JapCarForum Cars, Cars, Cars! Project Cars Stix's IS200

Stix's IS200

Stix's IS200

Pages (45): Previous 139 40 41 42 4345 Next  
Ste176
Member
202
03-03-2020, 11:32 PM
Stix44 Today I have mostly been working on Ste's car.

But before that I finished cleaning the coilovers and then James arrived to collect them and the smoked fog lights.

So anyway Ste's SC cable snapped last night so we went to replace it ... Then the homemade (by someone else) throttlebody arm snapped!

... So I made him a new one! It was a tremendous piece of work if I do say so myself!

No pictures but I'm sure Ste can provide some Smile

An excellent Saturday in my opinion!

It was a good day mate! And top work, ill take a pic of it today to show off your hard work Smile
Ste176
03-03-2020, 11:32 PM #401

Stix44 Today I have mostly been working on Ste's car.

But before that I finished cleaning the coilovers and then James arrived to collect them and the smoked fog lights.

So anyway Ste's SC cable snapped last night so we went to replace it ... Then the homemade (by someone else) throttlebody arm snapped!

... So I made him a new one! It was a tremendous piece of work if I do say so myself!

No pictures but I'm sure Ste can provide some Smile

An excellent Saturday in my opinion!

It was a good day mate! And top work, ill take a pic of it today to show off your hard work Smile

Ste176
Member
202
03-03-2020, 11:34 PM
Also, glad the skirt and bumper is sorted! Car is getting back to normal Smile
Ste176
03-03-2020, 11:34 PM #402

Also, glad the skirt and bumper is sorted! Car is getting back to normal Smile

S
Banned
1,153
04-03-2020, 08:12 AM
Ste176 It was a good day mate! And top work, ill take a pic of it today to show off your hard work Smile

Good lad!

Ste176 Also, glad the skirt and bumper is sorted! Car is getting back to normal Smile

Thanks mate Smile
S
04-03-2020, 08:12 AM #403

Ste176 It was a good day mate! And top work, ill take a pic of it today to show off your hard work Smile

Good lad!

Ste176 Also, glad the skirt and bumper is sorted! Car is getting back to normal Smile

Thanks mate Smile

S
Banned
1,153
09-03-2020, 12:39 PM
Sort of update.

For the past 3/4 days Ive been trying to get the car back on the road.

First I fitted the new injector plugs - now i had to guess which way they needed to be wired because the instructions were in Japanese and the pictures were in black and white.

So what I did was I looked at the standard injectors and plugs and assumed that the new injectors would be the same so I cut off the old plugs and fitted all of the new ones.

I refitted the charger kit (now with all SS fixings! Smile) - I set the fuel pressure and started the car ... it ran but with a mis every few cycles. I (wrongly) thought this was because I had wired the plugs wrong, I checked them all and they were all the same/looked fine to me.

So I thought I'd try swapping them, so I swapped them and ... it proceeded to start Det'ing its head off. I immediatley shut it down and did what every sane person would do ... send Stav a message!

Spoke to Stav and he advised me I was being a knob and the injectors were just too big to use without a map.

So I removed them and refitted the old injectors with the old plugs ... they proceeded to spray petrol EVERYWHERE!

For some reason they no longer seal inside the fuel rail, I suspect this is because the bigger injectors are ever so slightly taller than the originals and when I fitted them with the original "top hats" (thats what I call them anyway) the top hats were permenantly squashed so no longer push the standard injectors back into the fuel rail and therefore dont seal but who knows.

I then when to the sick bucket and pulled the rail, injectors and top hats and fitted them to my car and they seal perfectly ... then I found the FPR was/is/has been leaking so I sacked it off till tomorrow.

I did however fit new metal kickplates!

Before:

[Image: IMAG0547.jpg]

After:

[Image: IMAG0548.jpg]

Much better and not bad as payment for helping fit a clutch Smile

BIG Thanks to:

Stav - for being the walking encyclopedia as per usual and for taking the time while in the pub to help!

Jay - for coming up with some extra molex pins (that I didnt use) cos I'm an idiot and sort of broke the originals

Ste - for picking me up, taking me to mcdonalds, the sick buckets secret storage facility and then home again so I could get the parts i needed to sort mine!

All in all so far I have a properly **** weekend so far.
S
09-03-2020, 12:39 PM #404

Sort of update.

For the past 3/4 days Ive been trying to get the car back on the road.

First I fitted the new injector plugs - now i had to guess which way they needed to be wired because the instructions were in Japanese and the pictures were in black and white.

So what I did was I looked at the standard injectors and plugs and assumed that the new injectors would be the same so I cut off the old plugs and fitted all of the new ones.

I refitted the charger kit (now with all SS fixings! Smile) - I set the fuel pressure and started the car ... it ran but with a mis every few cycles. I (wrongly) thought this was because I had wired the plugs wrong, I checked them all and they were all the same/looked fine to me.

So I thought I'd try swapping them, so I swapped them and ... it proceeded to start Det'ing its head off. I immediatley shut it down and did what every sane person would do ... send Stav a message!

Spoke to Stav and he advised me I was being a knob and the injectors were just too big to use without a map.

