Is200 Kompressor
Is200 Kompressor
So the PCV and the breather are not connected as of, critical to each other.
I'll just root the breather to s/c inlet and leave the rest as is.
Cheers for reply
DannyStock
24-11-2023, 10:43 AM #21I think Iam, I've only ever really dealt with classic mini's hich is a simple as it gets, let alone adding boost.
So the PCV and the breather are not connected as of, critical to each other.
I'll just root the breather to s/c inlet and leave the rest as is.
Cheers for reply
Another relatively substantial order has been made for the little odds 'n' sods that I needed after the initial mock up.
So fingers crossed I should have everything to hand to build this up, and thus a long weekend has been booked off work to mackle it all together.
In the meantime, aside from losing count as to how many times the bumper has been on & off, I wasn't happy with the new placement of the PSF cooler. The power steering has never had a very consistent feel to it either way and the old cooler pipe is pretty grotty.
So a quick trip round saw some 10mm pipe and hose and a few hours later;
![[Image: IMAG0821.jpg]](http://s261.photobucket.com/user/CANNYDOE/media/IMAG0821.jpg.html)
![[Image: IMAG0822.jpg]](http://s261.photobucket.com/user/CANNYDOE/media/IMAG0822.jpg.html)
Hopefully now it will see some air flow as the IC has taken it's old seat.
Also.
These;
![[Image: 16144728_10155672351748272_990877695_n.jpg]](http://s261.photobucket.com/user/CANNYDOE/media/16144728_10155672351748272_990877695_n.jpg.html)
An accidental decision is also to de-AC the car.
After catching the AC rad with the angle grinder, it makes sense to rid the car of the pump, pipes & rad. I wasn't using it anyway, and now i can't even if i wanted to - It's got a hole in it (Y)
Also means a lot of what i was working around previously with pipe rooting will be out of the question. Good.
DannyStock
13-12-2023, 04:35 PM #22January is long & expensive
Another relatively substantial order has been made for the little odds 'n' sods that I needed after the initial mock up.
So fingers crossed I should have everything to hand to build this up, and thus a long weekend has been booked off work to mackle it all together.
In the meantime, aside from losing count as to how many times the bumper has been on & off, I wasn't happy with the new placement of the PSF cooler. The power steering has never had a very consistent feel to it either way and the old cooler pipe is pretty grotty.
So a quick trip round saw some 10mm pipe and hose and a few hours later;
Hopefully now it will see some air flow as the IC has taken it's old seat.
Also.
These;
An accidental decision is also to de-AC the car.
After catching the AC rad with the angle grinder, it makes sense to rid the car of the pump, pipes & rad. I wasn't using it anyway, and now i can't even if i wanted to - It's got a hole in it (Y)
Also means a lot of what i was working around previously with pipe rooting will be out of the question. Good.
Sent from my iPad using Tapatalk
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
14-12-2023, 02:41 PM #24Nice update mate!
Sent from my iPad using Tapatalk
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Ideally I was hoping to have it had a test run under my belt by tonight, but dog walking, Mrs ferrying and indecisive IC piping combinations have left 80% complete.
Plenty of room on the O/S for piping, now the aircon is out of the way.
A strangely satisfying feeling as the AC pump dropped out the bottom of the bay (Y)
![[Image: IMAG0829.jpg]](http://s261.photobucket.com/user/CANNYDOE/media/IMAG0829.jpg.html)
The leak;
![[Image: IMAG0826.jpg]](http://s261.photobucket.com/user/CANNYDOE/media/IMAG0826.jpg.html)
-IC is in.
-Supercharger is in & oiled.
-Manifolds tweaked, prepped, painted and bolted in.
-Bypass mounted.
-Cold side piping rooted satisfactorily.
-Hot side piping rooted (not so satisfactorily, will continue to ponder and wish I hadn't chopped that U bend in half).
-Drive belt in place.
-S/C intake prepared.
All thats left is to;
-Plumb in vacuum pipes & bypass.
-Rig air temp sensor.
-"Revise" hot side piping...
So enjoy some pics of the S/C manifolds;
![[Image: IMAG0833.jpg]](http://s261.photobucket.com/user/CANNYDOE/media/IMAG0833.jpg.html)
![[Image: IMAG0835.jpg]](http://s261.photobucket.com/user/CANNYDOE/media/IMAG0835.jpg.html)
![[Image: IMAG0825.jpg]](http://s261.photobucket.com/user/CANNYDOE/media/IMAG0825.jpg.html)
![[Image: IMAG0824.jpg]](http://s261.photobucket.com/user/CANNYDOE/media/IMAG0824.jpg.html)
DannyStock
17-12-2023, 10:07 AM #25So the looong weekend has begun.
Ideally I was hoping to have it had a test run under my belt by tonight, but dog walking, Mrs ferrying and indecisive IC piping combinations have left 80% complete.
Plenty of room on the O/S for piping, now the aircon is out of the way.
A strangely satisfying feeling as the AC pump dropped out the bottom of the bay (Y)
The leak;
-IC is in.
-Supercharger is in & oiled.
-Manifolds tweaked, prepped, painted and bolted in.
-Bypass mounted.
-Cold side piping rooted satisfactorily.
-Hot side piping rooted (not so satisfactorily, will continue to ponder and wish I hadn't chopped that U bend in half).
-Drive belt in place.
-S/C intake prepared.
All thats left is to;
-Plumb in vacuum pipes & bypass.
-Rig air temp sensor.
-"Revise" hot side piping...
So enjoy some pics of the S/C manifolds;
![[Image: IMAG0838.jpg]](http://s261.photobucket.com/user/CANNYDOE/media/IMAG0838.jpg.html)
![[Image: IMAG0839.jpg]](http://s261.photobucket.com/user/CANNYDOE/media/IMAG0839.jpg.html)
![[Image: IMAG0841.jpg]](http://s261.photobucket.com/user/CANNYDOE/media/IMAG0841.jpg.html)
![[Image: IMAG0851.jpg]](http://s261.photobucket.com/user/CANNYDOE/media/IMAG0851.jpg.html)
Only had it ticking over etc for fault finding.
Shake down run tomorrow
Pics to follow
DannyStock
18-12-2023, 11:55 AM #28We are done.
Only had it ticking over etc for fault finding.
Shake down run tomorrow
Pics to follow
sent from Admin HQ via tapatalk
![[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]](http://i1227.photobucket.com/albums/ee440/davis5835/Mobile%20Uploads/FB_IMG_1474048273787_zpsnbfq6a3s.jpg)
3 Guest(s)
3 Guest(s)
Views 102,686
Last Post by
Views 67,533
Last Post by
Views 404
Last Post by
Views 1,469
Last Post by
Views 3,109
Last Post by
Views 1,927
Last Post by