Phaebo IS200 Supercharged (NL)
Phaebo IS200 Supercharged (NL)
remove the 'supercharged' logos, If someone wants to race at a red light you can race the **** out of them
where did you get the dress up kit from?
Thanks for the comment guys
@Chris0121
The specs off the wheels are
18x 8.5J ET 35
18x 9.5J ET 35
But you will need to roll the arches.
About the air filter. Since i have a left hand drive car i cant make a cold air intake just like the others becaus the ABS unit and the powersteering bottle are In that place so i needed to find out some other way to fit the air filter.
thats when i decided to great something else.
The cone air filter had a heat shield around it so the heat stays outside and also the OEM air intake pipe feeds the air filter directly with cold air. And luckily the OEM air pipe fitted directly over the cone filter and i bolted it with 4 bolts so it wont slide off.
Now i have the nice sound of the wining supercharger and the cold air intake and also the cold air from the oem setup.
@ is300_dino
yes i have been thinking about polishing the charger. Thats on my to do list.
By the way
thanks to the moderator for fixing my pictures on the first post.
@is300_dino
here i get the engine dress ups from
http://stores.ebay.co.uk/Evolution-Found...34.c0.m322
LOL @ silent tuner but i think its a nice little tough up of the car having those little logos. I dont mind the people seeing that i have a supercharger. I am proud to have a supercharger on my car becaus here in the netherlands arent a lot of Supercharged IS200.
Last update for so far.
Since I am finished with the engine power for the moment i wanted to give it a go on the Dyno.
2 weeks ago i went to dynocentre.nl to measure the power on the dyno.
I was hoping for anything above 200 HP but here are the results and i am very happy with the results.
211.6 HP with 253NM of torque !!!
cheers dude more stuff for my list :presents2:
Nice motor mate. Some good touches been added