So I removed them and refitted the old injectors with the old plugs ... they proceeded to spray petrol EVERYWHERE!

For some reason they no longer seal inside the fuel rail, I suspect this is because the bigger injectors are ever so slightly taller than the originals and when I fitted them with the original "top hats" (thats what I call them anyway) the top hats were permenantly squashed so no longer push the standard injectors back into the fuel rail and therefore dont seal but who knows.

I then when to the sick bucket and pulled the rail, injectors and top hats and fitted them to my car and they seal perfectly ... then I found the FPR was/is/has been leaking so I sacked it off till tomorrow.

I did however fit new metal kickplates!

Before:

[Image: IMAG0547.jpg]

After:

[Image: IMAG0548.jpg]

Much better and not bad as payment for helping fit a clutch Smile

BIG Thanks to:

Stav - for being the walking encyclopedia as per usual and for taking the time while in the pub to help!

Jay - for coming up with some extra molex pins (that I didnt use) cos I'm an idiot and sort of broke the originals

Ste - for picking me up, taking me to mcdonalds, the sick buckets secret storage facility and then home again so I could get the parts i needed to sort mine!

All in all so far I have a properly **** weekend so far.

Sparkystav
Administrator
14,683
09-03-2020, 01:04 PM
Lol sounds like a lot of effort mate. Hope you get the fpr sorted. Glad I could help.

OutlawJapClub Admin Team
Sparkystav
09-03-2020, 01:04 PM #405

Lol sounds like a lot of effort mate. Hope you get the fpr sorted. Glad I could help.


OutlawJapClub Admin Team

Ste176
Member
202
09-03-2020, 01:25 PM
Epic post mate.
More than welcome, also glad you like your kick plates. They look way better on the green!

No doubt ill see you sometime tomorrow Smile
Ste176
09-03-2020, 01:25 PM #406

Epic post mate.
More than welcome, also glad you like your kick plates. They look way better on the green!

No doubt ill see you sometime tomorrow Smile

S
Banned
1,153
09-03-2020, 01:45 PM
Sparkystav Lol sounds like a lot of effort mate. Hope you get the fpr sorted. Glad I could help.

So do I! I'm Hoping some thread tape will sort it but after the week I've had I've stopped expecting anything to work.
S
09-03-2020, 01:45 PM #407

Sparkystav Lol sounds like a lot of effort mate. Hope you get the fpr sorted. Glad I could help.

So do I! I'm Hoping some thread tape will sort it but after the week I've had I've stopped expecting anything to work.

S
Banned
1,153
09-03-2020, 01:46 PM
Ste176 Epic post mate.
More than welcome, also glad you like your kick plates. They look way better on the green!

No doubt ill see you sometime tomorrow Smile

Cool mate, just send me a message, I'll probably be up early so I can crack on.

Also: Shell Whitemare Pool have Nitro. (I think)
S
09-03-2020, 01:46 PM #408

Ste176 Epic post mate.
More than welcome, also glad you like your kick plates. They look way better on the green!

No doubt ill see you sometime tomorrow Smile

Cool mate, just send me a message, I'll probably be up early so I can crack on.

Also: Shell Whitemare Pool have Nitro. (I think)

James S
Posting Freak
1,240
09-03-2020, 11:14 PM
Like the stainless kick plates, the rest sounds proper stressful! Lol! Hope you get it sorted soon.
James S
09-03-2020, 11:14 PM #409

Like the stainless kick plates, the rest sounds proper stressful! Lol! Hope you get it sorted soon.

S
Banned
1,153
09-03-2020, 11:58 PM
James S Like the stainless kick plates, the rest sounds proper stressful! Lol! Hope you get it sorted soon.

Thanks mate, my favourite part is they took all of 20 seconds to change Smile

It has been! Hopefully get it sorted today though!
S
09-03-2020, 11:58 PM #410

James S Like the stainless kick plates, the rest sounds proper stressful! Lol! Hope you get it sorted soon.

Thanks mate, my favourite part is they took all of 20 seconds to change Smile

It has been! Hopefully get it sorted today though!

Pages (45): Previous 139 40 41 42 4345 Next  
Recently Browsing
 4 Guest(s)
Recently Browsing
 4 Guest(s)
Related Threads…
Replies 91
Views 5,042
09-04-2024, 01:09 AM
Last Post by Sparkystav
Replies 21
Views 1,261
06-04-2024, 05:57 PM
Last Post by Lexuspat
Replies 1,312
Views 102,659
25-03-2024, 02:10 AM
Last Post by ZAIS200
Replies 194
Views 9,056
23-03-2024, 03:45 PM
Last Post by Wayne
Replies 414
Views 20,044
18-02-2024, 11:42 PM
Last Post by is200turbo
Replies 1,341
Views 67,522
08-02-2024, 01:53 AM
Last Post by Wayne
Replies 4
Views 398
18-12-2023, 02:55 AM
Last Post by Rabster
Replies 20
Views 1,469
08-10-2023, 03:59 AM
Last Post by Wayne
Replies 42
Views 3,106
04-10-2023, 03:52 PM
Last Post by Wayne
Replies 28
Views 1,926
17-05-2023, 11:25 AM
Last Post by IS200_rider