish now
so hopefully when painted they will look goodcared:
what are your thoughts ...
this will allow the upgrade and hopefully stop well they were on Dave Reeds car
the current setup is still lexus standard just with mintex pads on the front standard lexus on the rear....
this will allow the upgrade and hopefully stop well they were on Dave Reeds car
just hope the poxy things fit now lol
ok have just ordered 2 seal kits one per side and a grand total including delivery of 47.98
just hope the poxy things fit now lol
1 Guest(s)
1 Guest(s)
Views 416
Last Post by
Views 586
Last Post by
Views 1,888
Last Post by
Views 406
Last Post by